OH Vent Windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TKCR** · 01-31-2016, 12:50 PM

I have a very nice set of vent windows. I removed these from my 86 Chevy C10. I'm in the process of restoring my truck, so I installed a set of fully restored vent windows in place the place of mine. This set would be great as is or as a set to be fully restored from Precision, which is who did my new set. The vents are fully functional. I did clean them up the best I could and added some rubber conditioner to keep the rubber from drying out while they were in storage. I was waiting to see what my new windows looked like installed before parting with this set. The glass has aftermarket tint, which can be easily removed, if you want. One latch is a little loose, but it still functions and they close up tight. I just never had them open, so I only noticed the latch being loose while cleaning them up. Very minor pitting on the latches, inside & out!!!! These parts are 30 yrs old, so they are not PERFECT, but they are in good condition. The rubber does have some very small tears, but overall in good condition. Springs are not rusty!!!

This set is probably one of the nicer that I have seen, well other than the restored ones I just received. Look at the photos closely and make sure that you really want these before purchase. I will only only accept a return, if they are shipped backed in the original box and packing they come to you in. And the return shipping will be your responsibility.

These are listed on Ebay also. $150 +actually shipping. PayPal only.

UKNOWME · 01-31-2016, 01:15 PM

Wow that's a great deal!

favor · 01-31-2016, 02:36 PM

It's the glass frame (the part that touches the glass) that always rust out.Vent must be open to see this.especially inside bottom.

**TKCR** · 01-31-2016, 02:39 PM

Quote:

Originally Posted by favor

It's the glass frame (the part that touches the glass) that always rust out.Vent must be open to see this.especially inside bottom.

There is no rust. If you want a photo, the I can get them back out of the packaging and a get a few pics to post.

**TKCR** · 01-31-2016, 03:20 PM

Here's a photo of the frame. They are not rusted, but the rubber seems dry and looks a bit cruddy. It still seals the glass to the frame tight.

**TKCR** · 01-31-2016, 03:20 PM

And the other side.

favor · 01-31-2016, 05:15 PM

thanks for photo. I,m looking for rust free frames with nice glass.I don't care about the rest.I,ll replace seal knobs etc.

**TKCR** · 02-03-2016, 03:22 PM

Bump

Rust free & super nice!!!

1redbowtie3 · 02-04-2016, 01:13 PM

Would you take 150 shipped?

**TKCR** · 02-04-2016, 01:30 PM

Quote:

Originally Posted by 1redbowtie3

Would you take 150 shipped?

Sure, I can do that

**TKCR** · 02-04-2016, 04:31 PM

Quote:

Originally Posted by 1redbowtie3

Would you take 150 shipped?

SOLD!!! Thank you!!!

gasmn1620 · 02-05-2016, 06:36 AM

dammit.... I missed these.

**TKCR** · 02-05-2016, 12:56 PM

Quote:

Originally Posted by gasmn1620

dammit.... I missed these.

There are a lot of trucks in salvage yards in my area that still have the vents in them. I can get you a set, if your needing some.

01-31-2016, 12:50 PM	#1
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,980	Vent Windows I have a very nice set of vent windows. I removed these from my 86 Chevy C10. I'm in the process of restoring my truck, so I installed a set of fully restored vent windows in place the place of mine. This set would be great as is or as a set to be fully restored from Precision, which is who did my new set. The vents are fully functional. I did clean them up the best I could and added some rubber conditioner to keep the rubber from drying out while they were in storage. I was waiting to see what my new windows looked like installed before parting with this set. The glass has aftermarket tint, which can be easily removed, if you want. One latch is a little loose, but it still functions and they close up tight. I just never had them open, so I only noticed the latch being loose while cleaning them up. Very minor pitting on the latches, inside & out!!!! These parts are 30 yrs old, so they are not PERFECT, but they are in good condition. The rubber does have some very small tears, but overall in good condition. Springs are not rusty!!! This set is probably one of the nicer that I have seen, well other than the restored ones I just received. Look at the photos closely and make sure that you really want these before purchase. I will only only accept a return, if they are shipped backed in the original box and packing they come to you in. And the return shipping will be your responsibility. These are listed on Ebay also. $150 +actually shipping. PayPal only. Attached Images

01-31-2016, 01:15 PM	#2
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Vent Windows Wow that's a great deal! __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-31-2016, 02:36 PM	#3
favor Registered User Join Date: Sep 2015 Location: cape coral,FL Posts: 80	Re: Vent Windows It's the glass frame (the part that touches the glass) that always rust out.Vent must be open to see this.especially inside bottom.

01-31-2016, 03:20 PM	#5
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,980	Re: Vent Windows Here's a photo of the frame. They are not rusted, but the rubber seems dry and looks a bit cruddy. It still seals the glass to the frame tight. Attached Images

01-31-2016, 03:20 PM	#6
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,980	Re: Vent Windows And the other side. Attached Images

01-31-2016, 05:15 PM	#7
favor Registered User Join Date: Sep 2015 Location: cape coral,FL Posts: 80	Re: Vent Windows thanks for photo. I,m looking for rust free frames with nice glass.I don't care about the rest.I,ll replace seal knobs etc.

02-03-2016, 03:22 PM	#8
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,980	Re: Vent Windows Bump Rust free & super nice!!!

02-04-2016, 01:13 PM	#9
1redbowtie3 Registered User Join Date: Jan 2016 Location: Hood County Texas Posts: 63	Re: Vent Windows Would you take 150 shipped? __________________ 1985 K20 4spd 1978 K20 4spd

02-05-2016, 06:36 AM	#12
gasmn1620 Registered User Join Date: Oct 2014 Location: panama city, fl Posts: 204	Re: Vent Windows dammit.... I missed these.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.