CA parting 1971 blazer bed floor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sawman · 05-21-2015, 08:32 PM

PRICES LOWERED 1971 blazer cst bed floor can cut any part you need,1 wheel hump has few dents the other is fine as seen in pic $90,e brake $45, bed floor SOLD 6-8inches and all the way across $136 shipped,seat springs frames no tracks $65shipped, almost done parting this blazer out,floor is very nice no rott,does have holes in certain spots were the big 38 gallon fuel tank bolts were,SOLD ITEMS FLOOR BRACES FOR SEATS,,UPPER WINDSHIELS HEADER,FLOOR AROUND WHEEL WELL HUMPS,FUEL TANK SIDE PANEL BACK AND TAILLIGHT AREA I PIECE,REAR INNER BUMPER BRACES,WING WINDOWS,STRIPS,FUEL PIPES,DOOR PARTS,TOP HOLD DOWN BRACKETS,FLOOR HUMP,GLOVE BOX DOOR,GAS PEDAL,DRIVERS FLOOR VENT HANDLE,

**1rippen6** · 05-21-2015, 08:48 PM

How much for the last 12 inches of the bed from quarter panel to quarter panel shipped to 17225.

1972 Jimmy · 05-21-2015, 09:37 PM

Would sell the chrome strips on the inside bed rail? If so I would be interested!
Thanks,
Eric

sawman · 05-22-2015, 12:10 AM

those were already sold,have the sides/bed/crossbrace/firewall/braces/motor crossbrace ect

ls1nova71 · 05-22-2015, 06:49 AM

How much for the chrome piece around the brake pedaland the pad? Is it worn through anywhere?

fear_nothing · 05-22-2015, 08:28 AM

I'd be interested in the part outlined in red, 12" give or take. Whats the ride to 33511 gonna cost?

Thanks

**1rippen6** · 05-22-2015, 08:58 AM

Quote:

Originally Posted by fear_nothing

I'd be interested in the part outlined in red, 12" give or take. Whats the ride to 33511 gonna cost?

Thanks

That's what I asked for in post 2

fear_nothing · 05-22-2015, 09:25 AM

Quote:

Originally Posted by 1rippen6

That's what I asked for in post 2

My bad - put me down for second in line if it doesn't work out.

1972 Jimmy · 05-22-2015, 09:28 AM

Quote:

Originally Posted by sawman

those were already sold,have the sides/bed/crossbrace/firewall/braces/motor crossbrace ect

It was worth a try!
Thanks,
Eric

bluek5 · 05-22-2015, 10:51 AM

Are you interested is selling the rear wheel wells?
Thanks, Paul

**1rippen6** · 05-22-2015, 04:31 PM

I will pass on the bed floor

sawman · 05-23-2015, 11:02 PM

still for sale

**68350** · 05-23-2015, 11:08 PM

Is the drivers side quarter panel good from wheel well to taillight?

sawman · 05-23-2015, 11:16 PM

yes,as seen inpictures top of bed side is push in alittle,both sides of the wheel well back are in good condition,its on a 71 cst

sawman · 05-23-2015, 11:18 PM

no rott at all on this blazer

**68350** · 05-24-2015, 10:26 PM

How much for the section from back of wheel well to taillight? Picture please?

sawman · 05-25-2015, 07:53 PM

has wear toward bottom right side can see it in picture,

**68350** · 05-25-2015, 08:17 PM

Not worried about inside. I need an outer skin to fix my quarter.

sawman · 05-28-2015, 03:17 PM

ttt

4cowboy · 06-01-2015, 12:11 AM

Is the seat bucket seat frames available, if so how much shipped?

sawman · 06-01-2015, 12:13 AM

there is no seat tracks,the seats have there frames/springs

4cowboy · 06-01-2015, 01:41 AM

Would the frames be reusable? not rusted out? How much for the 2 front seat frames shipped to ND ?

sawman · 06-01-2015, 03:53 PM

bumper brackets sold to forum user ,shipped

michael.howell12 · 06-01-2015, 07:02 PM

How much extra for the vent handle for the passenger side.

