Anybody know any fabricators? Chassis fabricator that is... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tiddlar · 07-11-2015, 02:12 PM

post info here thanks

SCOTI · 07-11-2015, 02:17 PM

Tre5 Customs in Peoria AZ or Porterbuilt

tiddlar · 07-11-2015, 02:38 PM

thank you never heard of tre 5. will check them out

**PGSigns** · 07-11-2015, 08:44 PM

No limit also.
Jimmy

andrewmp6 · 07-15-2015, 09:29 PM

http://roadstershop.com/ has a frame for just about anything.

SCOTI · 07-15-2015, 10:02 PM

I assumed he meant in his area??

Pro Performance · 07-15-2015, 11:18 PM

I recommend Tre5 also, and does nice work.

tiddlar · 07-15-2015, 11:19 PM

Well I had found an original fabricator but he has had my truck going to be 6 months now. It gets getting pushed back. All parts are bought brakes wheels. Tires rear end air bags , accuair etc...my truck is in the Midwest. So location not really an issue but prefer not to go further east. Roadster shop is a huge name I would be scared to ask how much.
Posted via Mobile Device

tiddlar · 07-15-2015, 11:21 PM

Quote:

Originally Posted by Pro Performance

I recommend Tre5 also, and does nice work.

Talked to tre5 waiting on reply
Posted via Mobile Device

broey · 07-15-2015, 11:31 PM

Quote:

Originally Posted by tiddlar

Talked to tre5 waiting on reply
Posted via Mobile Device

x3 for jeremy of tre5 he is an expert craftsman and very well knowledged on c10s

tiddlar · 07-15-2015, 11:47 PM

Quote:

Originally Posted by broey

x3 for jeremy of tre5 he is an expert craftsman and very well knowledged on c10s

Mine is. 1953 Chevy truck ..
Posted via Mobile Device

BossHogg69 · 07-16-2015, 12:18 AM

Art Morrison has nice stuff for AD trucks too.

tinydb84 · 07-16-2015, 12:55 AM

Dewayne at NSane. He has a few builds on here and is a sponsor. Tre5 does amazing work too. Stone Fab Customs in Fresno Ca.

Warrens69GMC · 07-16-2015, 02:02 AM

http://www.industrialchassisinc.com/?cat=138

El Polacko

andrewmp6 · 07-16-2015, 04:42 AM

What year truck you got ?

tiddlar · 07-16-2015, 08:23 AM

Quote:

Originally Posted by andrewmp6

What year truck you got ?

53
Posted via Mobile Device

tiddlar · 07-16-2015, 03:13 PM

thanks everyone, a lot of messages sent today to some of these fabricators

andrewmp6 · 07-17-2015, 01:28 AM

What is it your having done to it,Are we talking having a new frame build or a turn key truck built?

tiddlar · 07-17-2015, 09:00 AM

Quote:

Originally Posted by andrewmp6

What is it your having done to it,Are we talking having a new frame build or a turn key truck built?

No just chassis air management and sheet metal work
Posted via Mobile Device

andrewmp6 · 07-18-2015, 03:13 AM

Yeah 6 months hes dragging his feet on your truck don't blame you for going else where.

broey · 07-18-2015, 07:51 PM

Quote:

Originally Posted by tiddlar

Mine is. 1953 Chevy truck ..
Posted via Mobile Device

thats fine, he's done plenty of the ad trucks too, he's actually working on a 49 for himself right now.

solidaxel · 10-06-2015, 08:45 AM

So where did you end up?
Is the builder in Tucson?

tiddlar · 10-06-2015, 11:14 AM

Quote:

Originally Posted by solidaxel

So where did you end up?
Is the builder in Tucson?

No I found someone in Joplin mo through here actually .
Posted via Mobile Device

07-11-2015, 02:12 PM	#1
tiddlar Registered User Join Date: May 2014 Location: Tucson, AZ Posts: 517	Anybody know any fabricators? Chassis fabricator that is... post info here thanks

07-11-2015, 02:17 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,939	Re: Anybody know any fabricators? Chassis fabricator that is... Tre5 Customs in Peoria AZ or Porterbuilt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-11-2015, 02:38 PM	#3
tiddlar Registered User Join Date: May 2014 Location: Tucson, AZ Posts: 517	Re: Anybody know any fabricators? Chassis fabricator that is... thank you never heard of tre 5. will check them out

07-11-2015, 08:44 PM	#4
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Anybody know any fabricators? Chassis fabricator that is... No limit also. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

07-15-2015, 09:29 PM	#5
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Anybody know any fabricators? Chassis fabricator that is... http://roadstershop.com/ has a frame for just about anything.

07-15-2015, 10:02 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,939	Re: Anybody know any fabricators? Chassis fabricator that is... I assumed he meant in his area?? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-15-2015, 11:18 PM	#7
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Anybody know any fabricators? Chassis fabricator that is... I recommend Tre5 also, and does nice work.

07-15-2015, 11:19 PM	#8
tiddlar Registered User Join Date: May 2014 Location: Tucson, AZ Posts: 517	Well I had found an original fabricator but he has had my truck going to be 6 months now. It gets getting pushed back. All parts are bought brakes wheels. Tires rear end air bags , accuair etc...my truck is in the Midwest. So location not really an issue but prefer not to go further east. Roadster shop is a huge name I would be scared to ask how much. Posted via Mobile Device

07-16-2015, 12:18 AM	#12
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Anybody know any fabricators? Chassis fabricator that is... Art Morrison has nice stuff for AD trucks too. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

07-16-2015, 12:55 AM	#13
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: Anybody know any fabricators? Chassis fabricator that is... Dewayne at NSane. He has a few builds on here and is a sponsor. Tre5 does amazing work too. Stone Fab Customs in Fresno Ca. __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

07-16-2015, 02:02 AM	#14
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: Anybody know any fabricators? Chassis fabricator that is... http://www.industrialchassisinc.com/?cat=138 El Polacko

07-16-2015, 04:42 AM	#15
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Anybody know any fabricators? Chassis fabricator that is... What year truck you got ?

07-16-2015, 03:13 PM	#17
tiddlar Registered User Join Date: May 2014 Location: Tucson, AZ Posts: 517	Re: Anybody know any fabricators? Chassis fabricator that is... thanks everyone, a lot of messages sent today to some of these fabricators

07-17-2015, 01:28 AM	#18
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Anybody know any fabricators? Chassis fabricator that is... What is it your having done to it,Are we talking having a new frame build or a turn key truck built?

07-18-2015, 03:13 AM	#20
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Anybody know any fabricators? Chassis fabricator that is... Yeah 6 months hes dragging his feet on your truck don't blame you for going else where.



Register or Log In To remove these advertisements.

10-06-2015, 08:45 AM	#22
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Anybody know any fabricators? Chassis fabricator that is... So where did you end up? Is the builder in Tucson? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

Register or Log In To remove these advertisements.