Blood, Sweat, and Curses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JSF3RD · 10-20-2015, 08:59 PM

Well, I've been lurking long enough and am finally digging into my 67 C-10 SWB/Fleetside.

It was my first vehicle back in high school, but it broke down six years ago, and has been sitting in my mother's pasture since.

Anyway, time to get to it.

JSF3RD · 10-20-2015, 09:31 PM

I'm sure that'll buff out.

flashed · 10-20-2015, 10:11 PM

So when are you going to rescue it and what are your plans .

JSF3RD · 10-20-2015, 10:26 PM

It's out and moved to my driveway.

Pics are a little slow cuz they take forever to upload.

First I need to get it running so the city can't call it a junk car.
Obviously have some body work.
Gonna lower it, just haven't decided how much.
Relocate the gas tank.
Full disk brakes (the drums are why that fender is crumpled)
And a whole lot of rust removal/ fixing the PO's cheap fixes from the '90s.

Due to funding and work space restrictions this should be interesting.

JSF3RD · 10-20-2015, 10:31 PM

After an hour of bushwacking and 3 cans of hornet spray.

JSF3RD · 10-20-2015, 10:34 PM

I was amazed how well the interior looked.

The bench looks about the same as when I got it. Used to have a cover but it rotted off.

**68bowtie** · 10-20-2015, 10:53 PM

originally a 327/powerglide by chance?

JSF3RD · 10-20-2015, 11:25 PM

Originally it was I6 and 3 OTT.

When I bought it in 2002 it was 327/ 3 OTT.

now its 350/ 3 on the floor.

And that 3speed's days are numbered.

Allegedly the owner before the PO swaped the rear end but who knows at this point.

WarMonger · 10-21-2015, 04:38 PM

Looks good. Can't wait to see the progress. Are you going to just fix it up, or do some lifting/lowering/motor swapp'n stuff?

JSF3RD · 10-21-2015, 08:37 PM

It's gonna be slow, but it will be a full restoration and some custom stuff. Maybe a BBC/T56 down the road.

All my funding is coming from donating plasma. Thus the "blood" in the title.

Xeen · 10-21-2015, 08:45 PM

Quote:

Originally Posted by JSF3RD

I'm sure that'll buff out.

Okay that cracked me up.
It sounds like you have some history with the pickup which makes it even more interesting to me so I'm subscribing.
You might want to yank the front clip and eyeball the frame and see if it looks like it got bent when you wrecked it.

JSF3RD · 10-21-2015, 08:51 PM

Damage assessment.

The front bumper and supports are toast.
So are radiator support
right fender and wheel well
gas tank is a cave of rust
front brakes are rusted shut
master cylinder might be salvageable but I want to go to full disk
rockers need to go
cab corners might just need a patch
Probably need new hood and tailgate

I'm sure there's more hidden in there

So let the fun (and cursing) begin.

JSF3RD · 10-21-2015, 08:59 PM

Does anyone know the part number for that piece of string holding in the battery.

It might need a new one.

JSF3RD · 10-21-2015, 09:03 PM

Not sure why those are sideways.

And the grand total of my work space.

Xeen · 10-21-2015, 09:44 PM

Get yourself a Imgur account that way you can manage your photos easier and have more options.
http://imgur.com/

JSF3RD · 10-21-2015, 10:24 PM

I switched which phone I'm using for pictures.

One needed to be upright, and I think the other one needs to be sideways. If that doesn't work I'll try that.

And I checked all the measurements on the frame to make sure it wasn't bent.

JSF3RD · 10-22-2015, 05:51 PM

Got the old farm bumper off the back.

Best news yet, after six years of sitting the engine still has a full pan of oil. Yay.
Spark plugs came out, marvel mystery oil went in. A week or so of that and we'll see if I can turn the engine by hand.

Made sure to label all the plug wires this time. When I swaped in the engine years ago it never occurred to me that I wouldn't remember the order of the top of my head. No teacher like experience.

