CA Extra Parts, Longhorn Emblems, Guage Bezels, ect - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 02-23-2015, 01:59 PM

Here are some extra parts:

1. New Aftermarket chrome gauges bezel $55 shipped. SOLD
2. NORS new old reproduction stock (like original thick applique) wood grain bezel applique with 3M backing $80 shipped SOLD
3. New Longhorn Emblems $90 shipped These don the OEM GM part number (no mounting screws)
4. NOS Delco V8 Spark plug wires $40 shipped
5. Counterparts New Reproduction rear gravel bracket shield $28 shipped

6. Very Nice Tool box door, hinges, insert, and bed cutout. $450 shipped. SOLD

Pictures will post later today.
All shipped prices are for CONUS. Addition shipping may apply for other areas.

**michael bustamante** · 02-23-2015, 02:12 PM

interested in the gravel shields pending pics. can you post the length?

jmader · 02-23-2015, 02:44 PM

Interested in the plug wires pending pics

70LonghornCST · 02-23-2015, 04:09 PM

Pictures

70LonghornCST · 02-23-2015, 04:13 PM

Pictures 2

**michael bustamante** · 02-23-2015, 04:14 PM

are the gravel shields fleet or stepside? if steppers ill take them

70LonghornCST · 02-23-2015, 04:15 PM

Quote:

Originally Posted by michael bustamante

interested in the gravel shields pending pics. can you post the length?

I'll get some measurements tonight when I get home.

70LonghornCST · 02-23-2015, 04:18 PM

These are specified for a Fleet, and I'm not sure if these are the same length as a step.

**michael bustamante** · 02-23-2015, 04:46 PM

ok ill have to pass then, the steppers are shorter in width but thank you

Wyatts Classics · 02-23-2015, 05:11 PM

Interested in tool box door. We are restoring a 70 cst longhorn.

**Curtb1971** · 02-23-2015, 11:01 PM

Hey Richard,
Instrested in the wood grain decal. I'm wondering if it has any flaws in the woodgrain. Also being older do you think the addhesive is still good?
Thanks, Curt

70LonghornCST · 02-23-2015, 11:23 PM

Quote:

Originally Posted by michael bustamante

ok ill have to pass then, the steppers are shorter in width but thank you

No problem. Thanks for posting back.

Quote:

Originally Posted by Wyatts Classics

Interested in tool box door. We are restoring a 70 cst longhorn.

I'll get some pictures up. I forgot to snap some this morning.

Quote:

Originally Posted by Curtb1971

Hey Richard,
Instrested in the wood grain decal. I'm wondering if it has any flaws in the woodgrain. Also being older do you think the addhesive is still good?
Thanks, Curt

Hi Curt, the woodgrain is nice, with only slight imperfections due to the die cut process. My NOS bezel and woodgrain have similar flaws. Basically, near a couple of the lower holes, there are a couple of slight curves/creases...but are very slight. I peeled a section of the 3M tape off of the back and it's still very sticky.

**Curtb1971** · 02-24-2015, 12:42 AM

Cool, I'll take it. Thanks for the reply. I think I still have your PayPal so sending payment. Thanks

BigBlockNuts · 02-24-2015, 12:49 AM

How much 4 the wood grain bezel Application?

BigBlockNuts · 02-24-2015, 12:54 AM

How much 4 the bezel?

70LonghornCST · 02-24-2015, 12:59 AM

Quote:

Originally Posted by Curtb1971

Cool, I'll take it. Thanks for the reply. I think I still have your PayPal so sending payment. Thanks

Thanks. Paypal received. I'll get this out in tomorrow's mail.

Quote:

Originally Posted by BigBlockNuts

How much 4 the wood grain bezel Application?

Sorry, the woodgrain applique has sold. I do have an aftermarket woodgrain with Chrome bezel that I mocked up to my cluster. However, it is drilled for a Speed Warning cluster. It will be $65 shipped. Here is a picture of it installed on my cluster. (cluster not included

)

70LonghornCST · 02-24-2015, 01:12 AM

Here are pictures of the tool box setup. This will come with the following items:

Bedside opening
2 pieces of trim (driver quality or restore)
3 nice hinges
latch for lock
Tool box door
Tool box insert
misc. screws and bolts.

You will still need to locate the wire retainer that keeps the door stable when open.

A lock, but I believe it is the same as a door lock and retainer.

There are a few slight dings and minimal rust that will have to be taken care of. This is from a California truck and is in excellent shape compared to how these doors usually end up. The original hinges were on pretty tight and the screws got stripped when I tried to remove it. You will need to drill out the screws for the new hinges. I am keeping this as a set, so I won't spit it up.

Wyatts Classics · 02-24-2015, 07:32 PM

Quote:

Originally Posted by 70LonghornCST

Here are pictures of the tool box setup. This will come with the following items:

Bedside opening
2 pieces of trim (driver quality or restore)
3 nice hinges
latch for lock
Tool box door
Tool box insert
misc. screws and bolts.

You will still need to locate the wire retainer that keeps the door stable when open.

A lock, but I believe it is the same as a door lock and retainer.

