Will these work on our trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shifty One · 02-05-2015, 02:29 PM

http://www.summitracing.com/parts/wvi-82-600805

Wheel Vintiques 82 Series 16x10 (8 on 6-1/2) with 5" backspace. I want to use my OE dog-dish hubcaps as well.

(my truck is an 87 V20)

68panelman · 02-11-2015, 10:56 AM

Call Summit, They'll be able to give you a definite answer.

obijuan · 02-15-2015, 12:40 PM

not a great fit with the 5" backspace. that will tuck the wheels pretty far under and may contact the steering arms. thats made for the newer ifs trucks.
ideally a 4" backspace but i dont know about the caps fitment.

that wheel is basically having the wheel mount surface at the center of the wheel. test fit a different wheel and compare the changes in wheel width at the backside of the barrel to see if it will hit anything.

Shifty One · 02-15-2015, 12:47 PM

That's what I was afraid of...I guess that I'll stay with the original plan, and have Stockton widen my OE's...

y5mgisi · 02-17-2015, 11:32 PM

Not so fast. I dont know what those ones are for sure, but several folks on this site have used the 10" wide wheel vintiques and they look amazing! I'll find some pic.s

y5mgisi · 02-17-2015, 11:35 PM

Here is one.

[IMG]

[/IMG]

y5mgisi · 02-17-2015, 11:44 PM

Here is Belzeburb.

http://67-72chevytrucks.com/vboard/s...&postcount=133

y5mgisi · 02-17-2015, 11:55 PM

y5mgisi · 02-17-2015, 11:58 PM

Definitely not too tucked in.

**special-K** · 02-18-2015, 08:12 AM

I believe the 16.5 x 9.75s had about a 5" backspace. There were two offsets available The ones with less backspace were intended as rear wheels for C/20s and C/30s, prior to big Dooley pickups

Shifty One · 02-18-2015, 10:30 AM

Excellent...your trucks look great!

02-05-2015, 02:29 PM	#1
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 742	Will these work on our trucks? http://www.summitracing.com/parts/wvi-82-600805 Wheel Vintiques 82 Series 16x10 (8 on 6-1/2) with 5" backspace. I want to use my OE dog-dish hubcaps as well. (my truck is an 87 V20)

02-11-2015, 10:56 AM	#2
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,456	Re: Will these work on our trucks? Call Summit, They'll be able to give you a definite answer.

02-15-2015, 12:40 PM	#3
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: Will these work on our trucks? not a great fit with the 5" backspace. that will tuck the wheels pretty far under and may contact the steering arms. thats made for the newer ifs trucks. ideally a 4" backspace but i dont know about the caps fitment. that wheel is basically having the wheel mount surface at the center of the wheel. test fit a different wheel and compare the changes in wheel width at the backside of the barrel to see if it will hit anything.

02-15-2015, 12:47 PM	#4
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 742	Re: Will these work on our trucks? That's what I was afraid of...I guess that I'll stay with the original plan, and have Stockton widen my OE's...

02-17-2015, 11:32 PM	#5
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Will these work on our trucks? Not so fast. I dont know what those ones are for sure, but several folks on this site have used the 10" wide wheel vintiques and they look amazing! I'll find some pic.s __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

02-17-2015, 11:35 PM	#6
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Will these work on our trucks? Here is one. [IMG][/IMG] __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

02-17-2015, 11:44 PM	#7
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Will these work on our trucks? Here is Belzeburb. http://67-72chevytrucks.com/vboard/s...&postcount=133 __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

02-17-2015, 11:55 PM	#8
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Will these work on our trucks? __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

02-17-2015, 11:58 PM	#9
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Will these work on our trucks? Definitely not too tucked in. __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

02-18-2015, 08:12 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Will these work on our trucks? I believe the 16.5 x 9.75s had about a 5" backspace. There were two offsets available The ones with less backspace were intended as rear wheels for C/20s and C/30s, prior to big Dooley pickups __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-18-2015, 10:30 AM	#11
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 742	Re: Will these work on our trucks? Excellent...your trucks look great!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.