NJ blazer frame for sale or cut - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigrigpardo · 05-14-2015, 11:11 PM

Ok the cutting has begun. rear frame horns, exhaust brackets, and skid plate cross member are gone. shout out a need for something and I will price it. I wont price everything before hand so if you need it let me know and I will work a good deal for you. let me know what you need and I will get a price. this is a pretty rust free frame all around. no dual exhaust brackets

1972 Jimmy · 05-14-2015, 11:52 PM

How much for the rear skid plate cross member? (The cross member right behind the trans member) shipped to 48623. Do you have the skid plate as well?
Thanks,
Eric

bigrigpardo · 05-14-2015, 11:55 PM

I don't have the skid plate. could you do 75 shipped?

1972 Jimmy · 05-15-2015, 12:12 AM

Quote:

Originally Posted by bigrigpardo

I don't have the skid plate. could you do 75 shipped?

Bummer in the skid plate.... I would feel comfortable at $55 shipped. I can PayPal you funds right away.

Eric

**D.PASSMORE** · 05-15-2015, 06:41 AM

How much for these two pieces - exhaust hangers?

bigrigpardo · 05-15-2015, 09:58 AM

30 shipped?

**D.PASSMORE** · 05-15-2015, 11:04 AM

Ill do $25.00 shipped.

bigrigpardo · 05-15-2015, 08:48 PM

Quote:

Originally Posted by 1972 Jimmy

Bummer in the skid plate.... I would feel comfortable at $55 shipped. I can PayPal you funds right away.

Eric

I can do 60 shipped but it wont go out till next week if that's ok I need to pull the frame out of the back to pull the parts off.

bigrigpardo · 05-15-2015, 08:49 PM

Quote:

Originally Posted by D.PASSMORE

Ill do $25.00 shipped.

I can do 25 shipped for them

1972 Jimmy · 05-15-2015, 09:27 PM

Quote:

Originally Posted by bigrigpardo

I can do 60 shipped but it wont go out till next week if that's ok I need to pull the frame out of the back to pull the parts off.

PM Sent

walkintall54 · 05-16-2015, 02:07 AM

How much for the rear foot of frame ,from the crossmember back,to the end of the frame where the bumper bolts on?

walkintall54 · 05-16-2015, 02:09 AM

Oops forgot shipped to 92503

bigrigpardo · 05-16-2015, 11:30 AM

Quote:

Originally Posted by walkintall54

How much for the rear foot of frame ,from the crossmember back,to the end of the frame where the bumper bolts on?

do you need a full 12 inches or just from behind the cross member back. there is a trailer hitch welded on but it should grind off fine. may just need a little clean up when it comes to you and the rear drivers hole for the body mount is a little bigger from moisture between the mount but you wont see that and its still very solid trust me or with a little welding you can fill the hole in fine. the rest of the frame horns are in great shape. let me know how much you need so I can see how I have to ship it.

walkintall54 · 05-16-2015, 07:28 PM

Just from the crossmember back, Thanks

bigrigpardo · 05-16-2015, 08:15 PM

Quote:

Originally Posted by walkintall54

Just from the crossmember back, Thanks

hows 75 shipped and i will clean the welds off as best as possible.

**1rippen6** · 05-16-2015, 09:44 PM

If walkintall54 passes I would be interested

bigrigpardo · 05-16-2015, 10:12 PM

Quote:

Originally Posted by 1rippen6

If walkintall54 passes I would be interested

I will keep you posted. I will give him a day or two

BKSS67 · 05-18-2015, 12:42 PM

Hard to tell, is there a steering box reinforcement plate on the inner frame ?

If so, please let me know

Thanks

bigrigpardo · 05-26-2015, 10:28 PM

hey guys sorry for the delay. I got the parts removed today. will try to get them out tomorrow or Thursday the latest.

andrew

**D.PASSMORE** · 05-28-2015, 09:34 PM

Ready when ever you are!

bigrigpardo · 06-02-2015, 11:10 AM

ttt lets get the rest of this thing sold. lots of rust free brackets for sale.

bigrigpardo · 06-08-2015, 10:05 AM

ttt

**jaros44sr** · 06-09-2015, 06:24 PM

Andrew, any bump stops, front or rear, still on the frame?

bigrigpardo · 06-10-2015, 09:14 AM

Quote:

Originally Posted by jaros44sr

Andrew, any bump stops, front or rear, still on the frame?

yes I am pretty sure all 4 are there. hows 40 shipped

**jaros44sr** · 06-10-2015, 11:18 AM

Quote:

Originally Posted by bigrigpardo

yes I am pretty sure all 4 are there. hows 40 shipped

I only need two off the back, would you do 20.00 shipped

05-14-2015, 11:11 PM	#1
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	blazer frame for sale or cut Ok the cutting has begun. rear frame horns, exhaust brackets, and skid plate cross member are gone. shout out a need for something and I will price it. I wont price everything before hand so if you need it let me know and I will work a good deal for you. let me know what you need and I will get a price. this is a pretty rust free frame all around. no dual exhaust brackets Attached Images Last edited by bigrigpardo; 06-02-2015 at 11:09 AM.

05-14-2015, 11:52 PM	#2
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: blazer frame for sale or cut How much for the rear skid plate cross member? (The cross member right behind the trans member) shipped to 48623. Do you have the skid plate as well? Thanks, Eric

05-14-2015, 11:55 PM	#3
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: blazer frame for sale or cut I don't have the skid plate. could you do 75 shipped?

05-15-2015, 06:41 AM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: blazer frame for sale or cut How much for these two pieces - exhaust hangers? Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-15-2015, 09:58 AM	#6
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: blazer frame for sale or cut 30 shipped?

05-15-2015, 11:04 AM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: blazer frame for sale or cut Ill do $25.00 shipped. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-16-2015, 02:07 AM	#11
walkintall54 Registered User Join Date: May 2006 Location: riverside ca. Posts: 66	Re: blazer frame for sale or cut How much for the rear foot of frame ,from the crossmember back,to the end of the frame where the bumper bolts on?

05-16-2015, 02:09 AM	#12
walkintall54 Registered User Join Date: May 2006 Location: riverside ca. Posts: 66	Re: blazer frame for sale or cut Oops forgot shipped to 92503

05-16-2015, 07:28 PM	#14
walkintall54 Registered User Join Date: May 2006 Location: riverside ca. Posts: 66	Re: blazer frame for sale or cut Just from the crossmember back, Thanks

05-16-2015, 09:44 PM	#16
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: blazer frame for sale or cut If walkintall54 passes I would be interested

05-18-2015, 12:42 PM	#18
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: blazer frame for sale or cut Hard to tell, is there a steering box reinforcement plate on the inner frame ? If so, please let me know Thanks

05-26-2015, 10:28 PM	#19
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: blazer frame for sale or cut hey guys sorry for the delay. I got the parts removed today. will try to get them out tomorrow or Thursday the latest. andrew

05-28-2015, 09:34 PM	#20
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: blazer frame for sale or cut Ready when ever you are! __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

06-02-2015, 11:10 AM	#21
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: blazer frame for sale or cut ttt lets get the rest of this thing sold. lots of rust free brackets for sale.

06-08-2015, 10:05 AM	#22
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: blazer frame for sale or cut ttt



Register or Log In To remove these advertisements.

06-09-2015, 06:24 PM	#23
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: blazer frame for sale or cut Andrew, any bump stops, front or rear, still on the frame? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Register or Log In To remove these advertisements.