turn signal cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

backinblack · 09-27-2003, 10:40 PM

I replaced my turn signal cam in my 72, so that it would turn off after I make the turn, but it still wont. It feels kinda stiff, or hard to turn on the signal too. What gives?

Tx Firefighter · 09-27-2003, 10:47 PM

There are two little springs on top of the turn signal switch, called Turn Signal cancel spring. One to cancel each direction. They break all the time. New spring is 13 cents at GM dealer. They are different left and right, so make sure to get the correct one.

71k5 · 09-27-2003, 10:58 PM

I believe the springs are red and blue from the dealer.

09-27-2003, 10:40 PM	#1
backinblack Registered User Join Date: Aug 2002 Location: Utah Posts: 142	turn signal cam I replaced my turn signal cam in my 72, so that it would turn off after I make the turn, but it still wont. It feels kinda stiff, or hard to turn on the signal too. What gives? __________________ 69 chevy SWB 70 GTO 65 GTO hardtop 65 GTO ragtop 77 Trans Am Hmmm. Too many pontiacs, not enough chevy trucks yet.

09-27-2003, 10:47 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	There are two little springs on top of the turn signal switch, called Turn Signal cancel spring. One to cancel each direction. They break all the time. New spring is 13 cents at GM dealer. They are different left and right, so make sure to get the correct one. __________________ I'm on the Instagram- @Gearhead_Kevin

09-27-2003, 10:58 PM	#3
71k5 Registered User Join Date: Feb 2002 Location: Manchester, PA Posts: 138	I believe the springs are red and blue from the dealer.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.