MO Here's another factory truck tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70shortfleet** · 02-16-2015, 02:22 PM

Another beautiful automatic tilt column. It has been completely taken apart bead blasted and finished in powder coated semi-gloss black. It comes with a new wiring harness, upper and lower boots, N/S switch, tilt lever, turn signal lever, and a nos GM flasher knob. $575 shipped to the lower 48

67-72trucks · 02-16-2015, 02:23 PM

Wow is that nice!!!

**70shortfleet** · 02-16-2015, 02:39 PM

Quote:

Originally Posted by 67-72trucks

Wow is that nice!!!

Thanks Mike, you probably need one of this!

67-72trucks · 02-16-2015, 02:49 PM

Quote:

Originally Posted by 70shortfleet

Thanks Mike, you probably need one of this!

I'm stocked up for the next 4 truck restoration

74baggedbug · 02-16-2015, 05:10 PM

Why couldn't I have seen this a week ago??!!

richpcooley · 02-19-2015, 01:00 AM

Can You do custom colors or bare steel?

**70shortfleet** · 02-19-2015, 01:44 AM

Quote:

Originally Posted by richpcooley

Can You do custom colors or bare steel?

What exactly do you mean by custom colors? and bare steel?

68 Stepper · 02-19-2015, 01:53 AM

that is a good lookin column, wish I would have waited before doing my van tilt conversion!

C10_ustacould · 02-19-2015, 10:56 AM

How often do you have these available? I need one for my build, but not to that point yet.

**70shortfleet** · 02-19-2015, 01:15 PM

Quote:

Originally Posted by Bucks68

How often do you have these available? I need one for my build, but not to that point yet.

I have many of these, just let me know when you are ready, thanks Les

C10_ustacould · 02-19-2015, 01:31 PM

Will do thanks!

**70shortfleet** · 02-21-2015, 10:19 AM

ttt Someone needs this beautiful column! The pictures do not do it justice. This week end $525 plus $25 shipping to your door - $550 total

swamp rat · 02-21-2015, 04:27 PM

I'm interested, is the tilt mechanism tight? is it a complete rebuild? new bearings too? sorry i have never looked into column's yet..

**70shortfleet** · 02-21-2015, 05:02 PM

Quote:

Originally Posted by swamp rat

I'm interested, is the tilt mechanism tight? is it a complete rebuild? new bearings too? sorry i have never looked into column's yet..

Everything has been inspected while apart and if they need new bearing I put them in. This column had good bearing that have been cleaned and packed with new grease and the tilt mechanism is tight. It will last as long as you own your truck

thanks for your interest

swamp rat · 02-21-2015, 05:08 PM

PM Sent

67-72trucks · 02-21-2015, 05:14 PM

Quote:

Originally Posted by 70shortfleet

Everything has been inspected while apart and if they need new bearing I put them in. This column had good bearing that have been cleaned and packed with new grease and the tilt mechanism is tight. It will last as long as you own your truck

thanks for your interest

I highly recommend your columns to everyone! The quality is top notch show quality! You built the nicest crates for shipping the columns to me too

**70shortfleet** · 02-21-2015, 05:30 PM

Quote:

Originally Posted by 67-72trucks

I highly recommend your columns to everyone! The quality is top notch show quality! You built the nicest crates for shipping the columns to me too

Thanks Mike, you also build some top notch trucks!

**70shortfleet** · 02-21-2015, 05:52 PM

This tilt column is sold to (swamp rat) pending payment, thanks

**WIDESIDE72** · 02-22-2015, 02:16 PM

I have a nice 72 truck automatic tilt that needs the upper bearing replaced. Any tips or idea of price if you were to fix it for me? Also, do you work on later model columns? I have a tilt out of an 84 monte carlo that needs part of the linkage that actuated the ignition switch. It's pot metal and one day I went to start it and it wouldn't do anything. After a little investigating, the broken piece fell out in the floor. I swapped a column shift tilt I had from another car but want to go back to this one as it's a floor shift column.

**70shortfleet** · 02-22-2015, 08:02 PM

Quote:

Originally Posted by WIDESIDE72

I have a nice 72 truck automatic tilt that needs the upper bearing replaced. Any tips or idea of price if you were to fix it for me? Also, do you work on later model columns? I have a tilt out of an 84 monte carlo that needs part of the linkage that actuated the ignition switch. It's pot metal and one day I went to start it and it wouldn't do anything. After a little investigating, the broken piece fell out in the floor. I swapped a column shift tilt I had from another car but want to go back to this one as it's a floor shift column.

