|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-02-2015, 12:47 AM
|
#1 |
|
Registered User
Join Date: Jan 2015
Location: Rochester, WA
Posts: 259
|
Hello, new to the AD series trucks.
Hi All,
I am new to the AD series of Chevy trucks, and in the last week I have picked-up a new project. I picked up a 1950 three-window 3600 series, very rust free, with all the body parts except front bumper and no motor or tranny. This was an Eastern Washington and before that California truck and is very solid, especially compared to the 1952 five-window 3100 series cab and nose I also got. Been reading through the various threads on frame swaps and see that most are geared towards the short bed styles and seems the way to go there is the single cab, longbed S-10. What about the longer 125 1/4" wheelbase 3/4 tons? Do you just shorten or replace the bed? The frame it is sitting on currently is factory from firewall back, and has a later 70-80's series truck clip welded on. The weld job was not done by myself or the fellow I purchased the truck from, and to be honest, I would not trust it as it is. So something needs to be done. Anyway, enjoying reading through and seeing all the pictures and progress. Thanks for allowing to join and hope to have something to show over the next few months. Last edited by Big Daddy Bear; 02-02-2015 at 12:54 AM. Reason: Correction |
|
|
|
02-02-2015, 12:48 AM
|
#2 |
|
Registered User
Join Date: Jan 2015
Location: Rochester, WA
Posts: 259
|
Re: Hello, new to the AD series trucks.
The 1950 three-window.
|
|
|
|
|
02-02-2015, 01:43 AM
|
#3 |
|
Registered User
 
Join Date: Aug 2012
Location: West Side of the valley, CA
Posts: 878
|
Re: Hello, new to the AD series trucks.
welcome to the site!
|
|
|
|
|
02-02-2015, 03:48 AM
|
#4 |
|
Registered User
Join Date: May 2010
Location: Kenova, WV
Posts: 821
|
Re: Hello, new to the AD series trucks.
welcome aboard
|
|
|
|
|
02-02-2015, 06:05 AM
|
#5 |
|
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: Hello, new to the AD series trucks.
You can use the extended cab s10 frame for your long bed truck. Just take the leaf springs off and turn them around so that the rear eyelet is now at the front, that will give you the proper wheel base.
__________________
 1949 Five Window, 1973 Step Side, 2000 Z71 |
|
|
|
|
02-02-2015, 01:19 PM
|
#6 |
|
Registered User
Join Date: Jan 2015
Location: Rochester, WA
Posts: 259
|
Re: Hello, new to the AD series trucks.
Thank you for the warm welcomes!! This looks like a great forum with lots of helpful info.
Thank you ghettoluxury, that is really going to help. Right now my time is going into stripping the 52 cab of as many savable pieces and panels, including cutting out the corner windows as I may tackle turning the 50 into a five window. |
|
|
|
|
02-03-2015, 08:49 AM
|
#7 |
|
Registered User
Join Date: Jun 2012
Location: wind lake WI
Posts: 1,747
|
Re: Hello, new to the AD series trucks.
take a look at my build and welcome.
__________________
LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive! |
|
|
|
|
02-03-2015, 12:14 PM
|
#8 |
|
Registered User
Join Date: Jan 2015
Location: Rochester, WA
Posts: 259
|
Re: Hello, new to the AD series trucks.
Thanks crossfire84, read through your build, great work! Looking forward to seeing the finished truck.
|
|
|
|
|
02-03-2015, 01:06 PM
|
#9 |
|
Registered User
Join Date: Jan 2015
Location: Santa Monica
Posts: 264
|
Re: Hello, new to the AD series trucks.
Welcome aboard and congrats on your project(s)
You should be glad you didn't get an old, crappy motor and tranny that you'd be tempted to overhaul... now you can put good $ into a fresh drivetrain!
__________________
Déjà vu. It's that feeling you get when you hit your thumb with the hammer a second time '59 Chevy 3100 Stepside |
|
|
|
|
02-03-2015, 01:20 PM
|
#10 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: Hello, new to the AD series trucks.
Welcome looks like a nice place to start.
Be bold, embrace the long bed.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
02-03-2015, 01:30 PM
|
#11 |
|
Registered User
Join Date: Jan 2014
Location: New Bloomfield pa.
Posts: 644
|
Re: Hello, new to the AD series trucks.
Welcome....you will have fun on here and plenty of people to learn from
|
|
|
|
|
02-03-2015, 04:37 PM
|
#12 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: Hello, new to the AD series trucks.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
02-05-2015, 01:41 AM
|
#13 | |
|
Registered User
Join Date: Jan 2015
Location: Rochester, WA
Posts: 259
|
Re: Hello, new to the AD series trucks.
Quote:
If it weren't for the previous butchering of the factory frame, I would probably not consider a swap. To be fair, the welder may have known exactly what he was doing, and may not have even finished, but as is it just does not look safe, so something has to change. I like the 3/4 ton truck, since my bride can use it to haul her horse trailer, which is something that fell out of her mouth as soon as she seen the craigslist ad! She has always liked the style of the fat-fendered trucks, more so than the 1969 C30, dually flatbed she uses now. So what I heard when she said that was, "You can get two trucks!!" Enjoying reading through the threads and seeing the pictures. Thanks to everyone! |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
