1967 Chevy Shortbed 1/2 Ton Restored For Sale Paint Ready Nice Stepside

[Tony Stewart]

Hi all I Have a 67 chevy shortbed stepside for sale price Is 8500 but may negoiate a few dollars but not much.The truck Is paint ready and In urethane primer and has new metal and the truck Is restored as a partial frame off.everythings new Including rebuilt numbers matching 283 recently updated with HEI.has granny low 4 speed and a 3:73 12 bolt posi rearend.truck has new battery,newer radiator new cab corners rocker panels,new metal In rear fenders,new tailgate,new headlights,tailights and tailight wire covers In stainless,new weatherstripping,door seal plates window felt,window channel runner felts,new front bumper In chrome,new rear chrome bumper,also new.bumper bolts.all new white face guages In dash,I restored the dash plastic as well.new fresh rebuilt carbuerator,new bumper bracket on 1 side In front could use new for other side or could use old?new brake lines totally on rear new wheel cyclinders,hold downs brakes and return strings and new main line to rear brakes.and new brake hoses.new front brakes.new tires and wheels 1.000 worth.the wheels are corvette style 6 lug rallys that have all new (center caps good stainless 1's not junk plastic coated caps) and beauty rings and the wheels are powder coated as well.I replaced hood with better original gm hood and better gm grill.has new dimmer switch and new bed floor side channels.frames been repainted 3/4 the way up to the front as well as the fender wells and radiator support and the front of the firewall engine was repainted when rebuilt.truck was stripped down to the cab and complete front wrap was removed as well as the bed from there all metal was fixed with new metal and then the truck was undercoated all the way up.the bed steps was near perfect and rust free as well as the bed sides.1 bed side HAD a dime size spot of rust and that was cut out and new metal added.fenders on front was near perfect and rust free and then the truck was sprayed with (duplicolor liner next thing to rhino)on the floor pan and on the bed sides all work was done by a proffessional body man at a shop not home built junk.this truck has 144 K actual 3 owner miles Including me.this was not a junker to start with I just updated It with new parts to fit my tastes the seat was recovered at 1 time over the years floor was good except 1 small spot on driver side which was cut out and new metal added as well.Also the truck had new metal cab support covers,the originals has a couple small rust spot In them so we replaced them.Interior has been all repainted with a gumetal grey color.original was the off gold color the grey Is much nicer.this pretty much sums the truck up and All It's new parts but I may of forgot a small new part will have to think.NO Tire Kickers apply this IS NOT A JUNKER It's fresh new and ready to cruise.I would not be 1 bit afraid to jump In this truck and drive It right to california It's that good.reason for sale Is that I'am thinking of moving to south missouri and I need to get rid of a few cars,I own 11 they are 2- 70 chevy chevelles 3-71 chevy chevelles (I will sale 3 of these as a package for 6500 FIRM).,77 chevy shortbed fleetside needs restored but has 35 K on new target engine will take 1200 On It,80gmc longbed restored for sale,@ 2500 Is all on It.86 gmc work truck 1/2 ton 1000 On It. 81 chevy shortbed fleetside work truck but nice.76 chevy vega spirit sale pending On It as well. thanks remember no tire kickers e-mail for pics of the 67 If your a serious buyer.Thanks

Hi I forgot to add:

the truck also has new door lock cyclinders and prawls and new door lock gaskets and door handle gaskets and new door mirror and new Inside mirror and I took mirror arm apart and restored It as well.as well as all new carrier bearing and new universal joints and new u bolts on the yoke.New billet door lock knobs and billet aluminium shifter handle and new speedomoeter cable.

I have 11 vehicles total and I have 8 Others for sale I have collected stuff up over the years.3 more trucks for sale they are 1980 GMC 1/2 ton restored for 2500 Or best offer,1986 GMC longbed 1/2 ton worktruck 1000 needs work to run but loaded,or offer will part out for this money,1977 chevy shortbed fleetside 1/2 ton with 35 K on target 350 for 1200 Or offer needs restored.and some minor mechanical things.got 3 chevelles as a package deal for sale the yare 1,70 and 2 ,71's for 6500 FIRM,got another 70 chevelle thats 80 % restored for 6500 firm with 355 engine,drivetrains done all new as well as brakes needs minor body work and Interior work runs real nice and hard.76 spirit Of america vega needs restored ran good when parked has nice options with 85 K miles 1000 Firm have sold this 3 times on Internet and buyers never followed through with sending money.serious replys only thanks.

[JDL]

Where at in Mo

[72shorty]

What's a 350 Target engine? Also, what else does the truck need mechanically? Is the engine sound and complete?

Thanks!

[Tony Stewart]

I live In st.Joseph which Is 50 miles due north of kansas city.

[Tony Stewart]

a 350 target engine Is an engine that was offered a couple years ago through sears only they were pricey like 1400 a pop.they are moreless a well built 355 chevy you know a 350 with standrd bore .30 over to clean cyclinders of all burs before reassembly.It runs really hard like I had It up to 100mph In a city block testing the truck before I bought It.If your reffering to the 77 chevy shorted It needs nothing mechainally except for distributor dropped back In and firing order ran and a set of points.I simply pulled distributor to use for the 67 shortbed thats paint ready for sale.