AL CPP trailing arms and crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

supermototourer · 02-22-2015, 12:33 PM

I recently purchased the cpp trailing arms and rear crossmember. I put on the crossmember for about 500 miles and the trailing arms were put on and taken right back off. I have decided to go with the ride tech kit which includes these items. So I am planning to sell these parts. I paid about $700 for them, but I'll take $500 plus shipping for all three pieces. Im posting it on the board to see who might want the items. Local pickup in North Alabama would be preferred, but I will ship if you want, just might be a little costly. If any one is interested, please let me know. I still need to take off the crossmember, but the arms haven't been on the truck except to check fitment.

chevytruckluver · 02-22-2015, 12:42 PM

Any pics? do the trailing arms have any built in drop?

supermototourer · 02-22-2015, 12:46 PM

No. The arms don't have any drop. Here's the link to them. I bought the 6372TADLK on this page.

http://www.classicperform.com/NewPro...ionPackage.htm

low69chevy · 02-22-2015, 05:56 PM

Would you be willing to sell the arms by themselves and if so how much and could you get me a quote shipped to edinburg,tx 78541

**Todd68Chevy** · 02-22-2015, 06:06 PM

Happen to have the 6572DTBK 65-72 Deluxe Trac Bar that you are going to sell also?

supermototourer · 02-22-2015, 07:50 PM

Quote:

Originally Posted by low69chevy

Would you be willing to sell the arms by themselves and if so how much and could you get me a quote shipped to edinburg,tx 78541

The arms weigh 31lbs each. According to UPS it's about $70 for shipping. I'm willing to sell them for $375 + shipping estimate of $70.

supermototourer · 02-22-2015, 07:50 PM

Quote:

Originally Posted by Todd68Chevy

Happen to have the 6572DTBK 65-72 Deluxe Trac Bar that you are going to sell also?

Sorry, I don't have the tracbar.

supermototourer · 02-22-2015, 07:59 PM

Here are a few pics:

LDO · 02-22-2015, 09:01 PM

what was the problem? Didn't care for the ride or going a different route?

supermototourer · 02-22-2015, 09:05 PM

I indicated in the original post that I am going to buy the ride tech kit. I was originally going with Hotchkiss, which doesn't include those parts. But I decided I want to go with a coilovers setup.

LDO · 02-22-2015, 09:06 PM

Quote:

Originally Posted by supermototourer

I indicated in the original post that I am going to buy the ride tech kit. I was originally going with Hotchkiss, which doesn't include those parts. But I decided I want to go with a coilovers setup.

oh, sorry, fingers working faster than eyes/brain. I only asked because I was thinking of going this route for my 66.

supermototourer · 02-22-2015, 09:12 PM

Quote:

Originally Posted by LDO

oh, sorry, fingers working faster than eyes/brain. I only asked because I was thinking of going this route for my 66.

I think there is nothing wrong with this setup. The arms look nicer than I thought they would.

jus2qwk · 02-23-2015, 04:09 PM

PM sent

jus2qwk · 02-23-2015, 04:14 PM

I have the porterbuilt stage 2 for my rear and I just need to make sure the measurement from the top of the trailing arm where the rear end sits to the bottom where the u bolt tightens up are the same measurement as a stock arm so I can use the porterbuilt stuff that attaches to them

supermototourer · 02-25-2015, 05:40 PM

Sold!!!

jessemthompson · 03-10-2015, 07:00 PM

Did you sell the crossmember as well?

02-22-2015, 12:33 PM	#1
supermototourer Registered User Join Date: Jun 2014 Location: Huntsville, AL Posts: 16	CPP trailing arms and crossmember I recently purchased the cpp trailing arms and rear crossmember. I put on the crossmember for about 500 miles and the trailing arms were put on and taken right back off. I have decided to go with the ride tech kit which includes these items. So I am planning to sell these parts. I paid about $700 for them, but I'll take $500 plus shipping for all three pieces. Im posting it on the board to see who might want the items. Local pickup in North Alabama would be preferred, but I will ship if you want, just might be a little costly. If any one is interested, please let me know. I still need to take off the crossmember, but the arms haven't been on the truck except to check fitment.

02-22-2015, 12:42 PM	#2
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: CPP trailing arms and crossmember Any pics? do the trailing arms have any built in drop? __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

02-22-2015, 12:46 PM	#3
supermototourer Registered User Join Date: Jun 2014 Location: Huntsville, AL Posts: 16	Re: CPP trailing arms and crossmember No. The arms don't have any drop. Here's the link to them. I bought the 6372TADLK on this page. http://www.classicperform.com/NewPro...ionPackage.htm

02-22-2015, 05:56 PM	#4
low69chevy Registered User Join Date: Jul 2011 Location: edinburg tx Posts: 174	Re: CPP trailing arms and crossmember Would you be willing to sell the arms by themselves and if so how much and could you get me a quote shipped to edinburg,tx 78541

02-22-2015, 06:06 PM	#5
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: CPP trailing arms and crossmember Happen to have the 6572DTBK 65-72 Deluxe Trac Bar that you are going to sell also? __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-22-2015, 07:59 PM	#8
supermototourer Registered User Join Date: Jun 2014 Location: Huntsville, AL Posts: 16	Re: CPP trailing arms and crossmember Here are a few pics:

02-22-2015, 09:01 PM	#9
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,297	Re: CPP trailing arms and crossmember what was the problem? Didn't care for the ride or going a different route? __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

02-22-2015, 09:05 PM	#10
supermototourer Registered User Join Date: Jun 2014 Location: Huntsville, AL Posts: 16	Re: CPP trailing arms and crossmember I indicated in the original post that I am going to buy the ride tech kit. I was originally going with Hotchkiss, which doesn't include those parts. But I decided I want to go with a coilovers setup.

02-23-2015, 04:09 PM	#13
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: CPP trailing arms and crossmember PM sent __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

02-23-2015, 04:14 PM	#14
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: CPP trailing arms and crossmember I have the porterbuilt stage 2 for my rear and I just need to make sure the measurement from the top of the trailing arm where the rear end sits to the bottom where the u bolt tightens up are the same measurement as a stock arm so I can use the porterbuilt stuff that attaches to them __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

02-25-2015, 05:40 PM	#15
supermototourer Registered User Join Date: Jun 2014 Location: Huntsville, AL Posts: 16	Re: CPP trailing arms and crossmember Sold!!!

03-10-2015, 07:00 PM	#16
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: CPP trailing arms and crossmember Did you sell the crossmember as well?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.