TX GM 471634 "clam shell" motor mount brackets for 4WD trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 06-20-2015, 01:44 PM

Used on 79-83 K10-20-30 trucks with 305-350, and 82-83 K10-20-30 trucks with 6.2 liter diesel.

Recently bead blasted and primed inside and out. Painted on the outside. I tried to use them on my C10, but they aren't as tall as the 2WD brackets.

No rust, no dents, no modifications.

$50/pr + actual shipping costs. Send me a PM if interested.

esbstuff · 06-20-2015, 03:11 PM

$50 total shipped to 65584?

**MikeB** · 06-20-2015, 06:29 PM

I'll box them up and see what shipping will cost me. I'm retired, so no longer get great UPS rates at my old company. Can probably do it for $60 shipped.

I think UPS needs to offer a 5-8 day rate!

06-20-2015, 01:44 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	GM 471634 "clam shell" motor mount brackets for 4WD trucks Used on 79-83 K10-20-30 trucks with 305-350, and 82-83 K10-20-30 trucks with 6.2 liter diesel. Recently bead blasted and primed inside and out. Painted on the outside. I tried to use them on my C10, but they aren't as tall as the 2WD brackets. No rust, no dents, no modifications. $50/pr + actual shipping costs. Send me a PM if interested. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

06-20-2015, 03:11 PM	#2
esbstuff Registered User Join Date: Jun 2011 Location: St Robert, Mo Posts: 730	Re: GM 471634 "clam shell" motor mount brackets for 4WD trucks $50 total shipped to 65584?

06-20-2015, 06:29 PM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: GM 471634 "clam shell" motor mount brackets for 4WD trucks I'll box them up and see what shipping will cost me. I'm retired, so no longer get great UPS rates at my old company. Can probably do it for $60 shipped. I think UPS needs to offer a 5-8 day rate! __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! Last edited by MikeB; 06-21-2015 at 08:11 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.