TX Parting out a 3/4 ton 1970 GMC super - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HSRACER · 09-09-2015, 10:00 AM

I have a GMC super that I am parting out. Anything large will have to be a local pickup as I am not in a position to ship large items. the truck is an AC cab, had a small block in it, automatic, power steering, large Dayna rear differential, tool box in the side of the bed, and power brakes.

THE CAB ROOF AND A PILLARS IS THE WORST ONE I HAVE EVER SEEN! I will probably cut up the cab so let me know what you may need here and I will check if it is any good.

Let me know what you might need and I will determine if it is still available.

Thanks for looking.

HSRACER · 09-09-2015, 10:01 AM

Bed pic

HSRACER · 09-09-2015, 10:02 AM

engine bay

HSRACER · 09-09-2015, 10:03 AM

Dash

**gmc 2500 4x4** · 09-09-2015, 10:57 AM

interested in front grill and eye brows, need a front pic

**68350** · 09-09-2015, 11:01 AM

Is the tool box door rusty? How about the deluxe markers, how much?

**68350** · 09-09-2015, 11:02 AM

I'm also interested in the mirrors if unbroken

54blackhornet · 09-09-2015, 11:02 AM

Can I get the black sun visor clips ? Thanks...Jack

Jamiem753 · 09-09-2015, 12:01 PM

How much for the booster master cylinder and rod from petal to booster?

**1968k20** · 09-09-2015, 12:28 PM

Second inline for eyebrows

**6t727t2** · 09-09-2015, 01:20 PM

In line for the toolbox door.

72kool · 09-09-2015, 03:08 PM

what transmission is in it? how much for the flexplate dust shield shipped to 68949? also what price for the wheels?

1old68 · 09-09-2015, 03:39 PM

If it's a dana 60 posi I'm interested in the internals.

Sluggo · 09-09-2015, 04:43 PM

How much for the entire dash assembly, i can pick it up

HSRACER · 09-09-2015, 09:58 PM

Quote:

Originally Posted by gmc 2500 4x4

interested in front grill and eye brows, need a front pic

I have a drivers side eyebrow only. The passenger was sold today. The grill has rust on it down low. It is straight but is rusty. I sold the eye brow for 30 so I will sell the drivers side for the same plus shipping.lMK.

I will upload a picture from my computer

HSRACER · 09-09-2015, 10:16 PM

Quote:

Originally Posted by 68350

I'm also interested in the mirrors if unbroken

Mirrors are unbroken. 50 plus shipping. LMK

HSRACER · 09-09-2015, 10:17 PM

Quote:

Originally Posted by Sluggo

How much for the entire dash assembly, i can pick it up

$125 Radio hole has been cut for modern radio. LMK

HSRACER · 09-09-2015, 10:18 PM

Quote:

Originally Posted by 1old68

If it's a dana 60 posi I'm interested in the internals.

I will only sell this complete, and local pick up only. Thanks

HSRACER · 09-09-2015, 10:20 PM

Quote:

Originally Posted by 72kool

what transmission is in it? how much for the flexplate dust shield shipped to 68949? also what price for the wheels?

350 trans, I haven't seen a dust shield for it yet. I will look closer in the morning. Wheels are very nice and only 1 year old. They are for sale for 450 local pickup only.

HSRACER · 09-09-2015, 10:24 PM

Quote:

Originally Posted by gmc 2500 4x4

interested in front grill and eye brows, need a front pic

here is a couple of pics

HSRACER · 09-09-2015, 10:29 PM

Quote:

Originally Posted by Jamiem753

How much for the booster master cylinder and rod from petal to booster?

THIS IS A DRUM BRAKE TRUCK JUST TO MAKE SURE YOU ARE AWARE OF THAT. Sorry for the caps I must have hit it.

