cab, bed & core support mounts

[tucker69]

I have tried searching for my answer for 2 days. Now keep in mind I am not the sharpest knife in the drawer when it comes to computers. here's my problem, I purchased part#GMK-4143392691S FRAME MOUNT KIT FROM GOODMARK, THIS IS THE 82PC. MOUNT, WASHER BOLT, KIT.
THERE IS NO DIRECTION/SPEC SHEET IN BOX, I CALLED GOODMARK, THEY SIAD THEY DON'T HAVE INFO AS TO WHICH MOUNT GOES WHERE. THEY SAID I SHOULD BUY A "SERVICE MANUAL". I HAVE A SERVICE MANUAL I PURCHASED FROM THIS SITE, HOWEVER ALL THE PAGES ARE SO COPIED/BLURRED THAT I CAN'T MAKEOUT WHICH MOUNT GOES WHERE. MOST OF ALL THE RUBBER WAS GONE ON DISASSEMBLY. SO WHAT I NEED HELP WITHIS, WHERE DOES BUSHING/MOUNTS AND WASHERS GO IN THE ABOVE KIT? IF NEEDED I CAN TAKE PICTURES OF MY MOUNTS...THANKS FOR ANY HELP.

[Grumpy old man]

Here you go this should help .

http://67-72chevytrucks.com/vboard/s....php?p=7362578

[toolboxchev]

Grumpy and all the other folks here are very helpful, some of that stuff you can buy at the everyday stores.

Let me look a little further...

Also from what I remember there are two different kits, 3/4 and 1/2 ton. The mounts on the frame and or bushings may be different.

[tucker69]

Thanks Grumpy, you are a life saver. That was exactly what I was looking for. As I have said before " I am a 98 year old, trapped in a 48 year old body...I would rather sit in a dentist chair for a dual root canal while some Japanese ninja pushes bamboo slits up my finger nails than get on a computer...I realize I am in the minority here...I realize than when everything goes right..(i.e. computer, modem, connections, internet, phone lines, etc) it is so much easier and more informative than picking up the phone or going to the library. BUT...BUT...BUT, its never that easy when I am doing it.. anyway, thank for your assistance

[Grumpy old man]

Remember when you could walk into an auto parts shop (they weren't called stores) and the guy behind the counter not only knew what part you needed he also knew where it was in his shop and how to install it correctly . and most of them carried S&K tools to do the job .Not Chinese CR@p ! NO computer required !

[toolboxchev]

Originally Posted by Grumpy old man

Remember when you could walk into an auto parts shop (they weren't called stores) and the guy behind the counter not only knew what part you needed he also knew where it was in his shop and how to install it correctly . and most of them carried S&K tools to do the job .Not Chinese CR@p ! NO computer required !

AMEN!

Blessed are those that know the truth!

[GASoline71]

I miss the big long bunch of parts books and catalogs that were bound together behind the counter. The good old days...

Gary

[Blown06]

Originally Posted by GASoline71

I miss the big long bunch of parts books and catalogs that were bound together behind the counter. The good old days...

Gary

I've spent a lot of hours on a stool at a parts counter having parts looked up. In some ways I miss it but it's sure hard to beat ordering parts late at night from the recliner and tablet.

[Clavo106]

I own over 300+ manuals and parts manuals douse it take up room.yes! and do i look at them no not really.. and do I have one for a 67 -72 c10 no I do not! is it convenient no but its shure nice to know I have them.. pros and cons.

[tucker69]

alright guys maybe I was wrong when I said I was in the minority.... I miss the "good ole days"..thanks everyone

[mmiddle]

Tucker: save all of your old washers and spacers... you may need them to get everything to line up correctly.

Grumpy: You beat me to my own post... thank you. I spent several hours searching for that stupid picture last month

[Grumpy old man]

Originally Posted by mmiddle

Tucker: save all of your old washers and spacers... you may need them to get everything to line up correctly.

Grumpy: You beat me to my own post... thank you. I spent several hours searching for that stupid picture last month

Hey , I book marked it a while back . I've worked on hundreds of these trucks and build my own now and I can't remember everything and have to look things up again myself and when you find good info you keep it .

[mmiddle]

Stuff like this I print it out and file it in the "Specs and other info" file. I'm like you, I know a lot but can't remember it all.