JSF3RD · 10-22-2015, 05:53 PM

Yay. Pictures aren't sideways anymore.

JSF3RD · 10-25-2015, 01:21 AM

Doing some planning while my funds build up again.

I decided that I am going to get the ECE 4/6 drop kit and switch to a full disc brake setup.

What I'm still debating is 20" or 18" wheels. I know the 18" will let me run a little taller wall tire, but with this drop how big can I go on each without rubbing the wheel well?
I tried searching but the 20"s I saw look like they're running low-pro tires, and that's not my style.
Maybe something will just grab my attention.

Does the ECE kit take care of the typical fitment issues for newer wheels, or am I still going to need spacers and all that PITA?

So far, these are in the lead. 20x8.5, 6 lug.

**nlped** · 10-25-2015, 09:36 AM

Quote:

Originally Posted by JSF3RD

Does anyone know the part number for that piece of string holding in the battery.

It might need a new one.

That cracked me up!!! I'm in.

JSF3RD · 10-25-2015, 11:49 PM

My wife (who knows nothing about mechanics) looked under the hood today.

Her "Is that the engine? It looks so little."

Me "So, you're saying I need a bigger engine? I'll get right on that."

GTSideSwipe · 10-26-2015, 02:54 AM

Quote:

Originally Posted by JSF3RD

My wife (who knows nothing about mechanics) looked under the hood today.

Her "Is that the engine? It looks so little."

Me "So, you're saying I need a bigger engine? I'll get right on that."

Lol that's pretty funny dude. Looks like a really fun project.

About your wheels options, it really depends on how much you plan on lowering it.

I attached a image of my stock C20. It has 20 inch rims with 31 inch tires and I rub the wheel wells every time I pull into my driveway. If I'm turning to the right the wheel rubs the power steering gearbox. My driveway is pretty stupid though. One of these days I am going to go over to these.

http://m.summitracing.com/parts/aew-0589-7888

JSF3RD · 10-26-2015, 03:02 AM

Your tire size is about the look I'm wanting. Just not sure if I can do it in a 20". Do you have room to space them further out in the wheel well or is that it?

GTSideSwipe · 10-26-2015, 03:12 AM

Quote:

Originally Posted by JSF3RD

Your tire size is about the look I'm wanting. Just not sure if I can do it in a 20". Do you have room to space them further out in the wheel well or is that it?

Sadly if I try to add a spacer I will have to remove the fenders and wheel wells xD.

How much are you thinking of lowering yours?

JSF3RD · 10-26-2015, 03:40 AM

Planning on the ECE 4/6 static drop kit and full disk swap.

10-20-2015, 08:59 PM	#1
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Blood, Sweat, and Curses Well, I've been lurking long enough and am finally digging into my 67 C-10 SWB/Fleetside. It was my first vehicle back in high school, but it broke down six years ago, and has been sitting in my mother's pasture since. Anyway, time to get to it.

10-20-2015, 09:31 PM	#2
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses I'm sure that'll buff out. Attached Images

10-20-2015, 10:11 PM	#3
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Blood, Sweat, and Curses So when are you going to rescue it and what are your plans .

10-20-2015, 10:26 PM	#4
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses It's out and moved to my driveway. Pics are a little slow cuz they take forever to upload. First I need to get it running so the city can't call it a junk car. Obviously have some body work. Gonna lower it, just haven't decided how much. Relocate the gas tank. Full disk brakes (the drums are why that fender is crumpled) And a whole lot of rust removal/ fixing the PO's cheap fixes from the '90s. Due to funding and work space restrictions this should be interesting.

10-20-2015, 10:31 PM	#5
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses After an hour of bushwacking and 3 cans of hornet spray. Attached Images

10-20-2015, 10:34 PM	#6
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses I was amazed how well the interior looked. The bench looks about the same as when I got it. Used to have a cover but it rotted off.

