PA Rear floor cuts and cross members - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-21-2016, 08:19 PM

richard2717 gets first refusal of wheel well and surrounding area. Wheelwell 25 and depending on what you need will price accordingly but only one section real decent is the PS piece that runs parallel to the ribs.

There is 3 feet of decent floor section at the tailgate 30 a linear foot by 12 inches or less deep plus shipping.

All crossmembers 30 ea. plus shipping

Seat plates 28 ship for all 4

Seat channel underneath 60 plus shipping

Any other section tell me what you need and I will get you a price. SOLD

**1rippen6** · 03-21-2016, 08:20 PM

more pics

**1rippen6** · 03-21-2016, 08:21 PM

last

**richard2717** · 03-21-2016, 08:27 PM

Let me get back to you in the morning when I can see it on my big screen. This phone is too dagum small lol

**1rippen6** · 03-21-2016, 08:46 PM

sounds good

**richard2717** · 03-21-2016, 11:12 PM

Gonna pass on the tub. What would these sections run me? We could meet up when you come to VA next time so no rush on getting it cut. would even be interested in the entire floor if not too bad.

.

**1rippen6** · 03-22-2016, 07:35 AM

I'm assuming when you say not too bad you mean price LOL I will pm you my phone number and we can talk about it.

HYPERMAN · 03-22-2016, 07:47 AM

Can I get close pictures of the underside of rear floor section? I am interested if I like what I see.

Thanks

**Blazerowner** · 03-22-2016, 05:31 PM

Any chance you could throw a tape measure on the distance from the front of the panel to the bracing for the rear seat and possibly the front of the wheel well. I never had a rear seat so I don't have the 4 small plates and want to make some. How is the bracing underneath and is it removable?

rayray767 · 03-22-2016, 08:42 PM

I'll get in line Dewayne on the whole 3' x12" rear section what's my shipping to 43068 if it gets to me?
Thanks,
Ray....

HYPERMAN · 03-22-2016, 09:26 PM

To clarify my earlier post. If in good shape underneath, I will take. Shipping to 558401. PayPal? Message details.

**1rippen6** · 03-22-2016, 10:02 PM

Here are all the pictures I have for now richard2717 is first in line and then down the list.

**1rippen6** · 03-22-2016, 10:03 PM

last ones

**1rippen6** · 03-22-2016, 10:05 PM

Quote:

Originally Posted by Blazerowner

Any chance you could throw a tape measure on the distance from the front of the panel to the bracing for the rear seat and possibly the front of the wheel well. I never had a rear seat so I don't have the 4 small plates and want to make some. How is the bracing underneath and is it removable?

I can get you some measurements give me a couple days I in the middle of a tree project right now. I have a couple of the rear braces (the one with the four captured nuts) that go under the floor boards but they are heavy they just bolt on

**Blazerowner** · 03-23-2016, 11:08 AM

Ok take your time no hurry.

HYPERMAN · 03-24-2016, 10:24 PM

Sorry on zip 58401 for tal section of floor.

rayray767 · 03-28-2016, 03:02 PM

Is any of this floor still available or not ?I'm still interested I don't know if it's sold or not
Thank you....
Ray......

**1rippen6** · 03-28-2016, 03:05 PM

Richard 2717 said he will take the whole floor if something changes I will post back in this thread. I'm going to deliver to him late next month unless he changes his mind.

rayray767 · 03-28-2016, 08:39 PM

Ok thanks Dwayne

**1rippen6** · 04-07-2016, 06:32 PM

Quote:

Originally Posted by Blazerowner

Any chance you could throw a tape measure on the distance from the front of the panel to the bracing for the rear seat and possibly the front of the wheel well. I never had a rear seat so I don't have the 4 small plates and want to make some. How is the bracing underneath and is it removable?

Hope this helps I do have the nice seat brace that goes underneath from another blazer and yes it bolts on 60 plus shipping can get you some pictures. The seat plates on top are 2 1/2 x 5 3/4.

**1rippen6** · 04-07-2016, 08:07 PM

Quote:

Originally Posted by Blazerowner

Any chance you could throw a tape measure on the distance from the front of the panel to the bracing for the rear seat and possibly the front of the wheel well. I never had a rear seat so I don't have the 4 small plates and want to make some. How is the bracing underneath and is it removable?

