CA Hydraulic bell housing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**396ci** · 03-23-2015, 10:41 PM

good used hydraulic bell housing from a 1990 1 ton (square body crew cab) 4spd truck. transmission was a sm465 granny low. will get some pics up in the next couple of days. $149 shipped conus. thanks for looking!

**396ci** · 03-24-2015, 09:53 PM

pics added. includes the dust cover but there is a break on the starter loop. through out worked without issues. will also entertain offers if anyone is interested. thanks.

**396ci** · 04-07-2015, 04:13 PM

ttt

Chevy3+3 · 04-07-2015, 11:19 PM

Am I seeing this correctly? Was the slave cylinder on the driver side of the bell housing? I thought they were all on the passenger side on squares? I haven't been around to many manual tranny trucks. I was planning on buying an Advanced adapters bell housing to swap in my NV4500 but I don't see why this bell housing wouldn't work.

Chevy3+3 · 04-07-2015, 11:41 PM

I think I recall now that the Sm465 has different bell housing bolt pattern than the NV4500

**1774btcrew** · 04-07-2015, 11:57 PM

I don't know on the NV4500 transmissions but do know that all SM465 transmissions have the slave cylinder on the driver's side of the bell housing.

**396ci** · 04-08-2015, 12:37 AM

Quote:

Originally Posted by Chevy3+3

I think I recall now that the Sm465 has different bell housing bolt pattern than the NV4500

i can take some measurements if you need them, just let me know. thanks

**argonaut** · 04-10-2015, 07:43 PM

I'm in Modesto and can pick it up right now if you'll do $100 cash.

**396ci** · 04-10-2015, 08:08 PM

Quote:

Originally Posted by argonaut

I'm in Modesto and can pick it up right now if you'll do $100 cash.

i can do that. will pm you my number

**396ci** · 04-10-2015, 09:23 PM

sold to argonaut - thanks jason!

03-23-2015, 10:41 PM	#1
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 805	Hydraulic bell housing good used hydraulic bell housing from a 1990 1 ton (square body crew cab) 4spd truck. transmission was a sm465 granny low. will get some pics up in the next couple of days. $149 shipped conus. thanks for looking! __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

03-24-2015, 09:53 PM	#2
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 805	Re: Hydraulic bell housing pics added. includes the dust cover but there is a break on the starter loop. through out worked without issues. will also entertain offers if anyone is interested. thanks. Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

04-07-2015, 04:13 PM	#3
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 805	Re: Hydraulic bell housing ttt __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

04-07-2015, 11:19 PM	#4
Chevy3+3 Registered User Join Date: Oct 2013 Location: Winfield KS Posts: 489	Re: Hydraulic bell housing Am I seeing this correctly? Was the slave cylinder on the driver side of the bell housing? I thought they were all on the passenger side on squares? I haven't been around to many manual tranny trucks. I was planning on buying an Advanced adapters bell housing to swap in my NV4500 but I don't see why this bell housing wouldn't work. __________________ 88' Chevy V30 3+3 4x4 Dually 454 TBI/NV4500/NP205

04-07-2015, 11:41 PM	#5
Chevy3+3 Registered User Join Date: Oct 2013 Location: Winfield KS Posts: 489	Re: Hydraulic bell housing I think I recall now that the Sm465 has different bell housing bolt pattern than the NV4500 __________________ 88' Chevy V30 3+3 4x4 Dually 454 TBI/NV4500/NP205

04-07-2015, 11:57 PM	#6
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Hydraulic bell housing I don't know on the NV4500 transmissions but do know that all SM465 transmissions have the slave cylinder on the driver's side of the bell housing. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-10-2015, 07:43 PM	#8
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Hydraulic bell housing I'm in Modesto and can pick it up right now if you'll do $100 cash. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

04-10-2015, 09:23 PM	#10
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 805	Re: Hydraulic bell housing sold to argonaut - thanks jason! __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.