Windows do not line up, please help? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10CONFUSED82 · 08-17-2015, 10:42 PM

My 82 C10 windows had bad rubber seals around the windows, so I replaced them all on the two windows. Also the glass was not lining up also when I rolled the windows up. I am still having the same issue after replacing the window rubbers all the way around. When I roll up the window the glass always stays out of the tracks, I have to hold in place will rolling up the glass to make sure that it falls into the channels. Any clues guys as to what I need to do to fix this?

**old Rusty C10** · 08-17-2015, 10:52 PM

ar all the rollers in the tracks inside the door

C10CONFUSED82 · 08-17-2015, 11:00 PM

Quote:

Originally Posted by old Rusty C10

ar all the rollers in the tracks inside the door

From what I can see yes. Track on the left and right inside. Just when the window starts getting rolled up. It never meets with the track that is on the vent side. Just stays out of the track so window is rolls all the way up out side the vent side channel. Unless I roll it up and guided with one hand to stay on track.
Posted via Mobile Device

motornut · 08-18-2015, 10:35 AM

I've seen the regulator bolts need adjustment to seal at the top,but yours sounds right out

08-17-2015, 10:42 PM	#1
C10CONFUSED82 Registered User Join Date: Aug 2015 Location: Nashville, TN Posts: 49	Windows do not line up, please help? My 82 C10 windows had bad rubber seals around the windows, so I replaced them all on the two windows. Also the glass was not lining up also when I rolled the windows up. I am still having the same issue after replacing the window rubbers all the way around. When I roll up the window the glass always stays out of the tracks, I have to hold in place will rolling up the glass to make sure that it falls into the channels. Any clues guys as to what I need to do to fix this?

08-17-2015, 10:52 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: Windows do not line up, please help? ar all the rollers in the tracks inside the door __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-18-2015, 10:35 AM	#4
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Windows do not line up, please help? I've seen the regulator bolts need adjustment to seal at the top,but yours sounds right out __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.