Needing help on which ac bracket to use - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**blazercrazy70** · 07-29-2015, 06:54 PM

I am putting in a LS motor with ece motor mounts and wondering if I can use lower ac bracket or do I need the mount in the upper position

dwcsr · 07-29-2015, 07:56 PM

Most of the after marker compressors do allow enough room with the stock compressor. You can get the Holley LS brackets that look stock but hang the ac compressor up higher

30 a truck · 07-30-2015, 05:49 AM

I used Zoops on this LS in a 30 A truck.

cooperhw · 07-30-2015, 10:23 AM

I put an LS in my Chevelle and tried to use the low mount compressor. Even notched the frame to allow it room. Ended up calling Kwik and bought one of there kits with compressor included that mounted it up high on the passenger side.

Andy4639 · 07-30-2015, 12:26 PM

LS1 brackets.
This is what I used in my 71 C10.

07-29-2015, 06:54 PM	#1
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Needing help on which ac bracket to use I am putting in a LS motor with ece motor mounts and wondering if I can use lower ac bracket or do I need the mount in the upper position

07-29-2015, 07:56 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Needing help on which ac bracket to use Most of the after marker compressors do allow enough room with the stock compressor. You can get the Holley LS brackets that look stock but hang the ac compressor up higher

07-30-2015, 05:49 AM	#3
30 a truck Registered User Join Date: Jan 2014 Location: Cowpens S.C. Posts: 138	Re: Needing help on which ac bracket to use I used Zoops on this LS in a 30 A truck. Attached Images

07-30-2015, 10:23 AM	#4
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: Needing help on which ac bracket to use I put an LS in my Chevelle and tried to use the low mount compressor. Even notched the frame to allow it room. Ended up calling Kwik and bought one of there kits with compressor included that mounted it up high on the passenger side. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

07-30-2015, 12:26 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Needing help on which ac bracket to use LS1 brackets. This is what I used in my 71 C10. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.