There are 2 sets of bearings in the upper part of the columna nd it might get pricey to replace a bad bearing if you have to ship it to me for that. You have to take the column apart to get to the upper 2 sets of bearings. I don't want do any work on other columns, just 67-72 automatic and floor shift tilts, regular automatic, 3 speed, floor shift columns.

**Razorbacker** · 02-22-2015, 10:49 PM

Quote:

Originally Posted by 67-72trucks

I highly recommend your columns to everyone! The quality is top notch show quality! You built the nicest crates for shipping the columns to me too

I'll second that. Les does some fantastic work.

Thanks,
Tony

33 coupe · 02-23-2015, 11:36 AM

Hey Les. Can you build me a tilt for a '67, painted med. blue and how much to 75077.
Thanks in advance.

**70shortfleet** · 02-23-2015, 02:44 PM

Quote:

Originally Posted by 33 coupe

Hey Les. Can you build me a tilt for a '67, painted med. blue and how much to 75077.
Thanks in advance.

I will PM you about the details, thanks

**70shortfleet** · 02-23-2015, 07:07 PM

This column has been sold and is paid in full by (swamp rat) thanks

javelinmania · 02-27-2015, 11:19 PM

Do you have any manual 3 on the tree rebuilt? What's the pricing on one?

02-16-2015, 02:22 PM	#1
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Here's another factory truck tilt Another beautiful automatic tilt column. It has been completely taken apart bead blasted and finished in powder coated semi-gloss black. It comes with a new wiring harness, upper and lower boots, N/S switch, tilt lever, turn signal lever, and a nos GM flasher knob. $575 shipped to the lower 48 Attached Images

02-16-2015, 02:23 PM	#2
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: Here's another factory truck tilt Wow is that nice!!!

02-16-2015, 05:10 PM	#5
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: Here's another factory truck tilt Why couldn't I have seen this a week ago??!!

02-19-2015, 01:00 AM	#6
richpcooley Registered User Join Date: Mar 2012 Location: Brooklyn, NY Posts: 3	Re: Here's another factory truck tilt Can You do custom colors or bare steel?

02-19-2015, 01:53 AM	#8
68 Stepper Registered User Join Date: Jul 2014 Location: Richland Washington Posts: 127	Re: Here's another factory truck tilt that is a good lookin column, wish I would have waited before doing my van tilt conversion!

02-19-2015, 10:56 AM	#9
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Here's another factory truck tilt How often do you have these available? I need one for my build, but not to that point yet. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-19-2015, 01:31 PM	#11
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Here's another factory truck tilt Will do thanks! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-21-2015, 10:19 AM	#12
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Re: Here's another factory truck tilt ttt Someone needs this beautiful column! The pictures do not do it justice. This week end $525 plus $25 shipping to your door - $550 total

02-21-2015, 04:27 PM	#13
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Here's another factory truck tilt I'm interested, is the tilt mechanism tight? is it a complete rebuild? new bearings too? sorry i have never looked into column's yet.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-21-2015, 05:08 PM	#15
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Here's another factory truck tilt PM Sent __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-21-2015, 05:52 PM	#18
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Re: Here's another factory truck tilt This tilt column is sold to (swamp rat) pending payment, thanks

02-22-2015, 02:16 PM	#19
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Here's another factory truck tilt I have a nice 72 truck automatic tilt that needs the upper bearing replaced. Any tips or idea of price if you were to fix it for me? Also, do you work on later model columns? I have a tilt out of an 84 monte carlo that needs part of the linkage that actuated the ignition switch. It's pot metal and one day I went to start it and it wouldn't do anything. After a little investigating, the broken piece fell out in the floor. I swapped a column shift tilt I had from another car but want to go back to this one as it's a floor shift column.

02-23-2015, 11:36 AM	#22
33 coupe Registered User Join Date: Aug 2010 Location: double oak, tx. Posts: 29	Re: Here's another factory truck tilt Hey Les. Can you build me a tilt for a '67, painted med. blue and how much to 75077. Thanks in advance.

02-23-2015, 07:07 PM	#24
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,240	Re: Here's another factory truck tilt This column has been sold and is paid in full by (swamp rat) thanks

02-27-2015, 11:19 PM	#25
javelinmania Registered User Join Date: Sep 2014 Location: Lexington, SC Posts: 127	Re: Here's another factory truck tilt Do you have any manual 3 on the tree rebuilt? What's the pricing on one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.