1967 Bone Stock Underhood Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smerkey · 04-01-2015, 11:24 AM

I am restoring a 1967, 250ci, 4 speed, C10 into the bone-stock truck like I had in high school. No modifications, base model, painted bumpers, radio delete, lighter delete, the whole (cheap) nine yards.

I am very curious about colors, finishes, decal placement, wire routing, firewall inspection marks, etc., etc.

If you have any correct stock photos specific to 1967 showing anything mentioned or anything else you think might be helpful I'd be appreciative. Thanks in advance!

Steve

**michael bustamante** · 04-01-2015, 11:31 AM

i have dash pics if you need those.
i also have a bone stock 67 but im adding disk and power brakes p steer etc. i dont know of any decals on a 67 250 other than the one on the air cleaner depending on which plant it came from, same with the marks. it depends on where it was assembled. the firewall will be the same color as the cab and the inner fenders and rad support should be a flat black. i can also send pics of my firewall if you need them

**67 cst swb** · 04-01-2015, 11:32 AM

no help from me.
But... Welcome to the board!

smerkey · 04-01-2015, 12:08 PM

Thanks for the welcome! Just interested in all things stock I guess. I'm not too worried about correctness for the VIN or specific to the truck, just a representation of what stock looked like.

Just as a point of reference, the last restoration I did was on a 1929 Model A. There are publications that specify every nut and bolt's finish, the placement of every single wire, the variations in build from month to month of production...EVERYTHING. This project has me guessing as I am sure there were many "right" ways that things were done and they were not all documented as they were in the case of a simple vehicle like the Model A.

Attached are pics of the high-school ride (Old Blue) and the one I'm working on to make it into a copy of Old Blue.

**michael bustamante** · 04-01-2015, 02:06 PM

do you still have your radio delete and the cig lighter delete plug? and ashtray? are you going to paint it blue or keep it red?

**67 cst swb** · 04-01-2015, 02:09 PM

OH My... a red 67 small window.
I vote to keep it red !!!

CST10 · 04-01-2015, 06:16 PM

Go look at my photo albums. I have plenty of pictures of my 68 stepper. It's all original 22,000 mile truck. Original paint, engine and interior.

Sklptrljay · 04-01-2015, 06:22 PM

There was a guy on here with a thread the other day that showed his Grandpas 67 that has 32 miles. Yeah, 32!

If any truck could be the Bible about how stock should look, it would be his.

Here's the link. http://67-72chevytrucks.com/vboard/s...d.php?t=665004

smerkey · 04-03-2015, 12:40 AM

Michael: No, I do not. I wish I did. I am looking for those items as that is the was it was when I was a kid.

67 cst swb: I think the mind is made up to go blue. The color is really more an orange than red in real life. Trust me, I have been toying with the idea...

CST10: I'll check out your album. Thanks!!

Sklptrljay: I did see that thread. Awesome truck. What a prize to own.

**Cash3481** · 04-03-2015, 06:55 AM

I can get you a few pics of this 67 vermillion truck I brought home!
Its pretty unmolested!

smerkey · 04-03-2015, 09:36 AM

Quote:

Originally Posted by Cash3481

I can get you a few pics of this 67 vermillion truck I brought home!
Its pretty unmolested!

That's a sweet ride. Looks pretty familiar. Anything you post would be appreciated...always love photos of the same year as the one you've got!

**too much stuff** · 04-03-2015, 09:27 PM

My 67

factorystock · 04-04-2015, 11:41 AM

Here is a little something, a factory photo when new. I've said this before, IMO, I believe the original engine color was more of a red-orange, not the Chevy orange color which is so common today. Time, weather and engine heat have away of toning down colors, especially under the hood. Note, engine paint still has not burned off manifold. Inner fenders were semi-gloss, while accessories such as air cleaner and oil cap were gloss black.

smerkey · 04-05-2015, 10:13 AM

Quote:

Originally Posted by factorystock

Here is a little something, a factory photo when new. I've said this before, IMO, I believe the original engine color was more of a red-orange, not the Chevy orange color which is so common today. Time, weather and engine heat have away of toning down colors, especially under the hood. Note, engine paint still has not burned off manifold. Inner fenders were semi-gloss, while accessories such as air cleaner and oil cap were gloss black.

Man oh man, that's the stuff right there! Would love to see a bunch of those from different areas of the truck.

Thanks for all the input guys!

Redline novdog · 04-05-2015, 10:24 AM

Name: HPIM1726.jpg
Views: 376
Size: 72.6 KB

My '67 with 327 .Pretty rough shape,mostly original

Dirt's72 · 04-05-2015, 10:55 AM

The "High School Truck". Had to drop a pic of mine looks just like your replacement. I miss this ole dog.

Sorry no engine pics. I just remember there was lots of extra space around my 250.

Lees68GMC · 04-05-2015, 11:29 AM

I know mines a 68 but I thought you'd appreciate what it looked like anyway. Notice the hood prop since the springs were gone.

Also "Dirt" you should let the East Coast guys in here know, especially the New York City guys, that's NOT a Rat you caught livin' in your truck.

