NC WTB: Blazer Rear Hatch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drillrod · 04-29-2015, 09:25 PM

Its a longshot, but has anyone have a good hatch they would like to sell? Thanks

**1rippen6** · 04-30-2015, 11:29 AM

Looking for a bare hatch or something complete?

drillrod · 04-30-2015, 10:21 PM

Just the bare frame would be fine. I have all good glass and hardware in the one I have! If you might have one in good shape, send some pictures!

**1rippen6** · 05-01-2015, 04:46 PM

I am out of town can get you pictures next week

jeffg1010 · 05-01-2015, 07:11 PM

I have one that needs some fiberglass work. Not as bad as some I've seen. It was my plan B if I didn't find a good one.

drillrod · 05-01-2015, 07:43 PM

Jeff, thats the way my hatch is. It also needs fiberglass work. Let me see what rippen has to offer and I will keep you in mind. Thanks.

**1rippen6** · 05-04-2015, 10:35 PM

First hatch had new brackets for the hinges install they are stainless steel. The one hinge hole still needs some work that is where the plates were inserted. The latch brackets are not riveted in I can do that or send them along. All work was done by the previous owner I bought his collection. Tried to get pictures of everything does have some fiberglass work done to it but most is done just needs painted. The latch hole is real nice that is where a lot of them are busted out. Please ask if you would like other pictures.

**1rippen6** · 05-04-2015, 10:37 PM

more pics of hatch one. Sorry should have mentioned in first post 250 plus shipping

**1rippen6** · 05-04-2015, 10:55 PM

Second hatch just got that blazer this weekend. It is complete the one corner will need a little work but nothing bad can get better pictures if you are interested in this one. The one clip is missing on the handle mechanism but I can supply one. The only other issue is someone attached curtain rods to the hatch so the screw holes will need to be filled. 400 plus shipping

**1rippen6** · 05-04-2015, 10:56 PM

more of hatch 2 can get more pictures if needed

**1rippen6** · 05-04-2015, 10:58 PM

Last of second hatch the paint is peeling which is odd must have been repainted at some time

drillrod · 05-04-2015, 11:28 PM

See what the second hatch for 400 will cost shipped to 28458 as long as there is no major cracks which I did not see in the photos. Also, I am needing the correct lug wrench and folding jack handle for a blazer if you have one. the lug wrench that i have is 13/16 and is to big for the lugs on my blazer unless someone has changed the lug size on mine. Thanks David

**1rippen6** · 05-05-2015, 05:25 PM

Looks like shipping from fedEx is 109.26 I do have a folding jack handle and may have a lug wrench will have to check. I will look it over a lot better once I removed it looks real good but hard to tell around the hinge area until it is removed. Will let you know and take pictures if I find anything. I measured and weight another hatch that is busted up a little.

**1rippen6** · 05-05-2015, 09:23 PM

Looked tonight no lug wrench but I have the scissor jack handle 25 and I can throw it in with the hatch. If you don't take the hatch then plus shipping.

drillrod · 05-05-2015, 10:30 PM

I will take the hatch and jack handle if it is not broken in the hinge area when you take it off. Just let me know when you get it off. Thanks

**1rippen6** · 05-05-2015, 10:43 PM

Should be able to take it off tomorrow

**1rippen6** · 05-06-2015, 08:52 PM

1 has a hair line crack in the corner and the other one has 2 in the bottom corners.

**1rippen6** · 05-06-2015, 08:55 PM

It got dark on me I can get more pictures of the hatch beginning of the week working overtime the rest of the week and Saturday and Sunday. Also forgot I don't have a clip for the rod it was the wrong one.

drillrod · 05-06-2015, 09:16 PM

Would you do 500.00 shipped for the hatch and jack handle? If so, I will take it.

**1rippen6** · 05-06-2015, 09:18 PM

Let me double check the weigh now that I have it off and will let you know.

drillrod · 05-06-2015, 09:31 PM

Ok

**1rippen6** · 05-10-2015, 11:05 AM

I have been following your lug wrench post because I have one for myself but not sure if it was correct. Looking at the pictures that sharpie72 posted I am not sure if my jack handle is correct I assumed they were all the same but appears the blazer are shorter or maybe it is a year thing. I will get the hatch weight tomorrow.

drillrod · 05-10-2015, 02:28 PM

Ok, sounds good. I wish someone that has an original jack handle and lug wrench for a 72 K5 would post some pictures and measurements so we would no for sure!

**1rippen6** · 05-11-2015, 09:50 PM

I can do it for 500 shipped as long as you cover pp fees were you still interested in the jack handle.

drillrod · 05-11-2015, 10:07 PM

How long is the jack handle in the folded up position?

