TX 3OTT could be yours - The 1947 - Present Chevrolet & GMC Truck Message Board Network

9teen69 · 11-10-2015, 06:57 PM

I know you been wanting one

3 speed on the column, removed from 72 Cheyenne, worked great when removed. Like to sell complete, but will part out after 24 hours.

$150 local pickup

**1968k20** · 11-10-2015, 08:58 PM

If you part out, I would be interested in the column shipped to Ca please

DeepOceanStepside · 11-10-2015, 10:11 PM

If you part it out...I'll buy all the shifter linkage. And I will get in line for the column.

kda2000 · 11-11-2015, 01:49 PM

Looks like this is from a V8 -- I would like the complete clutch linkage setup (if you sell separately). Thanks, Ken

9teen69 · 11-11-2015, 04:56 PM

Let's separate... All - what is your zip? I'll find boxes to ship, I have to work all weekend so it might take a little longer to get column boxed.
1968k20 - $30 plus shipping?, the column does not have shaft, had to use on my new auto column. Do you need any levers?
DeepOceanStepside - What all do you need?
kda2000 - What all do you need?

**1968k20** · 11-11-2015, 07:07 PM

Sounds good $30 plus ship. Yes on the levers. Thank you.

9teen69 · 11-11-2015, 09:29 PM

Quote:

Originally Posted by 1968k20

Sounds good $30 plus ship. Yes on the levers. Thank you.

Hopefully I can find a box tomorrow at work. Also wanted to show the lower clamp end that folds over is broken. Didn't affect the operation.

DeepOceanStepside · 11-11-2015, 11:45 PM

I need all of the linkage and pins for the shifter between the column and the trans. My truck was converted to a floor shift and I would like to put it back. Shipped to 48609.. just pm me.

kda2000 · 11-12-2015, 12:32 PM

I need the Zbar, and the two rods that attach to it, the mounting plate and bolts that attaches to the engine block, the return spring, and nuts, washers and pivot for the Zbar where it attaches to the frame. Let me know what your price asking is. I see your in the Austin area as well, depending on location I could pick them up and save the shipping costs and hassle if you want. Since your close I 'm interested in the cross member as well, depending on price. Thanks, Ken

9teen69 · 11-12-2015, 07:47 PM

Quote:

Originally Posted by DeepOceanStepside

I need all of the linkage and pins for the shifter between the column and the trans. My truck was converted to a floor shift and I would like to put it back. Shipped to 48609.. just pm me.

Do you need more than what is in photo - two rods and 2 compression nuts ?
If not, $40 plus shipping

kda2000 - If D.O.S. doesn't need anything else. He gets first dibs. The items in the second photo are $60 plus ship. $15 for crossmember. I'm far south Austin and work south end of airport.

9teen69 · 11-14-2015, 12:24 AM

Are you still interested?

DeepOceanStepside · 11-15-2015, 10:15 PM

Quote:

Originally Posted by 9teen69

Are you still interested?

$40 shipped to 48609 for the two shifter linkages? Also did the column sell?

**JimH2828** · 11-16-2015, 10:01 AM

How much for the top\bottom rubber mounts and 6 large bolts shipped to GA 30005? I would grab then for backups if price is right.

9teen69 · 11-16-2015, 03:24 PM

Quote:

Originally Posted by DeepOceanStepside

$40 shipped to 48609 for the two shifter linkages? Also did the column sell?

Sorry can't do that the box will be too big. Column is sold.

9teen69 · 11-16-2015, 03:26 PM

Quote:

Originally Posted by JimH2828

How much for the top\bottom rubber mounts and 6 large bolts shipped to GA 30005? I would grab then for backups if price is right.

$10 plus ship, I'll get price for shipping when I go to PO this evening or I can put in USPS medium flat rate of $11.30

9teen69 · 11-16-2015, 03:44 PM

1968k20 you are next in line if DOS passes.

9teen69 · 11-16-2015, 04:08 PM

Quote:

Originally Posted by JimH2828

How much for the top\bottom rubber mounts and 6 large bolts shipped to GA 30005? I would grab then for backups if price is right.

Online USPS calculator shows $15.32. Flat rate is cheaper . $21.30 would be your total .

**JimH2828** · 11-16-2015, 04:12 PM

$21.30 works for me, please send PM for payment.

9teen69 · 11-16-2015, 05:18 PM

JIMh2828- Payment received, box and will drop off tonight. thank you!

DeepOceanStepside- $15.45 for ship, $55.45 total. box is 6x6x30

1968k20- Column boxed and ready to go. $27.82 for ship, $57.82 total.

**1968k20** · 11-16-2015, 08:14 PM

Paypal sent for column with shipping address. Thank you!

9teen69 · 11-17-2015, 10:12 AM

1968k20- PP received- thanks!, I'll ship at lunch today and send tracking info.

DeepOceanStepside- Linkage arms sold pending payment

Z-bar and other clutch items still available - $75 shipped

thanks for the interest!

DeepOceanStepside · 11-17-2015, 06:26 PM

Ill take the linkages...thanks

9teen69 · 11-18-2015, 05:38 PM

1968k20 & D.O.S. Packages shipped
Thanks again!

**JimH2828** · 11-18-2015, 06:51 PM

Quote:

Originally Posted by 9teen69

JIMh2828- Payment received, box and will drop off tonight. thank you!

