TX WTB Big Block LWP AC brackets Driver side & AC lines Axial

[WIDESIDE72]

I recently swapped a 73 454 big block out of a 73 C20 into my 79 Malibu. For simplicity's same I kept the long water pump, pulley and brackets. The truck/ engine originally had AC but it had been removed before I bought it. I am thinking of using the original brackets and hoses. From my experience all of the fitting on older GM vehicles were the same. I plan on running one of the newer r134 compatible axial compressors.

I will need all of the AC brackets (and bolts if possible) and a good set of hoses that run from the compressor an to the evaporator and condensor. Compressor not needed.

Price shipped to Cedar Park Tx 78613 (NW of Austin)

[f.monroe]

I will look to see if I still have a set of a/c brackets . if so I would ship them to you for $60. Pm me if interested so I don't forget.
Several years ago I bough new lines at one of the parts stores. It was cheaper than having my lines repaired with new rubber.
Frank

[gmachinz]

I've got a set of BBC AC brackets-they've been blasted and painted a high temp satin black and cleared. All hardware included. I can do $150 shipped.

[f.monroe]

I made a quick run through the barn and found these. Its incomplete . I may be able to find the other parts if I can get home in the daylight. I will let you know .
Frank

[WIDESIDE72]

Originally Posted by gmachinz

I've got a set of BBC AC brackets-they've been blasted and painted a high temp satin black and cleared. All hardware included. I can do $150 shipped.

Thanks. Let me see what f.monroe can come up with. He's a little more in my range as far as budget.

[WIDESIDE72]

Originally Posted by gmachinz

I've got a set of BBC AC brackets-they've been blasted and painted a high temp satin black and cleared. All hardware included. I can do $150 shipped.

Originally Posted by f.monroe

I made a quick run through the barn and found these. Its incomplete . I may be able to find the other parts if I can get home in the daylight. I will let you know .
Frank

It looks like you're almost there! I believe the over the valve cover bracket is the one missing(?)

I didn't get a notification that you had posted again, so if you find the rest I them but don't hear from me, send me a pm, please.

[f.monroe]

I will look again in the barn when I can get out there in the daylight. I will let you know.
Frank

[gmachinz]

Originally Posted by WIDESIDE72

Thanks. Let me see what f.monroe can come up with. He's a little more in my range as far as budget.

Ok, no problem!

[WIDESIDE72]

F.monroe- any updates?

[f.monroe]

I have not been able to find the top bracket. I will look again but I can't promise anything.
Frank