04-29-2015, 09:25 PM	#1
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	WTB: Blazer Rear Hatch Its a longshot, but has anyone have a good hatch they would like to sell? Thanks

04-30-2015, 11:29 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Looking for a bare hatch or something complete?

04-30-2015, 10:21 PM	#3
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch Just the bare frame would be fine. I have all good glass and hardware in the one I have! If you might have one in good shape, send some pictures!

05-01-2015, 04:46 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch I am out of town can get you pictures next week

05-01-2015, 07:11 PM	#5
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: WTB: Blazer Rear Hatch I have one that needs some fiberglass work. Not as bad as some I've seen. It was my plan B if I didn't find a good one. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

05-01-2015, 07:43 PM	#6
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch Jeff, thats the way my hatch is. It also needs fiberglass work. Let me see what rippen has to offer and I will keep you in mind. Thanks.

05-04-2015, 10:35 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch First hatch had new brackets for the hinges install they are stainless steel. The one hinge hole still needs some work that is where the plates were inserted. The latch brackets are not riveted in I can do that or send them along. All work was done by the previous owner I bought his collection. Tried to get pictures of everything does have some fiberglass work done to it but most is done just needs painted. The latch hole is real nice that is where a lot of them are busted out. Please ask if you would like other pictures. Attached Images

05-04-2015, 10:37 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch more pics of hatch one. Sorry should have mentioned in first post 250 plus shipping Attached Images

05-04-2015, 10:55 PM	#9
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Second hatch just got that blazer this weekend. It is complete the one corner will need a little work but nothing bad can get better pictures if you are interested in this one. The one clip is missing on the handle mechanism but I can supply one. The only other issue is someone attached curtain rods to the hatch so the screw holes will need to be filled. 400 plus shipping Attached Images

05-04-2015, 10:56 PM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch more of hatch 2 can get more pictures if needed Attached Images

05-04-2015, 10:58 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Last of second hatch the paint is peeling which is odd must have been repainted at some time Attached Images

05-04-2015, 11:28 PM	#12
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch See what the second hatch for 400 will cost shipped to 28458 as long as there is no major cracks which I did not see in the photos. Also, I am needing the correct lug wrench and folding jack handle for a blazer if you have one. the lug wrench that i have is 13/16 and is to big for the lugs on my blazer unless someone has changed the lug size on mine. Thanks David

05-05-2015, 05:25 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Looks like shipping from fedEx is 109.26 I do have a folding jack handle and may have a lug wrench will have to check. I will look it over a lot better once I removed it looks real good but hard to tell around the hinge area until it is removed. Will let you know and take pictures if I find anything. I measured and weight another hatch that is busted up a little.

05-05-2015, 09:23 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Looked tonight no lug wrench but I have the scissor jack handle 25 and I can throw it in with the hatch. If you don't take the hatch then plus shipping.

05-05-2015, 10:30 PM	#15
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch I will take the hatch and jack handle if it is not broken in the hinge area when you take it off. Just let me know when you get it off. Thanks



Register or Log In To remove these advertisements.

05-05-2015, 10:43 PM	#16
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Should be able to take it off tomorrow

05-06-2015, 08:52 PM	#17
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch 1 has a hair line crack in the corner and the other one has 2 in the bottom corners. Attached Images

05-06-2015, 08:55 PM	#18
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch It got dark on me I can get more pictures of the hatch beginning of the week working overtime the rest of the week and Saturday and Sunday. Also forgot I don't have a clip for the rod it was the wrong one.

05-06-2015, 09:16 PM	#19
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch Would you do 500.00 shipped for the hatch and jack handle? If so, I will take it.

05-06-2015, 09:18 PM	#20
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch Let me double check the weigh now that I have it off and will let you know.

05-06-2015, 09:31 PM	#21
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch Ok

05-10-2015, 11:05 AM	#22
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch I have been following your lug wrench post because I have one for myself but not sure if it was correct. Looking at the pictures that sharpie72 posted I am not sure if my jack handle is correct I assumed they were all the same but appears the blazer are shorter or maybe it is a year thing. I will get the hatch weight tomorrow.

05-10-2015, 02:28 PM	#23
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch Ok, sounds good. I wish someone that has an original jack handle and lug wrench for a 72 K5 would post some pictures and measurements so we would no for sure!

05-11-2015, 09:50 PM	#24
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB: Blazer Rear Hatch I can do it for 500 shipped as long as you cover pp fees were you still interested in the jack handle.

05-11-2015, 10:07 PM	#25
drillrod Registered User Join Date: May 2014 Location: Rose Hill NC Posts: 193	Re: WTB: Blazer Rear Hatch How long is the jack handle in the folded up position?

Register or Log In To remove these advertisements.