LOL it is too small to read pm me your email address and I will send it so you can read it.

extd56 · 04-07-2016, 11:38 PM

I am also looking for the rear seat brace and the 4 small plates on top Thanks

**1rippen6** · 04-08-2016, 07:28 AM

Quote:

Originally Posted by extd56

I am also looking for the rear seat brace and the 4 small plates on top Thanks

I have several seat channels will dig you one out with the plates and get some pictures.

03-21-2016, 08:19 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Rear floor cuts and cross members richard2717 gets first refusal of wheel well and surrounding area. Wheelwell 25 and depending on what you need will price accordingly but only one section real decent is the PS piece that runs parallel to the ribs. There is 3 feet of decent floor section at the tailgate 30 a linear foot by 12 inches or less deep plus shipping. All crossmembers 30 ea. plus shipping Seat plates 28 ship for all 4 Seat channel underneath 60 plus shipping Any other section tell me what you need and I will get you a price. SOLD Attached Images Last edited by 1rippen6; 07-02-2016 at 08:15 AM.

03-21-2016, 08:20 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members more pics Attached Images

03-21-2016, 08:21 PM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members last Attached Images

03-21-2016, 08:27 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,136	Re: Rear floor cuts and cross members Let me get back to you in the morning when I can see it on my big screen. This phone is too dagum small lol __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-21-2016, 08:46 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members sounds good

03-21-2016, 11:12 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,136	Re: Rear floor cuts and cross members Gonna pass on the tub. What would these sections run me? We could meet up when you come to VA next time so no rush on getting it cut. would even be interested in the entire floor if not too bad. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-22-2016, 07:35 AM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members I'm assuming when you say not too bad you mean price LOL I will pm you my phone number and we can talk about it.

03-22-2016, 07:47 AM	#8
HYPERMAN Registered User Join Date: Mar 2000 Location: Moncton, New Brunswick Posts: 239	Re: Rear floor cuts and cross members Can I get close pictures of the underside of rear floor section? I am interested if I like what I see. Thanks

03-22-2016, 05:31 PM	#9
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,955	Re: Rear floor cuts and cross members Any chance you could throw a tape measure on the distance from the front of the panel to the bracing for the rear seat and possibly the front of the wheel well. I never had a rear seat so I don't have the 4 small plates and want to make some. How is the bracing underneath and is it removable? __________________ Kirk 72 Blazer CST 4wd highlander

03-22-2016, 08:42 PM	#10
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: Rear floor cuts and cross members I'll get in line Dewayne on the whole 3' x12" rear section what's my shipping to 43068 if it gets to me? Thanks, Ray....

03-22-2016, 09:26 PM	#11
HYPERMAN Registered User Join Date: Mar 2000 Location: Moncton, New Brunswick Posts: 239	Re: Rear floor cuts and cross members To clarify my earlier post. If in good shape underneath, I will take. Shipping to 558401. PayPal? Message details.

03-22-2016, 10:02 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members Here are all the pictures I have for now richard2717 is first in line and then down the list. Attached Images

03-22-2016, 10:03 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members last ones Attached Images

03-23-2016, 11:08 AM	#15
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,955	Re: Rear floor cuts and cross members Ok take your time no hurry. __________________ Kirk 72 Blazer CST 4wd highlander

03-24-2016, 10:24 PM	#16
HYPERMAN Registered User Join Date: Mar 2000 Location: Moncton, New Brunswick Posts: 239	Re: Rear floor cuts and cross members Sorry on zip 58401 for tal section of floor.



Register or Log In To remove these advertisements.

03-28-2016, 03:02 PM	#17
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: Rear floor cuts and cross members Is any of this floor still available or not ?I'm still interested I don't know if it's sold or not Thank you.... Ray......

03-28-2016, 03:05 PM	#18
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Rear floor cuts and cross members Richard 2717 said he will take the whole floor if something changes I will post back in this thread. I'm going to deliver to him late next month unless he changes his mind.

03-28-2016, 08:39 PM	#19
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: Rear floor cuts and cross members Ok thanks Dwayne

04-07-2016, 11:38 PM	#22
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Rear floor cuts and cross members I am also looking for the rear seat brace and the 4 small plates on top Thanks

Register or Log In To remove these advertisements.