DeepOceanStepside- $15.45 for ship, $55.45 total. box is 6x6x30

1968k20- Column boxed and ready to go. $27.82 for ship, $57.82 total.

Parts arrived today, look good.

Thanks
Jim

kda2000 · 11-19-2015, 08:09 PM

It looks like D.O.S. didn't need the clutch linkage -- so if its still available? $60 + $15 for the cross member -- that would be OK.

I live off 1826 in southwest Austin, and work near I35 and Ben White -- close to you on both accounts -- so we should meet and save the shipping -- PM me with a suggested time and place. Lunch time near your work, or over the weekend I can come over and pick it up, either is OK. Thanks, Ken

11-10-2015, 06:57 PM	#1
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	3OTT could be yours I know you been wanting one 3 speed on the column, removed from 72 Cheyenne, worked great when removed. Like to sell complete, but will part out after 24 hours. $150 local pickup Attached Images __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-10-2015, 08:58 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 3OTT could be yours If you part out, I would be interested in the column shipped to Ca please

11-10-2015, 10:11 PM	#3
DeepOceanStepside Registered User Join Date: Sep 2015 Location: Saginaw, MI Posts: 139	Re: 3OTT could be yours If you part it out...I'll buy all the shifter linkage. And I will get in line for the column. __________________ 1970 Base Step Side Dark Olive 250 3ott restoration 1972 k5 4x4 250 3ott project 1970 long bed light olive 283 th350 driver SOLD

11-11-2015, 01:49 PM	#4
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: 3OTT could be yours Looks like this is from a V8 -- I would like the complete clutch linkage setup (if you sell separately). Thanks, Ken

11-11-2015, 04:56 PM	#5
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours Let's separate... All - what is your zip? I'll find boxes to ship, I have to work all weekend so it might take a little longer to get column boxed. 1968k20 - $30 plus shipping?, the column does not have shaft, had to use on my new auto column. Do you need any levers? DeepOceanStepside - What all do you need? kda2000 - What all do you need? __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-11-2015, 07:07 PM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 3OTT could be yours Sounds good $30 plus ship. Yes on the levers. Thank you.

11-11-2015, 11:45 PM	#8
DeepOceanStepside Registered User Join Date: Sep 2015 Location: Saginaw, MI Posts: 139	Re: 3OTT could be yours I need all of the linkage and pins for the shifter between the column and the trans. My truck was converted to a floor shift and I would like to put it back. Shipped to 48609.. just pm me. __________________ 1970 Base Step Side Dark Olive 250 3ott restoration 1972 k5 4x4 250 3ott project 1970 long bed light olive 283 th350 driver SOLD

11-12-2015, 12:32 PM	#9
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: 3OTT could be yours I need the Zbar, and the two rods that attach to it, the mounting plate and bolts that attaches to the engine block, the return spring, and nuts, washers and pivot for the Zbar where it attaches to the frame. Let me know what your price asking is. I see your in the Austin area as well, depending on location I could pick them up and save the shipping costs and hassle if you want. Since your close I 'm interested in the cross member as well, depending on price. Thanks, Ken

11-14-2015, 12:24 AM	#11
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours Are you still interested? __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-16-2015, 10:01 AM	#13
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 3OTT could be yours How much for the top\bottom rubber mounts and 6 large bolts shipped to GA 30005? I would grab then for backups if price is right.

11-16-2015, 03:44 PM	#16
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours 1968k20 you are next in line if DOS passes. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-16-2015, 04:12 PM	#18
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 3OTT could be yours $21.30 works for me, please send PM for payment.

11-16-2015, 05:18 PM	#19
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours JIMh2828- Payment received, box and will drop off tonight. thank you! DeepOceanStepside- $15.45 for ship, $55.45 total. box is 6x6x30 1968k20- Column boxed and ready to go. $27.82 for ship, $57.82 total. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-16-2015, 08:14 PM	#20
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 3OTT could be yours Paypal sent for column with shipping address. Thank you!

11-17-2015, 10:12 AM	#21
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours 1968k20- PP received- thanks!, I'll ship at lunch today and send tracking info. DeepOceanStepside- Linkage arms sold pending payment Z-bar and other clutch items still available - $75 shipped thanks for the interest! __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)



Register or Log In To remove these advertisements.

11-17-2015, 06:26 PM	#22
DeepOceanStepside Registered User Join Date: Sep 2015 Location: Saginaw, MI Posts: 139	Re: 3OTT could be yours Ill take the linkages...thanks __________________ 1970 Base Step Side Dark Olive 250 3ott restoration 1972 k5 4x4 250 3ott project 1970 long bed light olive 283 th350 driver SOLD

11-18-2015, 05:38 PM	#23
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 3OTT could be yours 1968k20 & D.O.S. Packages shipped Thanks again! __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

11-19-2015, 08:09 PM	#25
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: 3OTT could be yours It looks like D.O.S. didn't need the clutch linkage -- so if its still available? $60 + $15 for the cross member -- that would be OK. I live off 1826 in southwest Austin, and work near I35 and Ben White -- close to you on both accounts -- so we should meet and save the shipping -- PM me with a suggested time and place. Lunch time near your work, or over the weekend I can come over and pick it up, either is OK. Thanks, Ken

Register or Log In To remove these advertisements.