10-20-2015, 10:53 PM	#7
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,822	Re: Blood, Sweat, and Curses originally a 327/powerglide by chance? __________________ Project "C10 Fever" (68 factory black 396 swb) Project “Faded Glory” (71 c10 med bronze original paint refresh) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

10-20-2015, 11:25 PM	#8
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Originally it was I6 and 3 OTT. When I bought it in 2002 it was 327/ 3 OTT. now its 350/ 3 on the floor. And that 3speed's days are numbered. Allegedly the owner before the PO swaped the rear end but who knows at this point.

10-21-2015, 04:38 PM	#9
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: Blood, Sweat, and Curses Looks good. Can't wait to see the progress. Are you going to just fix it up, or do some lifting/lowering/motor swapp'n stuff? __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

10-21-2015, 08:37 PM	#10
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses It's gonna be slow, but it will be a full restoration and some custom stuff. Maybe a BBC/T56 down the road. All my funding is coming from donating plasma. Thus the "blood" in the title.

10-21-2015, 08:51 PM	#12
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Damage assessment. The front bumper and supports are toast. So are radiator support right fender and wheel well gas tank is a cave of rust front brakes are rusted shut master cylinder might be salvageable but I want to go to full disk rockers need to go cab corners might just need a patch Probably need new hood and tailgate I'm sure there's more hidden in there So let the fun (and cursing) begin.

10-21-2015, 08:59 PM	#13
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Does anyone know the part number for that piece of string holding in the battery. It might need a new one. Attached Images

10-21-2015, 09:03 PM	#14
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Not sure why those are sideways. And the grand total of my work space. Attached Images

10-21-2015, 09:44 PM	#15
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: Blood, Sweat, and Curses Get yourself a Imgur account that way you can manage your photos easier and have more options. http://imgur.com/ __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

10-21-2015, 10:24 PM	#16
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses I switched which phone I'm using for pictures. One needed to be upright, and I think the other one needs to be sideways. If that doesn't work I'll try that. And I checked all the measurements on the frame to make sure it wasn't bent.



Register or Log In To remove these advertisements.

10-22-2015, 05:51 PM	#17
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Got the old farm bumper off the back. Best news yet, after six years of sitting the engine still has a full pan of oil. Yay. Spark plugs came out, marvel mystery oil went in. A week or so of that and we'll see if I can turn the engine by hand. Made sure to label all the plug wires this time. When I swaped in the engine years ago it never occurred to me that I wouldn't remember the order of the top of my head. No teacher like experience. Attached Images

10-22-2015, 05:53 PM	#18
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Yay. Pictures aren't sideways anymore.

10-25-2015, 01:21 AM	#19
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Doing some planning while my funds build up again. I decided that I am going to get the ECE 4/6 drop kit and switch to a full disc brake setup. What I'm still debating is 20" or 18" wheels. I know the 18" will let me run a little taller wall tire, but with this drop how big can I go on each without rubbing the wheel well? I tried searching but the 20"s I saw look like they're running low-pro tires, and that's not my style. Maybe something will just grab my attention. Does the ECE kit take care of the typical fitment issues for newer wheels, or am I still going to need spacers and all that PITA? So far, these are in the lead. 20x8.5, 6 lug. Attached Images

10-25-2015, 11:49 PM	#21
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses My wife (who knows nothing about mechanics) looked under the hood today. Her "Is that the engine? It looks so little." Me "So, you're saying I need a bigger engine? I'll get right on that."

10-26-2015, 03:02 AM	#23
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Your tire size is about the look I'm wanting. Just not sure if I can do it in a 20". Do you have room to space them further out in the wheel well or is that it?

10-26-2015, 03:40 AM	#25
JSF3RD Registered User Join Date: Oct 2015 Location: Fort Worth, TX Posts: 46	Re: Blood, Sweat, and Curses Planning on the ECE 4/6 static drop kit and full disk swap.

Register or Log In To remove these advertisements.