sawman · 06-01-2015, 07:06 PM

$5 will ship with header

05-21-2015, 08:32 PM	#1
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	parting 1971 blazer bed floor PRICES LOWERED 1971 blazer cst bed floor can cut any part you need,1 wheel hump has few dents the other is fine as seen in pic $90,e brake $45, bed floor SOLD 6-8inches and all the way across $136 shipped,seat springs frames no tracks $65shipped, almost done parting this blazer out,floor is very nice no rott,does have holes in certain spots were the big 38 gallon fuel tank bolts were,SOLD ITEMS FLOOR BRACES FOR SEATS,,UPPER WINDSHIELS HEADER,FLOOR AROUND WHEEL WELL HUMPS,FUEL TANK SIDE PANEL BACK AND TAILLIGHT AREA I PIECE,REAR INNER BUMPER BRACES,WING WINDOWS,STRIPS,FUEL PIPES,DOOR PARTS,TOP HOLD DOWN BRACKETS,FLOOR HUMP,GLOVE BOX DOOR,GAS PEDAL,DRIVERS FLOOR VENT HANDLE, Attached Images Last edited by sawman; 07-13-2015 at 01:09 AM.

05-21-2015, 08:48 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: parting 1971 blazer bed floor How much for the last 12 inches of the bed from quarter panel to quarter panel shipped to 17225.

05-21-2015, 09:37 PM	#3
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: parting 1971 blazer bed floor Would sell the chrome strips on the inside bed rail? If so I would be interested! Thanks, Eric

05-22-2015, 12:10 AM	#4
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor those were already sold,have the sides/bed/crossbrace/firewall/braces/motor crossbrace ect

05-22-2015, 06:49 AM	#5
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: parting 1971 blazer bed floor How much for the chrome piece around the brake pedaland the pad? Is it worn through anywhere? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

05-22-2015, 08:28 AM	#6
fear_nothing Registered User Join Date: Mar 2012 Location: Main Street, USA Posts: 87	Re: parting 1971 blazer bed floor I'd be interested in the part outlined in red, 12" give or take. Whats the ride to 33511 gonna cost? Thanks

05-22-2015, 10:51 AM	#10
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: parting 1971 blazer bed floor Are you interested is selling the rear wheel wells? Thanks, Paul

05-22-2015, 04:31 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: parting 1971 blazer bed floor I will pass on the bed floor

05-23-2015, 11:02 PM	#12
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor still for sale

05-23-2015, 11:08 PM	#13
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: parting 1971 blazer bed floor Is the drivers side quarter panel good from wheel well to taillight? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-23-2015, 11:16 PM	#14
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor yes,as seen inpictures top of bed side is push in alittle,both sides of the wheel well back are in good condition,its on a 71 cst

05-23-2015, 11:18 PM	#15
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor no rott at all on this blazer

05-24-2015, 10:26 PM	#16
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: parting 1971 blazer bed floor How much for the section from back of wheel well to taillight? Picture please? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-25-2015, 07:53 PM	#17
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor has wear toward bottom right side can see it in picture,

05-25-2015, 08:17 PM	#18
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: parting 1971 blazer bed floor Not worried about inside. I need an outer skin to fix my quarter. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi



Register or Log In To remove these advertisements.

05-28-2015, 03:17 PM	#19
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor ttt

06-01-2015, 12:11 AM	#20
4cowboy Registered User Join Date: Feb 2014 Location: North Dakota Posts: 17	Re: parting 1971 blazer bed floor Is the seat bucket seat frames available, if so how much shipped?

06-01-2015, 12:13 AM	#21
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor there is no seat tracks,the seats have there frames/springs

06-01-2015, 01:41 AM	#22
4cowboy Registered User Join Date: Feb 2014 Location: North Dakota Posts: 17	Re: parting 1971 blazer bed floor Would the frames be reusable? not rusted out? How much for the 2 front seat frames shipped to ND ?

06-01-2015, 03:53 PM	#23
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor bumper brackets sold to forum user ,shipped

06-01-2015, 07:02 PM	#24
michael.howell12 Registered User Join Date: Feb 2014 Location: Slapout Alabama Posts: 69	Re: parting 1971 blazer bed floor How much extra for the vent handle for the passenger side. Attached Images

06-01-2015, 07:06 PM	#25
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: parting 1971 blazer bed floor $5 will ship with header

Register or Log In To remove these advertisements.