KS WTB 72 Doors

[gs1969]

Looking for a pair of good rust free 72 doors. North east Kansas or North west Missouri.

Thanks
Gary

[Clatterville trolley]

Originally Posted by gs1969

Looking for a pair of good rust free 72 doors. North east Kansas or North west Missouri.

Thanks
Gary

I have one 72 only door (driver's side) - has little rust on bottom part. I know you asked for rust free, but if you can't come up with any, this one at least can be repaired without too much work. And from what I can tell watching this forum 72 only doors are too plentiful. Jay
BTW I live in Columbia, MO.

[colinl]

What's the difference between 69 and 72 doors

[CUSTOM/10]

The 72 doors have a screw hole on the inside just under the vent window that holds the inner and outer door panels together. it stiffens this area of the door. Also the window crank shaft & door relay shaft are longer due to the plastic door panels being thicker than the 67-71 metal panels.

Gary

[colinl]

Can this stuff be swapped out to make a set of 69 doors same as 72 doors?

[CUSTOM/10]

Gary;

I have a pair of rust free 72 doors from So. Cali, but there a long way from you !

Gary

[69short]

Gary I live just north of weston in dekalb. I think i may have a set of doors. Let me check and I'll let you know. I'm 20 minutes from Leavenworth.

[Robert Martin]

Originally Posted by CUSTOM/10

Gary;

I have a pair of rust free 72 doors from So. Cali, but there a long way from you !

Gary

this is old but it's a shot maybe. Any chance you might still have doors?

[bcnya2]

Scroll through the past week or so on the sight, there was an nos door on here

Originally Posted by gs1969

Looking for a pair of good rust free 72 doors. North east Kansas or North west Missouri.

Thanks
Gary

[flashed]

If you want to drive to Ga I have a nice pair ,will not ship and they aint cheap .

[Robert Martin]

How much ain't cheap...lol! Seems to me everything is high on this website. Send me some pictures. But they got to be rust and damage free if they're real high.

[Robert Martin]

Originally Posted by robert martin

how much ain't cheap...lol! Seems to me everything is high on this website. Send me some pictures. But they got to be rust and damage free if they're real high.

817- 723-5510

[flashed]

Look on the parts for sale board here and find the last pair of green doors sold and you will see pics .I drove a long way to get them for future projects if I need them .$600 per pair picked up and price is firm.

[Robert Martin]

Price isn't bad... I thought this was parts for sale thread?

[CUSTOM/10]

No, they've been sold !
Gary

Originally Posted by Robert Martin

this is old but it's a shot maybe. Any chance you might still have doors?

[flashed]

The thread with the doors pics has been pulled back to the top .

[Robert Martin]

Flashed, are those the doors? To rusty for what I'm looking for. The driver side inside looks like the bottom skin needs replaced. Yeah I'll pass, I can skinboth sides of my door. Was just looking for a possible good deal on a set I didn't need to do anything to except sand down or grit blast, prime and paint. Thanks for messaging me though.

[flashed]

I dont know what you are seeing but these doors are not rusty .One has surface rust on one edge of the bottom and that is all . But I dont mind if they stay in my shipping container for a future build if the next guy passes .Good luck finding better ones .

[Robert Martin]

Are they the 2 doors laying against the wall facing out.. they look black but are green? Moldings upper and lower?

[flashed]

They are Green with upper and lower trim .

[Robert Martin]

Yeah I saw them then, the one looks bad on the inside from the pictures. Maybe it isn't but it looks like it's about to go through. Pictures don't tell it all though