'69 chevy c-10 blower fan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

macdodd · 07-27-2015, 08:47 AM

Good morning all,,,,,I'm wondering if anyone in here has replaced the heater fan motor in their trucks? Mine is the original motor. I'm wonder if there is a more powerful motor(higher rpms) that I can put in it. I don't know if the replacement motor from LMC would put out more air,,,,. Any input would be great,,,,thanks,,Bill.

**LockDoc** · 07-27-2015, 09:33 AM

Quote:

Originally Posted by macdodd

Good morning all,,,,,I'm wondering if anyone in here has replaced the heater fan motor in their trucks? Mine is the original motor. I'm wonder if there is a more powerful motor(higher rpms) that I can put in it. I don't know if the replacement motor from LMC would put out more air,,,,. Any input would be great,,,,thanks,,Bill.

Hi Bill,

I think the blower motors for trucks with A/C might have a few more RPM's. If you are not getting enough air through your system now I would suspect a problem with junk or mouse nests in your heater boxes. If everything is clean and open in the heating system, and the ductwork is in place, the heaters and defrosters work great in these trucks. You could take the blower motor out and bench test it to see of it has any problems. That way you can check the squirrel cage for holes and check the outer heater box for debris and mouse nests....

LockDoc

hamjet · 07-27-2015, 09:45 AM

X2 what Leon said. Also make sure its going in all 3 speeds. sometimes the fan speed lever doesn't put it in high speed.

RustyBucket · 07-27-2015, 11:13 AM

$20 at Oreilly.... bought one for my Blazer awhile back 'cause it was SQUEALIN'. Cleaned a LOT of trash out of there too.

**michael bustamante** · 07-27-2015, 11:43 AM

ive read where some truck folk replace the plastic squirrel cage with a metal one.

Twisted78SS · 07-27-2015, 12:01 PM

I thought there was a thread (might be in the 73-87 section) where guys were using the heater motor/cage assy. from something like a late 80's C30 with a/c. Supposed to be a direct fit, steel cage, and much higher rpm. I'll see if I can find it

Twisted78SS · 07-27-2015, 12:20 PM

didn't find the thread i was thinking about, but saw a few reference the following.

Go to either O'Reilly or Autozone and tell em you want part number "pm129". I for some reason they don't wanna give it to you without looking it up give em a 94 chevy pickup k1500 with a 5.7l v8, and they'll pull up the number I gave you.

**LockDoc** · 07-27-2015, 12:30 PM

Quote:

Originally Posted by Twisted78SS

didn't find the thread i was thinking about, but saw a few reference the following.

Go to either O'Reilly or Autozone and tell em you want part number "pm129". I for some reason they don't wanna give it to you without looking it up give em a 94 chevy pickup k1500 with a 5.7l v8, and they'll pull up the number I gave you.

I don't think that one will fit. I think the squirrel cage is deeper. I was wrong once before though...

... Just be sure and take your old one with you.

LockDoc

macdodd · 07-27-2015, 02:55 PM

K,,,,thanks guys,,,,,I don't have air on mine. I'll pull the box out under the hood,,,,,and mine sure sound or feel like its got 3 speeds. You can barely feel the air moving,,,,will check all of the above,,,,thanks again,,,,Bill

macdodd · 07-28-2015, 09:09 PM

LOL,,,update,,,,I pulled the inside vent box,,,mouse nest,,,etc. Had to rework the flap that controls the air flow to the upper vents,,,couldn't find where to get one,,,,it'll be fine. Cleaned all the vents out,,got to get new hoses too,,,might as while I got it all tore out,,,,thanks again for all the input,,,,Bill

**LockDoc** · 07-28-2015, 09:58 PM

Quote:

Originally Posted by macdodd

LOL,,,update,,,,I pulled the inside vent box,,,mouse nest,,,etc. Had to rework the flap that controls the air flow to the upper vents,,,couldn't find where to get one,,,,it'll be fine. Cleaned all the vents out,,got to get new hoses too,,,might as while I got it all tore out,,,,thanks again for all the input,,,,Bill

The outside box will probably be full too, on the other side of the heater core. It's not as easy to get off.

