Throttle linkeage from firewall to carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My1967c10 · 02-18-2015, 10:11 PM

Does anyone know when you can get a replacement rod from the pivot at firewall to the carb? I am running an Endelbrock 1406 on high rise performer manifold. The rod was bent to accommodate an older two barrel setup from previous owner. Straightened it up a bit but am looking for ideas to get one that has not been bent.

**LockDoc** · 02-19-2015, 12:17 AM

Quote:

Originally Posted by My1967c10

Does anyone know when you can get a replacement rod from the pivot at firewall to the carb? I am running an Endelbrock 1406 on high rise performer manifold. The rod was bent to accommodate an older two barrel setup from previous owner. Straightened it up a bit but am looking for ideas to get one that has not been bent.

I don't know if they are reproduced or not. You might check on the parts for sale board on here and see if anyone has one for sale. You can't post a wanted to buy unless you are a Premium member but if you see one for sale you can buy it.

LockDoc

MAC71 · 02-19-2015, 02:02 AM

I have the same problem but I think I am going to just change the accelerator to the cable type from a 71 truck. Might work for you also.

jimmye · 02-19-2015, 06:36 PM

New to site, explain Premium member ?

**michael bustamante** · 02-19-2015, 06:50 PM

i think brother had em. if not i should have an extra in my stash,

SS Tim · 02-19-2015, 07:02 PM

Quote:

Originally Posted by jimmye

New to site, explain Premium member ?

A guest is someone who drops in and reads but cannot post.

A registered member has a name (in pink) and can post.

But a paid subscriber (name in blue) opens up privilages like posting classifeds like "for sale", wants or valuation of items.

http://67-72chevytrucks.com/vboard/payments.php

**LockDoc** · 02-19-2015, 07:05 PM

Quote:

Originally Posted by jimmye

New to site, explain Premium member ?

Go up to toward the top of this page and you will see a blue menu bar, click on the word "Subscribe" and it will list all of the different types of memberships. A Premium members board name is in Blue instead of Pink.

LockDoc

**michael bustamante** · 02-19-2015, 07:08 PM

and the yearly dues are well worth it in knowledge alone!!

My1967c10 · 02-19-2015, 10:17 PM

Quote:

Originally Posted by michael bustamante

i think brother had em. if not i should have an extra in my stash,

Thank you Michael, looked on brothers did not see one. Could u look in stash and post pic of what you have. Maybe can strike fair deal. Other option is to fab one.

Longhorn 70 · 02-20-2015, 09:44 AM

take it off.....
tap it straight with a rubber mallet on a piece of 2x4 and get it all cleaned up and happy.
Then build a nice throttle linkage bar for it from 2 Hein joints and a piece of polished aluminum rod from Ace Hardware.
You'll be done in no time for under $10
Have a functional smooth feeling throttle.

02-18-2015, 10:11 PM	#1
My1967c10 Registered User Join Date: Dec 2014 Location: Bristow, OK Posts: 7	Throttle linkeage from firewall to carb Does anyone know when you can get a replacement rod from the pivot at firewall to the carb? I am running an Endelbrock 1406 on high rise performer manifold. The rod was bent to accommodate an older two barrel setup from previous owner. Straightened it up a bit but am looking for ideas to get one that has not been bent.

02-19-2015, 02:02 AM	#3
MAC71 Registered User Join Date: Dec 2011 Location: UTAH Posts: 353	Re: Throttle linkeage from firewall to carb I have the same problem but I think I am going to just change the accelerator to the cable type from a 71 truck. Might work for you also. __________________ Mike 1971 C10 350 1969 C20 396 1979 Corvette L-82

02-19-2015, 06:36 PM	#4
jimmye Registered User Join Date: Dec 2014 Location: Supply,N.C. Posts: 59	Re: Throttle linkeage from firewall to carb New to site, explain Premium member ?

02-19-2015, 06:50 PM	#5
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Throttle linkeage from firewall to carb i think brother had em. if not i should have an extra in my stash, __________________ 1967custom

02-19-2015, 07:08 PM	#8
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Throttle linkeage from firewall to carb and the yearly dues are well worth it in knowledge alone!! __________________ 1967custom

02-20-2015, 09:44 AM	#10
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: Throttle linkeage from firewall to carb take it off..... tap it straight with a rubber mallet on a piece of 2x4 and get it all cleaned up and happy. Then build a nice throttle linkage bar for it from 2 Hein joints and a piece of polished aluminum rod from Ace Hardware. You'll be done in no time for under $10 Have a functional smooth feeling throttle. Attached Images __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.