K20 Lockout ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Cheyenne K20 · 12-04-2015, 11:52 PM

I have a 71 K20 with after market lockouts and wanted to ask if anyone knows if 67/68 factory lockouts can work as a direct fit / replacement on a 71. I like the look of the all metal lockout and it would give a matching look to the HO52.

Thanks, Scott

**undertaker72** · 12-05-2015, 12:06 AM

is this the style your wanting , they are on here in the for sale section from time to time

72 Cheyenne K20 · 12-05-2015, 11:57 AM

Those are for 69 and newer. The ones I'm asking about are all metal that came on 67/68 K20's. ill post a pic if I can find one.

Thanks, Scott

57taskforce · 12-05-2015, 02:44 PM

I don't believe they will work with the open knuckle axles

binnsmark · 12-06-2015, 08:21 PM

According to my research, the part numbers are the same for the replacement locking hubs from 67 thru 72 K20 trucks.

binnsmark · 12-06-2015, 08:25 PM

https://www.yukongear.com/partslist....ndard+Rotation

CrewCab59 · 12-06-2015, 08:56 PM

Quote:

Originally Posted by binnsmark

https://www.yukongear.com/partslist....ndard+Rotation

These are the internal locking hubs , these will not work.

**undertaker72** · 12-06-2015, 09:04 PM

is this the style your looking for , the old original's , I have some in 3/4 and in half ton

**special-K** · 12-07-2015, 02:18 AM

So, do the earlier hubs interchange? I couldn't say, just never considered it and assumed they were different.
Here's my all metal era-correct look:

**undertaker72** · 12-07-2015, 06:04 AM

Quote:

Originally Posted by special-K

So, do the earlier hubs interchange? I couldn't say, just never considered it and assumed they were different.
Here's my all metal era-correct look:

The old selectro hub were a very stout hub nice picture

**special-K** · 12-07-2015, 10:05 AM

I decided to run these while I go with the 9.75" aluminum slots a while. I got grade 8 allens heads, painted them black, bronze lock washers, disassembled and painted body of hub gloss black. I don't run center caps, the rear hub is gloss black,too. I've considered painting red background (originally black), but thinking just keep all chrome

57taskforce · 12-07-2015, 10:13 AM

Quote:

Originally Posted by special-K

So, do the earlier hubs interchange? I couldn't say, just never considered it and assumed they were different.
Here's my all metal era-correct look:

This was my thought as well Tim. I figured they were different but I've honestly never tried to put the old style hub on a 70-72 open knuckle.

**gmc 2500 4x4** · 03-11-2016, 10:07 AM

undertaker72 you still have these?

mike16 · 03-11-2016, 03:48 PM

this is whats on my 68 k20

**undertaker72** · 03-11-2016, 03:56 PM

Quote:

Originally Posted by gmc 2500 4x4

undertaker72 you still have these?

Yes i still have a pair

**gmc 2500 4x4** · 03-11-2016, 04:12 PM

mike16 and undertaker72 i have a wtb post as im looking for nos or really nice plates. the outer cover is what i want but would consider complete sets. i dont want to hijack this thread.

WTB nos hub retaining plate 3/4ton

12-04-2015, 11:52 PM	#1
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	K20 Lockout ? I have a 71 K20 with after market lockouts and wanted to ask if anyone knows if 67/68 factory lockouts can work as a direct fit / replacement on a 71. I like the look of the all metal lockout and it would give a matching look to the HO52. Thanks, Scott

12-05-2015, 12:06 AM	#2
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: K20 Lockout ? is this the style your wanting , they are on here in the for sale section from time to time Attached Images

12-05-2015, 11:57 AM	#3
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Re: K20 Lockout ? Those are for 69 and newer. The ones I'm asking about are all metal that came on 67/68 K20's. ill post a pic if I can find one. Thanks, Scott

12-05-2015, 02:44 PM	#4
57taskforce All about them K’s Join Date: Jun 2014 Location: Farmington, New Mexico Posts: 6,337	Re: K20 Lockout ? I don't believe they will work with the open knuckle axles __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0

12-06-2015, 08:21 PM	#5
binnsmark Registered User Join Date: Nov 2015 Location: Fort McMurray, Alberta Posts: 18	Re: K20 Lockout ? According to my research, the part numbers are the same for the replacement locking hubs from 67 thru 72 K20 trucks.

12-06-2015, 08:25 PM	#6
binnsmark Registered User Join Date: Nov 2015 Location: Fort McMurray, Alberta Posts: 18	Re: K20 Lockout ? https://www.yukongear.com/partslist....ndard+Rotation

12-06-2015, 09:04 PM	#8
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: K20 Lockout ? is this the style your looking for , the old original's , I have some in 3/4 and in half ton Attached Images

12-07-2015, 02:18 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: K20 Lockout ? So, do the earlier hubs interchange? I couldn't say, just never considered it and assumed they were different. Here's my all metal era-correct look: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-07-2015 at 02:27 AM.

12-07-2015, 10:05 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: K20 Lockout ? I decided to run these while I go with the 9.75" aluminum slots a while. I got grade 8 allens heads, painted them black, bronze lock washers, disassembled and painted body of hub gloss black. I don't run center caps, the rear hub is gloss black,too. I've considered painting red background (originally black), but thinking just keep all chrome __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-11-2016, 10:07 AM	#13
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,903	Re: K20 Lockout ? undertaker72 you still have these?

03-11-2016, 03:48 PM	#14
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	Re: K20 Lockout ? this is whats on my 68 k20 Attached Images

03-11-2016, 04:12 PM	#16
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,903	Re: K20 Lockout ? mike16 and undertaker72 i have a wtb post as im looking for nos or really nice plates. the outer cover is what i want but would consider complete sets. i dont want to hijack this thread. WTB nos hub retaining plate 3/4ton



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.