LockDoc

macdodd · 07-29-2015, 01:25 PM

I checked up toward the heater core,,,doesn't look that bad,,,took a air hose and gently blew air up in there while running the fan,,,

Twisted78SS · 07-29-2015, 01:32 PM

Quote:

Originally Posted by LockDoc

I don't think that one will fit. I think the squirrel cage is deeper. I was wrong once before though...

... Just be sure and take your old one with you.

LockDoc

well, it would not surprise me if I was wrong.. happens all to often these days

macdodd · 07-30-2015, 04:07 PM

I checked up toward the heater core,,,doesn't look that bad,,,took a air hose and gently blew air up in there while running the fan,,,

07-27-2015, 08:47 AM	#1
macdodd Registered User Join Date: Jan 2015 Location: Hudson, fl Posts: 118	'69 chevy c-10 blower fan Good morning all,,,,,I'm wondering if anyone in here has replaced the heater fan motor in their trucks? Mine is the original motor. I'm wonder if there is a more powerful motor(higher rpms) that I can put in it. I don't know if the replacement motor from LMC would put out more air,,,,. Any input would be great,,,,thanks,,Bill.

07-27-2015, 09:45 AM	#3
hamjet Registered User Join Date: Apr 2013 Location: South Westerlo, New York Posts: 1,325	Re: '69 chevy c-10 blower fan X2 what Leon said. Also make sure its going in all 3 speeds. sometimes the fan speed lever doesn't put it in high speed. __________________ Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.

07-27-2015, 11:13 AM	#4
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,055	Re: '69 chevy c-10 blower fan $20 at Oreilly.... bought one for my Blazer awhile back 'cause it was SQUEALIN'. Cleaned a LOT of trash out of there too. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

07-27-2015, 11:43 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: '69 chevy c-10 blower fan ive read where some truck folk replace the plastic squirrel cage with a metal one. __________________ 1967custom

07-27-2015, 12:01 PM	#6
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: '69 chevy c-10 blower fan I thought there was a thread (might be in the 73-87 section) where guys were using the heater motor/cage assy. from something like a late 80's C30 with a/c. Supposed to be a direct fit, steel cage, and much higher rpm. I'll see if I can find it __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

07-27-2015, 12:20 PM	#7
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: '69 chevy c-10 blower fan didn't find the thread i was thinking about, but saw a few reference the following. Go to either O'Reilly or Autozone and tell em you want part number "pm129". I for some reason they don't wanna give it to you without looking it up give em a 94 chevy pickup k1500 with a 5.7l v8, and they'll pull up the number I gave you. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

07-27-2015, 02:55 PM	#9
macdodd Registered User Join Date: Jan 2015 Location: Hudson, fl Posts: 118	Re: '69 chevy c-10 blower fan K,,,,thanks guys,,,,,I don't have air on mine. I'll pull the box out under the hood,,,,,and mine sure sound or feel like its got 3 speeds. You can barely feel the air moving,,,,will check all of the above,,,,thanks again,,,,Bill

07-28-2015, 09:09 PM	#10
macdodd Registered User Join Date: Jan 2015 Location: Hudson, fl Posts: 118	Re: '69 chevy c-10 blower fan LOL,,,update,,,,I pulled the inside vent box,,,mouse nest,,,etc. Had to rework the flap that controls the air flow to the upper vents,,,couldn't find where to get one,,,,it'll be fine. Cleaned all the vents out,,got to get new hoses too,,,might as while I got it all tore out,,,,thanks again for all the input,,,,Bill

07-29-2015, 01:25 PM	#12
macdodd Registered User Join Date: Jan 2015 Location: Hudson, fl Posts: 118	Re: '69 chevy c-10 blower fan I checked up toward the heater core,,,doesn't look that bad,,,took a air hose and gently blew air up in there while running the fan,,,

07-30-2015, 04:07 PM	#14
macdodd Registered User Join Date: Jan 2015 Location: Hudson, fl Posts: 118	Re: '69 chevy c-10 blower fan I checked up toward the heater core,,,doesn't look that bad,,,took a air hose and gently blew air up in there while running the fan,,,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.