03-23-2015, 08:13 PM | #1 |
Registered User
Join Date: Mar 2005
Location: Bartlett, TN (near Memphis)
Posts: 202
|
Patina...
I am getting a little whizzed off about all the "patina" lovers on this board. Before I started restoring my orange 1970 some 15 year ago, she was chock full of patina. There wasn't a place on her where the paint wasn't thin. The cab had running lights added on top when I bought her and I guess they must have leaked because the inside of the roof had tons of rust around the windshield. If saw the bump in the road ahead, I soon conditioned myself to keep my eyes almost closed so that rust wouldn't get in my eyes. I bought her to pull a bass boat and she did just fine when she was a rust bucket. If I had known that patina would soon be so much in style, I would've tried to preserve her in that state rather then replace the cab and doors and then spend a jillion dollars to strip her down to bare metal, weld in patch panels, prime/block and repaint her. I finally got her done but now I can't haul anything in her for fear of scratching her precious paint job. I would never dare to leave her parked at a boat ramp for fear that someone would steal her. I sure do miss my old orange "patina" truck.
|
03-23-2015, 08:26 PM | #2 |
Registered User
Join Date: Jul 2008
Location: Richmond, VA
Posts: 56
|
Re: Patina...
Yeah mine started out with "patina", then I painted it. Sometimes I miss the "patina" look as well. It has a couple of scratches after 6yrs and with the "patina" thatv would be just more character!
__________________
1990 S10 Reg. cab 2wd 2.5/ 700r4, lowered, soon to be a TBI 350/ 700r4 1993 2500 Reg. cab 4wd 6.5 turbo diesel/ 5spd, bigger turbo, Bull Moose pump, cold air intake, and a few other mods 1969 C10 Reg. cab 2wd 305/350, RHS heads, Voodoo Cam, Gilmer drive, 2400 stall, and lots of other goodies! |
03-23-2015, 08:43 PM | #3 |
Registered User
Join Date: Dec 2014
Location: Coal City, IL
Posts: 695
|
Re: Patina...
Don't confuse patina with a rusted out truck. They're very different. A perfect patina truck is just sun burnt, faded, and worn through paint. No flaking rust or gaping rust through. It is very rare and hard to find in most states.
__________________
Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker |
03-23-2015, 08:58 PM | #4 |
Registered User
Join Date: Dec 2014
Location: Coal City, IL
Posts: 695
|
Re: Patina...
Patina
__________________
Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker |
03-23-2015, 08:59 PM | #5 |
Registered User
Join Date: Dec 2014
Location: Coal City, IL
Posts: 695
|
Re: Patina...
Rusted out
__________________
Tony Nicholas @ Midwest Metal Masters 1953 Chevy 3100 392 Hemi w/727 & 9” Ford 1985 Chevy C/10 6.0L 4L80 373 locker |
03-23-2015, 09:27 PM | #6 |
Registered User
Join Date: Mar 2005
Location: Bartlett, TN (near Memphis)
Posts: 202
|
Re: Patina...
|
03-23-2015, 09:32 PM | #7 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,728
|
Re: Patina...
I'm kinda' an old fart too. And LOVE driving my lowered patina truck...
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
03-23-2015, 10:42 PM | #8 |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
|
Re: Patina...
I know exactly what you mean.
I restored a 51 and a 55 second series truck years ago and they quit being a truck as soon as the slick paint and polished bed wood went in. Sold the 55 and said "never again would I ever do another truck". Well here I am years later in the trucks again. Hopefully wiser and not just older. I do like the patina trucks probably a little more than the slick painted ones if only because I know most all the "done" or "restored" trucks are single seat cars that can't haul nuthin. I am hoping that maybe I can possibly find a middle ground whereas I can put a little cheap paint on my truck but forget anything shiny or really top notch especially in the bed. Gotta be able to haul at least an ice chest and some lawn chairs. "Gotta drive em" Of course patina and slammed trucks are the rage or "flavor of the month" so carry on. I kinda dig em all, but like the trucks that still function as a truck once in a while.
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
03-24-2015, 12:43 AM | #9 |
Senior Member
Join Date: Jan 2007
Location: Turlock, CA
Posts: 8,801
|
Re: Patina...
as stated above, the desire of patina is finding a true survivor truck, not a rust pile.
it's interesting how many threads people start either bashing or questioning "patina". there are so many different options to love or hate with these trucks (long vs short, c vs k, bagged, modified, original resto, etc). but there seems to be so much concern about patina.
__________________
Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Thank you all so far you are angels!! Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD |
03-24-2015, 08:47 AM | #10 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Patina...
It's on bags, raises up to a normal driving height
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
03-24-2015, 09:41 AM | #11 | |
Registered User
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,189
|
Re: Patina...
Quote:
|
|
03-24-2015, 09:45 AM | #12 |
Registered User
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: Patina...
I don't mind it patina'd or shiny. But personally I like patina, shows the history. Only original once.
