Can i see 67-72 trucks with a 6 inch lift and 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lifted68gmc · 06-28-2015, 07:24 PM

looking to do a lift on my project 1968 gmc 2500 4wd and i am having a hard time finding a full leaf spring kit, so i am going to have to peice one together. But my main question is can i see some 67-72 trucks with a 6 inch lift on 35s (preferably longbeds, but show me shortbeds too)
thanks

-1968 gmc k2500 4wd with roller 350 and heads 400+ hp, soon to be bottom end work

sboris · 06-28-2015, 07:30 PM

Heres an excellent place to look
http://67-72chevytrucks.com/vboard/f...splay.php?f=30

Cooper Restorations · 06-28-2015, 07:34 PM

Name: lineup3.jpg
Views: 781
Size: 57.3 KB

Here is mine in progress with 35x12.50x15

lifted68gmc · 06-28-2015, 07:51 PM

Quote:

Originally Posted by Cooper Restorations

Attachment 1420350
Here is mine in progress with 35x12.50x15

looks good man, that is a 6 inch lift?

Cooper Restorations · 06-28-2015, 07:54 PM

Yeah... it's 6 inches. Not a ton of extra room for the BFG's. I hope it's enough!!!!

**71blksuper4x4** · 06-28-2015, 08:05 PM

Quote:

Originally Posted by Cooper Restorations

Yeah... it's 6 inches. Not a ton of extra room for the BFG's. I hope it's enough!!!!

You will be fine. I ran 35-12.50-15 bfg on my 71 with 4" lift for years.

**special-K** · 06-28-2015, 11:14 PM

Yup, that combo works fine

Cooper Restorations · 06-28-2015, 11:16 PM

That looks good!!!

lifted68gmc · 06-28-2015, 11:42 PM

Quote:

Originally Posted by Cooper Restorations

That looks good!!!

Yeah it looks right
Posted via Mobile Device

**special-K** · 06-29-2015, 08:29 AM

18" of snow, no problem

WarMonger · 06-29-2015, 10:25 AM

those trucks are so cool.

**special-K** · 06-29-2015, 11:04 AM

Quote:

Originally Posted by Cooper Restorations

That looks good!!!

Yours ain't too shabby, either!

I'm about to finally do a 4" lift on my '72 K2500 and put these 35/12.50-16.5 BFG/ATs & 9.75 aluminum slots on. I had another 6" lift, 37/12.50-16.5 Swamper SSRs, and 8.25 steelies for it but sold that stuff to stay a bit smaller this time. when the BFGs are shot I'll go to 16 x 8 steelies with 285/75s. May go lower then. I've had lifted trucks since '77 and am finally getting it out of my system...or these trucks have gotten so classic my tastes have turned to close to stock only beefier. I also have a Dana60 front axle, HO52 No-Spin, and TH400/NP205 I want to use some day. Kind of a sleeper badass 4wd is what I'm after. I'm waiting for all that till I rebuild the original 350 into a 383. Then there are those mint Custom Camper 3500 emblems and the cab light cab in mothballs, too. Who knows, maybe I'll even restore the truck one day

57taskforce · 06-29-2015, 01:17 PM

Quote:

Originally Posted by special-K

Yours ain't too shabby, either!

I'm about to finally do a 4" lift on my '72 K2500 and put these 35/12.50-16.5 BFG/ATs & 9.75 aluminum slots on. I had another 6" lift, 37/12.50-16.5 Swamper SSRs, and 8.25 steelies for it but sold that stuff to stay a bit smaller this time. when the BFGs are shot I'll go to 16 x 8 steelies with 285/75s. May go lower then. I've had lifted trucks since '77 and am finally getting it out of my system...or these trucks have gotten so classic my tastes have turned to close to stock only beefier. I also have a Dana60 front axle, HO52 No-Spin, and TH400/NP205 I want to use some day. Kind of a sleeper badass 4wd is what I'm after. I'm waiting for all that till I rebuild the original 350 into a 383. Then there are those mint Custom Camper 3500 emblems and the cab light cab in mothballs, too. Who knows, maybe I'll even restore the truck one day

Tim you've had some amazing stuff thru the years! Did you sell that highlander local? Before I moved I saw one very similar to yours in Winchester... Probably sept-October '13. On a side not I'm coming home next month for a couple weeks we should meet up!

**special-K** · 07-01-2015, 08:33 AM

Yes, I sold it local but in a different direction. My buddy up near Hanover,PA has it and it's in full restoration*. That may be the one Jimmer64 had and sold at Carlisle Trucks a couple few years ago. I think it did go to Winchester or there abouts. Jim lives in Lancaster Co. PA. I think his had 7" wheels, 285/75s, with stock hubcaps when he sold it, but it sat up higher than stock.

*Back to 100% original K/20 Custom Deluxe Highlander, per build sheet.

lifted68gmc · 08-09-2015, 11:36 PM

Quote:

Originally Posted by special-K

Yup, that combo works fine

hey special k did you have to lengthen the driveshafts with the 6 inch lift
thanks

06-28-2015, 07:24 PM	#1
lifted68gmc Registered User Join Date: Apr 2015 Location: littleton Posts: 4	Can i see 67-72 trucks with a 6 inch lift and 35 looking to do a lift on my project 1968 gmc 2500 4wd and i am having a hard time finding a full leaf spring kit, so i am going to have to peice one together. But my main question is can i see some 67-72 trucks with a 6 inch lift on 35s (preferably longbeds, but show me shortbeds too) thanks -1968 gmc k2500 4wd with roller 350 and heads 400+ hp, soon to be bottom end work

06-28-2015, 07:30 PM	#2
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: Can i see 67-72 trucks with a 6 inch lift and 35 Heres an excellent place to look http://67-72chevytrucks.com/vboard/f...splay.php?f=30 __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

06-28-2015, 07:34 PM	#3
Cooper Restorations Registered User Join Date: Jan 2015 Location: Marion Indiana Posts: 403	Re: Can i see 67-72 trucks with a 6 inch lift and 35 Here is mine in progress with 35x12.50x15

06-28-2015, 07:54 PM	#5
Cooper Restorations Registered User Join Date: Jan 2015 Location: Marion Indiana Posts: 403	Re: Can i see 67-72 trucks with a 6 inch lift and 35 Yeah... it's 6 inches. Not a ton of extra room for the BFG's. I hope it's enough!!!!

06-28-2015, 11:14 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Can i see 67-72 trucks with a 6 inch lift and 35 Yup, that combo works fine Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-28-2015, 11:16 PM	#8
Cooper Restorations Registered User Join Date: Jan 2015 Location: Marion Indiana Posts: 403	Re: Can i see 67-72 trucks with a 6 inch lift and 35 That looks good!!!

06-29-2015, 08:29 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Can i see 67-72 trucks with a 6 inch lift and 35 18" of snow, no problem Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-29-2015, 10:25 AM	#11
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: Can i see 67-72 trucks with a 6 inch lift and 35 those trucks are so cool. __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

07-01-2015, 08:33 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Can i see 67-72 trucks with a 6 inch lift and 35 Yes, I sold it local but in a different direction. My buddy up near Hanover,PA has it and it's in full restoration. That may be the one Jimmer64 had and sold at Carlisle Trucks a couple few years ago. I think it did go to Winchester or there abouts. Jim lives in Lancaster Co. PA. I think his had 7" wheels, 285/75s, with stock hubcaps when he sold it, but it sat up higher than stock. Back to 100% original K/20 Custom Deluxe Highlander, per build sheet. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.