There are a few slight dings and minimal rust that will have to be taken care of. This is from a California truck and is in excellent shape compared to how these doors usually end up. The original hinges were on pretty tight and the screws got stripped when I tried to remove it. You will need to drill out the screws for the new hinges. I am keeping this as a set, so I won't spit it up.

Please call me Richard. I cant seem to do anything on this site. 317-938-1997

70LonghornCST · 02-24-2015, 11:18 PM

Toolbox sold to Wyatts Classics pending payment.

**undertaker72** · 02-24-2015, 11:27 PM

Richard , ill take your wood grain panel for speed sensor , as I have a unit for it , 65.00 shipped , I think I still have your per info , thanks kevin

**undertaker72** · 02-25-2015, 07:41 AM

Richard , payment sent , thanks again kevin

70LonghornCST · 03-05-2015, 12:07 AM

Prices reduced on the following:

Longhorn emblems was $110, now they are $90 shipped
Gravel shields were $32, now they are $28 shipped
Plug wires were $50, now they are $40 shipped.

70LonghornCST · 03-07-2015, 04:18 PM

Ttt

engairuph · 03-07-2015, 05:07 PM

sorry

**Dieselwrencher** · 03-10-2015, 11:40 PM

PM sent on Longhorn emblems.

02-23-2015, 01:59 PM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Extra Parts, Longhorn Emblems, Guage Bezels, ect Here are some extra parts: 1. New Aftermarket chrome gauges bezel $55 shipped. SOLD 2. NORS new old reproduction stock (like original thick applique) wood grain bezel applique with 3M backing $80 shipped SOLD 3. New Longhorn Emblems $90 shipped These don the OEM GM part number (no mounting screws) 4. NOS Delco V8 Spark plug wires $40 shipped 5. Counterparts New Reproduction rear gravel bracket shield $28 shipped 6. Very Nice Tool box door, hinges, insert, and bed cutout. $450 shipped. SOLD Pictures will post later today. All shipped prices are for CONUS. Addition shipping may apply for other areas. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 03-05-2015 at 12:05 AM.

02-23-2015, 02:12 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect interested in the gravel shields pending pics. can you post the length? __________________ 1967custom

02-23-2015, 02:44 PM	#3
jmader Registered User Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Interested in the plug wires pending pics __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

02-23-2015, 04:09 PM	#4
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Pictures Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-23-2015, 04:13 PM	#5
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Pictures 2 Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-23-2015, 04:14 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect are the gravel shields fleet or stepside? if steppers ill take them __________________ 1967custom

02-23-2015, 04:18 PM	#8
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect These are specified for a Fleet, and I'm not sure if these are the same length as a step. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-23-2015, 04:46 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect ok ill have to pass then, the steppers are shorter in width but thank you __________________ 1967custom

02-23-2015, 05:11 PM	#10
Wyatts Classics Registered User Join Date: May 2014 Location: Noblesville, Indiana Posts: 27	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Interested in tool box door. We are restoring a 70 cst longhorn.

02-23-2015, 11:01 PM	#11
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Hey Richard, Instrested in the wood grain decal. I'm wondering if it has any flaws in the woodgrain. Also being older do you think the addhesive is still good? Thanks, Curt

02-24-2015, 12:42 AM	#13
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Cool, I'll take it. Thanks for the reply. I think I still have your PayPal so sending payment. Thanks

02-24-2015, 12:49 AM	#14
BigBlockNuts Registered User Join Date: Mar 2011 Location: Fullerton CA Posts: 1,176	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect How much 4 the wood grain bezel Application?

02-24-2015, 12:54 AM	#15
BigBlockNuts Registered User Join Date: Mar 2011 Location: Fullerton CA Posts: 1,176	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect How much 4 the bezel?

02-24-2015, 01:12 AM	#17
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Here are pictures of the tool box setup. This will come with the following items: Bedside opening 2 pieces of trim (driver quality or restore) 3 nice hinges latch for lock Tool box door Tool box insert misc. screws and bolts. You will still need to locate the wire retainer that keeps the door stable when open. A lock, but I believe it is the same as a door lock and retainer. There are a few slight dings and minimal rust that will have to be taken care of. This is from a California truck and is in excellent shape compared to how these doors usually end up. The original hinges were on pretty tight and the screws got stripped when I tried to remove it. You will need to drill out the screws for the new hinges. I am keeping this as a set, so I won't spit it up. Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-24-2015, 11:18 PM	#19
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Toolbox sold to Wyatts Classics pending payment. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal



Register or Log In To remove these advertisements.

02-24-2015, 11:27 PM	#20
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Richard , ill take your wood grain panel for speed sensor , as I have a unit for it , 65.00 shipped , I think I still have your per info , thanks kevin

02-25-2015, 07:41 AM	#21
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Richard , payment sent , thanks again kevin

03-05-2015, 12:07 AM	#22
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Prices reduced on the following: Longhorn emblems was $110, now they are $90 shipped Gravel shields were $32, now they are $28 shipped Plug wires were $50, now they are $40 shipped. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-07-2015, 04:18 PM	#23
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect Ttt __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-07-2015, 05:07 PM	#24
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect sorry __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

03-10-2015, 11:40 PM	#25
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Extra Parts, Longhorn Emblems, Guage Bezels, ect PM sent on Longhorn emblems. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.