|
09-18-2003, 04:58 PM
|
#1 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
Tuned Port Injection
Complete Kit
upper/lower Intakes and runners Accel 30 lbs. injectors - $249.99 @ Summit New Bosch sensors in intake New Accel Cap & Wires All wiring and ECM included ECM looks aftermarket also includes M.A.F. tube and upper/lower Air box for filters Pulled from a Z28 Camaro Asking $600 + shipping Located near Nashville, TN Email Me with any Questions: TWEED78@hotmail.com Last edited by CHEVYE; 09-18-2003 at 09:22 PM. |
|
|
|
09-18-2003, 05:06 PM
|
#2 |
|
Senior Member
 
Join Date: Mar 2000
Location: Saskatoon,SK,Canada
Posts: 2,476
|
Is it originally off of a 305 or a 350? Are all of the major parts from one car or is it an amalgamation of parts from different models and years?
Sent e-mail to link and it was returned as failure to deliver
__________________
Saskatoon, Saskatchewan Canada Last edited by StingRay; 09-18-2003 at 05:15 PM. |
|
|
|
|
09-18-2003, 05:33 PM
|
#3 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
everything was removed from my `86 z 28. the car had a 350 in it that was a groom`s crate engine. tuned port was already on it when i got it i will get the fuel rail #`s from it when i get home and post them. i will post a pic through a different web site here in a minute. tri pod seems to not want to cooperate. SORRY E MAIL SHOULD BE GOOD TOO NOW.
Last edited by CHEVYE; 09-18-2003 at 05:44 PM. |
|
|
|
|
09-18-2003, 06:40 PM
|
#4 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
really wouldn't matter about the engine size it came from. If the injectors have been replaced, that is the big difference. The fuel rails are all the same size. Only other difference would be the ECM. But those are easy to come by and replace. Or just get a new PROM burned. Not a bad price either. sounds like a complete setup. Too bad I already have 2 of them in my garage right now. My wife would kill me if I bought another....
|
|
|
|
|
09-18-2003, 07:14 PM
|
#5 |
|
Nothing clever
Join Date: Jun 2003
Location: Kailua HI
Posts: 828
|
this is what I want also, but cant part with all that cash at one time. will probably try to piece a set-up together.
__________________
Got "the Midas Touch!" |
|
|
|
|
09-18-2003, 07:21 PM
|
#6 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
I've got some pieces if you want to start. Got a decent set of runners that someone tried to powder coat. I was going to strip and recoat them. Also have a plenum from the same setup that looks better than the runners. I have to sell off some so I can aford the rest of the parts to make it whole. I bought 2 to make one out of. Let me know if your interested. Although, I wish I had just bought one like the one in this post. Then I wouldn't have to hunt for parts everywhere.
|
|
|
|
|
09-18-2003, 07:23 PM
|
#7 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
they are actually a lot more if you get it piece by piece. i see what you mean though. i loved the throttle response and power. i just built a 383 and i`m just gonna stuff a carb on top and ride.
|
|
|
|
|
09-18-2003, 07:26 PM
|
#8 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
my dad lives up there in clarkston mich. i`ll be there thanksgiving ......... small world
|
|
|
|
|
09-18-2003, 07:29 PM
|
#9 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
If you shop around and hit ebay at the right times, you can get good prices on stuff. I got 2 complete setups for les than $300. Both were missing small parts, but not the same small parts. I was going to buy an aftermarket harness anyway, so I didn't care if they came with that. Now I can sell off the parts I don't need and make a little money back. Just have to be patient.
