Fine Custom Touches On This One - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-12-2015, 07:15 PM

I don't know the owner or anything about the truck. But, I saw it last week at the NSRA Nationals East

Ol 67 C10 · 06-12-2015, 08:46 PM

I see that truck is from VA. Any idea where he was from?

**special-K** · 06-12-2015, 09:20 PM

I'm afraid not. I never talked to the guy. He was talking to a few other guys and I didn't want to wait around. It was one of the first vehicles I checked out. I wanted to get back by and it never happened. This is a helluva big show

Ol 67 C10 · 06-12-2015, 09:22 PM

Where was the show?

**special-K** · 06-12-2015, 10:17 PM

Oops, I thought I mentioned that. This was last week in York, PA at the NSRA Nationals East. I think there are something like 3,000 entries at that show

68C15 · 06-13-2015, 07:03 AM

just think of the time it took getting the filler door shaped right. let alone doing the flush window job.

**special-K** · 06-13-2015, 07:12 AM

Right! It's those little details that come out huge. I'm not even into body mods or modernizing these trucks, but I can still appreciate tasteful changes, if that's what an owner wants. I figure that could be a 68-72 bedside, then came the tough job of altering that gas door to fit. That flush mount rear window took some work. I just realized I'm not sure if the windshield was done or not. You would think, but I'm not sure I even looked. Like I said, I had planned to come back. I was with a buddy and there were a lot of cars and trucks to see. I imagine I'll see that truck again

kingsolver72 · 06-13-2015, 12:37 PM

He frenched the antenna didn't shave the drip rail. I'm not a big fan of shaving the drip rail.
It definitely has some tasteful mods.

Tinkermc · 06-13-2015, 12:42 PM

Very nice!!! ThankZ 4 sharing

**special-K** · 06-13-2015, 05:24 PM

Yeah, I expected to see a shaved drip rail, too. I don't like that, but I wouldn't do any of the other stuff either. My buddy noticed the hem at the bottom of the rockers stuck out like a sore thumb with such a smooth look. I wouldn't do that, either, but have to agree this truck was calling for that. I guess we can always find something to point out when it's someone else's truck. Or, when it's all there done and looking at it is more like it, yours or theirs

kingsolver72 · 06-13-2015, 05:38 PM

Looks like he may have cleaned up the seam on the roof too.

**special-K** · 06-13-2015, 07:25 PM

That's right, he did fill that. So, I ssume you all noticed it says Silverod on the tailgate, right? That reminds me off a '78 Silverado I bought that had a Harley Davidson sticker on the back window. It was the early emblem type, just letters. I stared at that till I figured out you can actually get Silverado out of Harley Davidson. I went out and bought a sticker and rearranged it to say Silverado across the bottom of the window

**Boog** · 06-13-2015, 08:19 PM

You sure have to respect the fab skills of whoever built the truck.

kingstrider · 06-13-2015, 08:23 PM

Wow I wish I knew about it, I'm about an hour and a half from there.

hugger6933 · 06-13-2015, 09:38 PM

There is a company that does those flush mount back glasses he has a you tube thing on them. They don't impress much [the guys doing the install] the truck they did it on probably doubled in value once he paid for the glass work if you know what I mean. I don't think they are terrible expensive either.

**special-K** · 06-14-2015, 08:26 AM

Quote:

Originally Posted by kingstrider

Wow I wish I knew about it, I'm about an hour and a half from there.

It's always the first weekend in June. Next year just remember to Google NSRA Nationals East, or just NSRA and on their site they will show a schedule of events. I try to catch this every year. One of my must-dos for the summer. Coming up on June 28th is the 26th annual show held by Liberty Street Rods in Winfield, MD (Carroll County). Check the Wuzzup 2015 thread in the regions section (NW). Posted the info there. It's about 1/10th the size, being local, but 300 cars is something worth looking at. It's always on a Sunday

kotapug · 06-14-2015, 10:06 AM

They sell a flush window kit seems pretty simple to do . I will be buying it for my 67 small window

slikside · 06-14-2015, 10:12 AM

Quote:

Originally Posted by hugger6933

There is a company that does those flush mount back glasses he has a you tube thing on them. They don't impress much [the guys doing the install] the truck they did it on probably doubled in value once he paid for the glass work if you know what I mean. I don't think they are terrible expensive either.

Yup. Saw that too.

