Porterbuilt c notch question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c105speed · 03-20-2016, 11:53 AM

I was installing my c notch yesterday and the spring bolt hole or airbag stud hole in the notch doesnt line up completely with the frame?

Should I enlarge the hole in the notch or the frame?

It's the hole not circled on the bottom of the frame.

Name: image.jpg
Views: 87
Size: 36.9 KB

**lolife99** · 03-20-2016, 11:58 AM

I would enlarge the hole in the frame.
Make sure you have the c-notch pulled up tight to the frame in all directions prior to drilling holes, for accurate placement.
A few c-clamps will help.

72c105speed · 03-20-2016, 12:15 PM

Quote:

Originally Posted by lolife99

I would enlarge the hole in the frame.
Make sure you have the c-notch pulled up tight to the frame in all directions prior to drilling holes, for accurate placement.
A few c-clamps will help.

Yes I did! I lined it all up and even tried to move the upper piece to get the bottom to line up with no luck.

03-20-2016, 11:53 AM	#1
72c105speed Registered User Join Date: Oct 2015 Location: Kentucky Posts: 172	Porterbuilt c notch question I was installing my c notch yesterday and the spring bolt hole or airbag stud hole in the notch doesnt line up completely with the frame? Should I enlarge the hole in the notch or the frame? It's the hole not circled on the bottom of the frame.

03-20-2016, 11:58 AM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt c notch question I would enlarge the hole in the frame. Make sure you have the c-notch pulled up tight to the frame in all directions prior to drilling holes, for accurate placement. A few c-clamps will help. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.