1963 C10 Build Starting...... "Francis" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FatFenderGarage · 04-13-2015, 01:07 PM

So we are starting a new build for our shop. We picked up a 1963 C-10 that has virtually no rust, and from an original owner. We waited for the right truck and were rewarded for our patience. The build will consist of a ground up restoration. All Porterbuilt bagged suspension. The truck will be powered by an LS3 twin turbo with an automatic suspension. The original paint will be left alone, we will wet sand all the oxidation off, but the chassis, Interior and engine bay will be completed thoroughly. The idea is to build a nice driver that isn't so over the top that people can't feel its attainable or affordable, but also fast. So stay tuned for the build. This will be well documented. Free T-Shirt if you can tell me where this truck picture was taken.... But you may need to be from AZ.

jimmyjammoto · 04-13-2015, 01:10 PM

Tombstone? Nice truck! Ballpark figure of what something like this went for..

FatFenderGarage · 04-13-2015, 01:28 PM

Quote:

Originally Posted by jimmyjammoto

Tombstone? Nice truck! Ballpark figure of what something like this went for..

Not Tombstone....

Lugnutz65 · 04-13-2015, 02:06 PM

Nogales, AZ? Maybe? Super nice truck BTW. I like the plan you have but the power would be too much for me! Hah!

FatFenderGarage · 04-13-2015, 02:09 PM

Quote:

Originally Posted by Lugnutz65

Nogales, AZ? Maybe? Super nice truck BTW. I like the plan you have but the power would be too much for me! Hah!

Not Nogales... We do plan to keep the turbos on the smaller side so that we can keep it under control.. But who doesn't want to be able to just rip it whenever you can..

**Classic v6 GMC's** · 04-13-2015, 08:48 PM

Prescott? Nice truck, hard to find a short bed fleet.

04-13-2015, 01:07 PM	#1
FatFenderGarage Registered User Join Date: May 2013 Location: Gilbert, AZ Posts: 21	1963 C10 Build Starting...... "Francis" So we are starting a new build for our shop. We picked up a 1963 C-10 that has virtually no rust, and from an original owner. We waited for the right truck and were rewarded for our patience. The build will consist of a ground up restoration. All Porterbuilt bagged suspension. The truck will be powered by an LS3 twin turbo with an automatic suspension. The original paint will be left alone, we will wet sand all the oxidation off, but the chassis, Interior and engine bay will be completed thoroughly. The idea is to build a nice driver that isn't so over the top that people can't feel its attainable or affordable, but also fast. So stay tuned for the build. This will be well documented. Free T-Shirt if you can tell me where this truck picture was taken.... But you may need to be from AZ. Attached Images

04-13-2015, 01:10 PM	#2
jimmyjammoto Registered User Join Date: Mar 2013 Location: Hubbard TX Posts: 73	Re: 1963 C10 Build Starting...... "Francis" Tombstone? Nice truck! Ballpark figure of what something like this went for..

04-13-2015, 02:06 PM	#4
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,927	Re: 1963 C10 Build Starting...... "Francis" Nogales, AZ? Maybe? Super nice truck BTW. I like the plan you have but the power would be too much for me! Hah! __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

04-13-2015, 08:48 PM	#6
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1963 C10 Build Starting...... "Francis" Prescott? Nice truck, hard to find a short bed fleet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.