Clarkston is only about 10 minutes from where I live. You should stop by when your up. I like to meet other board members. |
|
|
|
|
09-18-2003, 07:32 PM
|
#10 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
it`s gonna be cold isn`t it? all of my family works for GM. he works @ the parts place in waterford.
|
|
|
|
|
09-18-2003, 07:36 PM
|
#11 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
Shouldn't be too bad. Yes, it will be cold for you. But remember, it's winter here about 6-7 months out of the year. We are used to it. 45 is warm enough to go out and work on the truck! Plus I have a heater in the garage. Keeps it above freezing while I'm out there.
|
|
|
|
|
09-18-2003, 07:38 PM
|
#12 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
i grew up on lake superior in marquette, brrrrrrrrrrr.
|
|
|
|
|
09-18-2003, 07:51 PM
|
#13 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
They have winter 10-11 months out of the year there. My uncle has a cabin on the St Mary's River about 20 miles south of the Soo. always cold there. I learned to waterski up there. Needless to say, I learned quick. 4th of July the water was 61 degrees. One year we had snow on the 4th too. It's like a whole different world there.
|
|
|
|
|
09-18-2003, 08:24 PM
|
#14 |
|
Truck Farmer
Join Date: Nov 2001
Location: Lake Havasu City, Arizona
Posts: 1,192
|
Could you post pics, I would like this for my ZZ3.
__________________
Arizona rust free sheetmetal |
|
|
|
|
09-18-2003, 08:30 PM
|
#15 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
this crazy picture works when it wants to it seems. i had it going through yahoo for a minute and when i hit it up now it is gone. any ideas?
|
|
|
|
|
09-18-2003, 09:10 PM
|
#16 |
|
Nothing clever
Join Date: Jun 2003
Location: Kailua HI
Posts: 828
|
I dont really want to piece it together, but it is easier to spend little chunks, even if it costs you more in the long run.
Also try attaching the picture to your post at the bottom of the compose screen.
__________________
Got "the Midas Touch!" |
|
|
|
|
09-18-2003, 09:21 PM
|
#17 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
Heres a Pic.
|
|
|
|
|
09-18-2003, 09:29 PM
|
#18 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
That is one of the nicest set of runners I have seen. They are worth a lot by themselves. Most are all dinged up cuz the dumbass removing it had no idea what he was doing. Nice looking setup. What is the number on the computer?
|
|
|
|
|
09-18-2003, 09:41 PM
|
#19 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
there were a couple of very minor dings on it from the previous owner. you really have to baby those things though. ecm # should be 1227165. i`ll have to check when i get home. i do water heater engineering @ night and help people troubleshoot over the phone. i get to play on the cpu all night. that`s how i stumbled on the great web site.
|
|
|
|
|
09-18-2003, 10:42 PM
|
#20 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
what else would be needed to install on a current carbed small block??
I know nothing about the TPI, but have always been curious. I am just south of you by about 100 miles ... i could leave out the shipping and pick up in person. Thanks! |
|
|
|
|
09-18-2003, 10:49 PM
|
#21 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
just had that same ? e mailed. all it should require is an electric fuel pump and possibly a regulator. it will have to be fused on a circuit of coure but nothing too major. the biggest thing may be an o2 sensor. i,ll have to check what i`ve got left on the car and see what i`ve got left. where are you located? in tn?
|
|
|
|
|
09-18-2003, 10:54 PM
|
#22 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Athens, Alabama ... about 10 miles south of the TN-AL state line. Im about 100 miles south of nashville ... I just noticed you were from Clarksville. I am up that way quiet regularly, so it still wouldnt be a big deal.
|
|
|
|
|
09-18-2003, 10:58 PM
|
#23 |
|
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
very cool. i`ve seen these go on e bay for a lot rigged up like this one. i sell a lot on e bay under the same user name and i just wanted to give this site a sht at it first. i have 2 of these trucks and love them to death. i never have time to get one going. let me know if you are interested. thanks again.
|
|
|
|
|
09-18-2003, 11:23 PM
|
#24 |
|
Truck Farmer
Join Date: Nov 2001
Location: Lake Havasu City, Arizona
Posts: 1,192
|
Need any truck parts, maybe do some trading for some of the cash. Just a though, as this would go right on my Monte.
__________________
Arizona rust free sheetmetal |
|
|
|
|
09-19-2003, 03:32 PM
|
#25 |
|
Registered User
Join Date: Dec 2002
Location: Chillicothe OHIO
Posts: 717
|
I really don't know a whole lot about these, either. I was wondering how 'tuneable' a setup like this is... Does it have to pretty much sit on top of a mostly stock smallblock, or can it be opened up to handle a motor with some horses?
__________________
Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