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son |
03-24-2015, 09:52 AM | #13 |
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,234
|
Re: Patina...
whyizit you only hear guys with shiney trucks bashing patina'd trucks but you never hear guys with patina'd trucks bashing shiney trucks?
it's almost like it's a self-esteem thing. one group is looking for some type of "approval" from others. while the other group could give a $hit what others think. <shrug> |
03-24-2015, 10:11 AM | #14 |
Registered User
Join Date: Jun 2011
Location: Osceola, Ia
Posts: 2,017
|
Re: Patina...
Not true..
I like em all. And i haul stuff in my shiny truck! Wood bed and all. I look at mine as an new old truck. If it needs sprayed again 15 yrs from now, so be it. Mine was WAY past the patina stage, so had to fix it. But wont let that keep me from using and enjoying it. Would gladly have had that origanal look though...
__________________
Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039 |
03-24-2015, 10:34 AM | #15 |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
|
Re: Patina...
I personally think a lot of the "dislike" thrown towards PATINA trucks or cars is based either partially or completely on the idea that "I spent this much money painting my truck and your patina truck draws all the crowds at the shows and on the message boards". To some degree it's true.
Most old trucks have multi colors or rust/dents that must be fixed and then new paint shot. Lots of folk will walk by and say "oh nice, you got an orange truck" and keep walking. Let one of these authentic survivor patina'd slammed on the ground bad boys pull in the lot and it will draw a crowd like flies on sh*t. Let me be the first to admit, I do the same. I like a good looking restored truck but am really digging the true survivors slammed. That's not to say I will build one. Just like em a lot.
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
03-24-2015, 10:45 AM | #16 |
Registered User
Join Date: Jul 2008
Location: Eastern Oregon
Posts: 2,393
|
Re: Patina...
This is real patina ! She sat in one spot untouched across the street from the dealership for 22 years ! No rust thru, just on top surface. People love running their hands over the hood and fenders.
__________________
71 C-20 07 Magnum RT AWD |
03-24-2015, 10:56 AM | #17 |
Registered User
Join Date: Dec 2012
Location: Rogersville, TN
Posts: 10
|
Re: Patina...
|
03-24-2015, 11:08 AM | #18 |
Registered User
Join Date: Sep 2013
Location: Evansville, IN
Posts: 1,774
|
Re: Patina...
I really like the clean patina trucks. If I had to do it all over again, I would have taken more time, spent more money, and bought a truck out west.
I would love to leave my truck in its current body state but its got way too much rot. I have people tell me to just clear my truck and leave it, but to me its senseless to do that to a truck with holes in the rockers and fenders. My only issue with doing all the bodywork and paint is I will be afraid to drive it which is the whole reason I sold my Mustang for a C10. Hopefully that won't happen.
__________________
Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold |
03-24-2015, 11:09 AM | #19 |
Senior Member
Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
|
Re: Patina...
I didn't really get the "Patina" craze either.
But then, I was in the Rowlett Texas area in Sept 2012 visiting friends at the Sachse Rod Shop. I contacted n2billet and stopped over to see what this "Patina" thing looked like in person. He had 2 trucks there. Possibly Stella Mae and Hazel, I don't remember for sure. I am not sure if it was the Patina or the quality and vision of the work he does or possibly the combination of it all. But I changed my mind that day. If I could find a worthy starting point, I would build a "Patina Truck" today.
__________________
My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 03-25-2015 at 01:30 PM. |
03-24-2015, 11:29 AM | #20 |
Registered User
Join Date: Jun 2011
Location: Osceola, Ia
Posts: 2,017
|
Re: Patina...
Its easy, once you get a few rock chips, the pressure is off. Let er rip!!
__________________
Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039 |
03-24-2015, 11:46 AM | #21 |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: Patina...
I don't really like patina. My truck was repainted once (badly) many years before I got it. So I don't have patina. But I can't make myself spend what it takes to get a nice paint job, so I slapped a logo on the door and call it a shop truck.
Kinda in between......LOL. But its ugly, fun, and I can drive it and not worry about it.
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
03-24-2015, 11:58 AM | #22 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,071
|
Re: Patina...
Quote:
And... If you use it like a truck & don't 'protect' it from EVERYTHING (sun/UV damage, rain, snow, parking-lot door dings, scratches, bed floor scrapes, etc...), in 15-20 years it should have 2nd GEN patina. Shiny or not, just get them out & enjoy them before your time, or theirs, expires.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
03-24-2015, 01:04 PM | #23 | |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
|
Re: Patina...
Quote:
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
|
03-24-2015, 01:09 PM | #24 | |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
|
Re: Patina...
Quote:
Funny thing is when I was a kid in the 60's this was a sign of poverty. My dad bought a station wagon that looked like this. About 2 weeks later he painted it in the driveway "WITH A BRUSH" dark garbage can green. He was soo proud of "how much nicer it looked without all that rust showing". Drove it for years.
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
|
03-24-2015, 01:31 PM | #25 | |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Patina...
Quote:
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
Bookmarks |
|
|