04-01-2015, 11:24 AM	#1
smerkey Registered User Join Date: Jun 2014 Location: Esko Posts: 23	1967 Bone Stock Underhood Pics I am restoring a 1967, 250ci, 4 speed, C10 into the bone-stock truck like I had in high school. No modifications, base model, painted bumpers, radio delete, lighter delete, the whole (cheap) nine yards. I am very curious about colors, finishes, decal placement, wire routing, firewall inspection marks, etc., etc. If you have any correct stock photos specific to 1967 showing anything mentioned or anything else you think might be helpful I'd be appreciative. Thanks in advance! Steve

04-01-2015, 11:31 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 1967 Bone Stock Underhood Pics i have dash pics if you need those. i also have a bone stock 67 but im adding disk and power brakes p steer etc. i dont know of any decals on a 67 250 other than the one on the air cleaner depending on which plant it came from, same with the marks. it depends on where it was assembled. the firewall will be the same color as the cab and the inner fenders and rad support should be a flat black. i can also send pics of my firewall if you need them __________________ 1967custom

04-01-2015, 11:32 AM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 Bone Stock Underhood Pics no help from me. But... Welcome to the board! __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

04-01-2015, 12:08 PM	#4
smerkey Registered User Join Date: Jun 2014 Location: Esko Posts: 23	Re: 1967 Bone Stock Underhood Pics Thanks for the welcome! Just interested in all things stock I guess. I'm not too worried about correctness for the VIN or specific to the truck, just a representation of what stock looked like. Just as a point of reference, the last restoration I did was on a 1929 Model A. There are publications that specify every nut and bolt's finish, the placement of every single wire, the variations in build from month to month of production...EVERYTHING. This project has me guessing as I am sure there were many "right" ways that things were done and they were not all documented as they were in the case of a simple vehicle like the Model A. Attached are pics of the high-school ride (Old Blue) and the one I'm working on to make it into a copy of Old Blue. Attached Images

04-01-2015, 02:06 PM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 1967 Bone Stock Underhood Pics do you still have your radio delete and the cig lighter delete plug? and ashtray? are you going to paint it blue or keep it red? __________________ 1967custom

04-01-2015, 02:09 PM	#6
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 1967 Bone Stock Underhood Pics OH My... a red 67 small window. I vote to keep it red !!! __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

04-01-2015, 06:16 PM	#7
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 1967 Bone Stock Underhood Pics Go look at my photo albums. I have plenty of pictures of my 68 stepper. It's all original 22,000 mile truck. Original paint, engine and interior. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-01-2015, 06:22 PM	#8
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: 1967 Bone Stock Underhood Pics There was a guy on here with a thread the other day that showed his Grandpas 67 that has 32 miles. Yeah, 32! If any truck could be the Bible about how stock should look, it would be his. Here's the link. http://67-72chevytrucks.com/vboard/s...d.php?t=665004 __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy

04-03-2015, 12:40 AM	#9
smerkey Registered User Join Date: Jun 2014 Location: Esko Posts: 23	Re: 1967 Bone Stock Underhood Pics Michael: No, I do not. I wish I did. I am looking for those items as that is the was it was when I was a kid. 67 cst swb: I think the mind is made up to go blue. The color is really more an orange than red in real life. Trust me, I have been toying with the idea... CST10: I'll check out your album. Thanks!! Sklptrljay: I did see that thread. Awesome truck. What a prize to own.

04-03-2015, 06:55 AM	#10
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 1967 Bone Stock Underhood Pics I can get you a few pics of this 67 vermillion truck I brought home! Its pretty unmolested! Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

04-03-2015, 09:27 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: 1967 Bone Stock Underhood Pics My 67 Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-04-2015, 11:41 AM	#13
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: 1967 Bone Stock Underhood Pics Here is a little something, a factory photo when new. I've said this before, IMO, I believe the original engine color was more of a red-orange, not the Chevy orange color which is so common today. Time, weather and engine heat have away of toning down colors, especially under the hood. Note, engine paint still has not burned off manifold. Inner fenders were semi-gloss, while accessories such as air cleaner and oil cap were gloss black. Attached Images

04-05-2015, 10:24 AM	#15
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: 1967 Bone Stock Underhood Pics My '67 with 327 .Pretty rough shape,mostly original __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

04-05-2015, 10:55 AM	#16
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: 1967 Bone Stock Underhood Pics The "High School Truck". Had to drop a pic of mine looks just like your replacement. I miss this ole dog. Sorry no engine pics. I just remember there was lots of extra space around my 250.

04-05-2015, 11:29 AM	#17
Lees68GMC Registered User Join Date: Jul 2013 Location: Prescott Arizona Posts: 343	Re: 1967 Bone Stock Underhood Pics I know mines a 68 but I thought you'd appreciate what it looked like anyway. Notice the hood prop since the springs were gone. Also "Dirt" you should let the East Coast guys in here know, especially the New York City guys, that's NOT a Rat you caught livin' in your truck. Attached Images __________________ 68 GMC SWB Vortec 5.3 98 Chevy Blazer ZR2 94 Mazda Miata, LS2 6 speed, sold "No matter what happens, nobody gets out alive" Last edited by Lees68GMC; 04-05-2015 at 11:39 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.