Firewall Brackets, booster, master cylinder, and rod will be 140 plus shipping. LMK

HSRACER · 09-09-2015, 10:30 PM

Quote:

Originally Posted by 54blackhornet

Can I get the black sun visor clips ? Thanks...Jack

They sold already, sorry

HSRACER · 09-09-2015, 10:34 PM

Quote:

Originally Posted by 68350

Is the tool box door rusty? How about the deluxe markers, how much?

The access door has bubbles on it so it is not rust free. I have had 3 others and they were all much worse. Here is a closer picture. I will ask 75 plus the ride. It will come with the hinge, lock assembly, (no key) latch, and stop. LMK

HSRACER · 09-09-2015, 10:36 PM

Quote:

Originally Posted by 6t727t2

In line for the toolbox door.

See pictures and description

REEDS 72 · 09-09-2015, 10:53 PM

Tail light harness cond splices/cuts some up close pictures and price thank you shipping will be 84003.

09-09-2015, 10:00 AM	#1
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Parting out a 3/4 ton 1970 GMC super I have a GMC super that I am parting out. Anything large will have to be a local pickup as I am not in a position to ship large items. the truck is an AC cab, had a small block in it, automatic, power steering, large Dayna rear differential, tool box in the side of the bed, and power brakes. THE CAB ROOF AND A PILLARS IS THE WORST ONE I HAVE EVER SEEN! I will probably cut up the cab so let me know what you may need here and I will check if it is any good. Let me know what you might need and I will determine if it is still available. Thanks for looking. Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS Last edited by HSRACER; 09-09-2015 at 10:58 PM.

09-09-2015, 10:01 AM	#2
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Parting out a 3/4 ton 1970 GMC super Bed pic Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

09-09-2015, 10:02 AM	#3
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Parting out a 3/4 ton 1970 GMC super engine bay Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

09-09-2015, 10:03 AM	#4
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Parting out a 3/4 ton 1970 GMC super Dash Attached Images __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

09-09-2015, 10:57 AM	#5
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: Parting out a 3/4 ton 1970 GMC super interested in front grill and eye brows, need a front pic

09-09-2015, 11:01 AM	#6
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out a 3/4 ton 1970 GMC super Is the tool box door rusty? How about the deluxe markers, how much? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-09-2015, 11:02 AM	#7
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out a 3/4 ton 1970 GMC super I'm also interested in the mirrors if unbroken __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-09-2015, 11:02 AM	#8
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,393	Re: Parting out a 3/4 ton 1970 GMC super Can I get the black sun visor clips ? Thanks...Jack __________________ 71 C-20 07 Magnum RT AWD

09-09-2015, 12:01 PM	#9
Jamiem753 Registered User Join Date: Oct 2014 Location: Annandale, NJ Posts: 33	Re: Parting out a 3/4 ton 1970 GMC super How much for the booster master cylinder and rod from petal to booster?

09-09-2015, 12:28 PM	#10
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Parting out a 3/4 ton 1970 GMC super Second inline for eyebrows

09-09-2015, 01:20 PM	#11
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,458	Re: Parting out a 3/4 ton 1970 GMC super In line for the toolbox door.

09-09-2015, 03:08 PM	#12
72kool Registered User Join Date: Dec 2012 Location: kearney nebraska Posts: 613	Re: Parting out a 3/4 ton 1970 GMC super what transmission is in it? how much for the flexplate dust shield shipped to 68949? also what price for the wheels?

09-09-2015, 03:39 PM	#13
1old68 Registered User Join Date: Jan 2012 Location: new berlin wi Posts: 22	Re: Parting out a 3/4 ton 1970 GMC super If it's a dana 60 posi I'm interested in the internals.

09-09-2015, 04:43 PM	#14
Sluggo Registered User Join Date: Apr 2015 Location: Santa Fe, Tx Posts: 50	Re: Parting out a 3/4 ton 1970 GMC super How much for the entire dash assembly, i can pick it up

09-09-2015, 10:53 PM	#25
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parting out a 3/4 ton 1970 GMC super Tail light harness cond splices/cuts some up close pictures and price thank you shipping will be 84003.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.