06-12-2015, 07:15 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Fine Custom Touches On This One I don't know the owner or anything about the truck. But, I saw it last week at the NSRA Nationals East Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-12-2015, 08:46 PM	#2
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Fine Custom Touches On This One I see that truck is from VA. Any idea where he was from? __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

06-12-2015, 09:20 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Fine Custom Touches On This One I'm afraid not. I never talked to the guy. He was talking to a few other guys and I didn't want to wait around. It was one of the first vehicles I checked out. I wanted to get back by and it never happened. This is a helluva big show __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-12-2015, 09:22 PM	#4
Ol 67 C10 Registered User Join Date: Nov 2014 Location: Fulks Run, VA Posts: 206	Re: Fine Custom Touches On This One Where was the show? __________________ 67 Chevy Shortbed Fleetside C10 400 SBC/Turbo 350/Posi 62 Impala SS (Clone) 350 SBC/4 Speed/3:36 Posi Rear 2003 Silverado Crew Cab (Black) 2500 HD 4x4/6.0L/Auto/Posi

06-12-2015, 10:17 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Fine Custom Touches On This One Oops, I thought I mentioned that. This was last week in York, PA at the NSRA Nationals East. I think there are something like 3,000 entries at that show __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2015, 07:03 AM	#6
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Fine Custom Touches On This One just think of the time it took getting the filler door shaped right. let alone doing the flush window job. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

06-13-2015, 07:12 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Fine Custom Touches On This One Right! It's those little details that come out huge. I'm not even into body mods or modernizing these trucks, but I can still appreciate tasteful changes, if that's what an owner wants. I figure that could be a 68-72 bedside, then came the tough job of altering that gas door to fit. That flush mount rear window took some work. I just realized I'm not sure if the windshield was done or not. You would think, but I'm not sure I even looked. Like I said, I had planned to come back. I was with a buddy and there were a lot of cars and trucks to see. I imagine I'll see that truck again __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2015, 12:37 PM	#8
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,205	Re: Fine Custom Touches On This One He frenched the antenna didn't shave the drip rail. I'm not a big fan of shaving the drip rail. It definitely has some tasteful mods. __________________ Fight the good fight, finish the race, keep the faith

06-13-2015, 12:42 PM	#9
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Fine Custom Touches On This One Very nice!!! ThankZ 4 sharing

06-13-2015, 05:24 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Fine Custom Touches On This One Yeah, I expected to see a shaved drip rail, too. I don't like that, but I wouldn't do any of the other stuff either. My buddy noticed the hem at the bottom of the rockers stuck out like a sore thumb with such a smooth look. I wouldn't do that, either, but have to agree this truck was calling for that. I guess we can always find something to point out when it's someone else's truck. Or, when it's all there done and looking at it is more like it, yours or theirs __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2015, 05:38 PM	#11
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,205	Re: Fine Custom Touches On This One Looks like he may have cleaned up the seam on the roof too. __________________ Fight the good fight, finish the race, keep the faith

06-13-2015, 07:25 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Fine Custom Touches On This One That's right, he did fill that. So, I ssume you all noticed it says Silverod on the tailgate, right? That reminds me off a '78 Silverado I bought that had a Harley Davidson sticker on the back window. It was the early emblem type, just letters. I stared at that till I figured out you can actually get Silverado out of Harley Davidson. I went out and bought a sticker and rearranged it to say Silverado across the bottom of the window __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-13-2015, 08:19 PM	#13
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,103	Re: Fine Custom Touches On This One You sure have to respect the fab skills of whoever built the truck. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

06-13-2015, 08:23 PM	#14
kingstrider Registered User Join Date: Jan 2015 Location: Uncle Sam knows Posts: 286	Re: Fine Custom Touches On This One Wow I wish I knew about it, I'm about an hour and a half from there.

06-13-2015, 09:38 PM	#15
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,261	Re: Fine Custom Touches On This One There is a company that does those flush mount back glasses he has a you tube thing on them. They don't impress much [the guys doing the install] the truck they did it on probably doubled in value once he paid for the glass work if you know what I mean. I don't think they are terrible expensive either.



Register or Log In To remove these advertisements.

06-14-2015, 10:06 AM	#17
kotapug Registered User Join Date: Sep 2013 Location: S MN Posts: 35	Re: Fine Custom Touches On This One They sell a flush window kit seems pretty simple to do . I will be buying it for my 67 small window

Register or Log In To remove these advertisements.