CL Denver find, not mine, 64 short box K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

earl84 · 03-21-2015, 07:15 PM

Don't see these very often. Looks to be in decent shape and comes with extra parts. If I was in the market for this, I'd be all over this.
http://denver.craigslist.org/cto/4942292615.html

'63GENIII · 03-21-2015, 08:40 PM

Love the slider and '63 grill!

TJ's Chevy · 03-22-2015, 11:14 AM

Nice truck!

Mikes66ChevyC10 · 03-22-2015, 12:45 PM

Looks nice!

1963c-10 · 03-23-2015, 10:11 AM

Nice find!!

Texoradan · 03-30-2015, 07:40 PM

This will be my first posting on these boards, and it's all because of this here truck. I've been reading the forums on the 60-66 models night and day for the past 3 or 4 days

I've been wanting to get an older model pickup and restore it WHILE I use it as my daily driver. This turned out to be the first truck that really struck my fancy. I've got a few more photos I took with my iPhone:

Driver Side View:

Rear View:

Interior Shot:

Cancerous Area Passenger Side (Similar driver side):

Rear Differential:

Underside view of Rocker Panels:

I got a few more photos on my iPhone but they didn't turn out so well.

This will be my first vehicle to do major work on. I know she'll be a lot of work, but I wanted to see if there's anything you seasoned vets are seeing that I'm NOT seeing that would be cause for concern. I cold-cranked the 283 no problem, drove her around the block and got up into 2nd gear, but didn't take her much further than that. I shifted through the gears without going into 3 and 4, but 1, 2, and R seemed fine. The 35s will need to replaced immediately. He also has two better condition doors with all the hardware/paneling (a little corner rust) and a new hood.

Also, he's asking $5400, but I'm not sure how close to that I want to come. I don't really know how to determine a fair price other than by what I see come across craigslist. What do you guys think about it?

Any help would be appreciated!

jdl71 · 03-30-2015, 08:57 PM

Verify it is a factory 4x4 by the VIN. Should start with 4K14. The t-case shifter in the pics leads me to believe it is on a 64 4x4 chassis, but I'd be sure the body matched before I pulled the trigger. Other than that I think he's a bit high. I'd say around 3500-4k would be more realistic, but they also don't come up for sale nearly as often as the 2wd trucks.

Texoradan · 03-30-2015, 09:01 PM

Thanks for the response, jdl71.

I did check the VIN, and it did start with the 4K14. This one was built in CA.

I just offered him $3600 prior to seeing this, so I'm glad I was estimating it in the same ball park.

jdl71 · 03-30-2015, 09:05 PM

Sounds like you're on the right track. Good luck and keep us posted!

earl84 · 03-31-2015, 12:41 PM

So happy that I found this and someone here bought it, or might buy it. Good luck!

03-21-2015, 07:15 PM	#1
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	CL Denver find, not mine, 64 short box K10 Don't see these very often. Looks to be in decent shape and comes with extra parts. If I was in the market for this, I'd be all over this. http://denver.craigslist.org/cto/4942292615.html

03-21-2015, 08:40 PM	#2
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: CL Denver find, not mine, 64 short box K10 Love the slider and '63 grill! __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

03-22-2015, 11:14 AM	#3
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: CL Denver find, not mine, 64 short box K10 Nice truck! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

03-22-2015, 12:45 PM	#4
Mikes66ChevyC10 Registered User Join Date: Feb 2014 Location: Forest City PA Posts: 378	Re: CL Denver find, not mine, 64 short box K10 Looks nice! __________________ 1966 C10 Stepside swb http://67-72chevytrucks.com/vboard/s...d.php?t=617778

03-23-2015, 10:11 AM	#5
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: CL Denver find, not mine, 64 short box K10 Nice find!! __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-30-2015, 07:40 PM	#6
Texoradan Registered User Join Date: Mar 2015 Location: Denver, CO Posts: 2	Re: CL Denver find, not mine, 64 short box K10 This will be my first posting on these boards, and it's all because of this here truck. I've been reading the forums on the 60-66 models night and day for the past 3 or 4 days I've been wanting to get an older model pickup and restore it WHILE I use it as my daily driver. This turned out to be the first truck that really struck my fancy. I've got a few more photos I took with my iPhone: Driver Side View: Rear View: Interior Shot: Cancerous Area Passenger Side (Similar driver side): Rear Differential: Underside view of Rocker Panels: I got a few more photos on my iPhone but they didn't turn out so well. This will be my first vehicle to do major work on. I know she'll be a lot of work, but I wanted to see if there's anything you seasoned vets are seeing that I'm NOT seeing that would be cause for concern. I cold-cranked the 283 no problem, drove her around the block and got up into 2nd gear, but didn't take her much further than that. I shifted through the gears without going into 3 and 4, but 1, 2, and R seemed fine. The 35s will need to replaced immediately. He also has two better condition doors with all the hardware/paneling (a little corner rust) and a new hood. Also, he's asking $5400, but I'm not sure how close to that I want to come. I don't really know how to determine a fair price other than by what I see come across craigslist. What do you guys think about it? Any help would be appreciated!

03-30-2015, 08:57 PM	#7
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: CL Denver find, not mine, 64 short box K10 Verify it is a factory 4x4 by the VIN. Should start with 4K14. The t-case shifter in the pics leads me to believe it is on a 64 4x4 chassis, but I'd be sure the body matched before I pulled the trigger. Other than that I think he's a bit high. I'd say around 3500-4k would be more realistic, but they also don't come up for sale nearly as often as the 2wd trucks. __________________ Psalm 23 64 C10 66 K20

03-30-2015, 09:01 PM	#8
Texoradan Registered User Join Date: Mar 2015 Location: Denver, CO Posts: 2	Re: CL Denver find, not mine, 64 short box K10 Thanks for the response, jdl71. I did check the VIN, and it did start with the 4K14. This one was built in CA. I just offered him $3600 prior to seeing this, so I'm glad I was estimating it in the same ball park.

03-30-2015, 09:05 PM	#9
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: CL Denver find, not mine, 64 short box K10 Sounds like you're on the right track. Good luck and keep us posted! __________________ Psalm 23 64 C10 66 K20

03-31-2015, 12:41 PM	#10
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Re: CL Denver find, not mine, 64 short box K10 So happy that I found this and someone here bought it, or might buy it. Good luck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.