CA 15x8 6-Lug Steel Wheels for 1964-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NVS-C10 · 05-02-2016, 07:27 PM

I have a clean set of 15x8 factory 6-lug 3-nub steel wheels correct for 1964-72 but will fit all our 6-lug trucks.

$380/set of four picked up or plus shipping.

bhahn70 · 05-02-2016, 08:03 PM

What is the back spacing

NVS-C10 · 05-02-2016, 10:09 PM

Quote:

Originally Posted by bhahn70

what is the back spacing

3.5"

joeydurango · 05-02-2016, 10:16 PM

I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested...

NVS-C10 · 05-02-2016, 10:22 PM

Quote:

Originally Posted by joeydurango

I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested...

Yes these are drum style 3-nub wheels.. most people use them on the rear for a staggered offset/rear deep dish look.

NVS-C10 · 05-04-2016, 08:25 PM

TTT

Also willing to split up the set (2 and 2) for those of you that want them for rear only..
I can also have sand blasted and powder coated any color for $50/each wheel.

NVS-C10 · 05-06-2016, 07:06 PM

TTT - Revised Price!!

NVS-C10 · 05-13-2016, 02:54 PM

Ttt

**special-K** · 05-14-2016, 09:17 AM

I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets.

Huggerorangeblood · 05-14-2016, 11:27 AM

My 1972 k10 has 3 nub wheels.

67swb72klb · 05-14-2016, 11:46 AM

I have used them before on disc brake K10's before with very little grinding needed

NVS-C10 · 05-14-2016, 10:54 PM

Quote:

Originally Posted by special-K

I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets.

Tell me about it lol

**special-K** · 05-15-2016, 07:28 AM

Try relisting them for $500. That has actually worked for me before. Makes them seem more desirable I guess

. These won't last long. Too bad you don't have a 6-lug 4wd disc brake truck to fit them up to test. The Blazer people would be all over these if they knew they'd work

rdhowe2006@yahoo.com · 05-30-2016, 12:38 AM

What is 3 nub or 4 nub?

NVS-C10 · 05-30-2016, 12:46 AM

The bumps that hold on dog dish style hubcaps

rdhowe2006@yahoo.com · 05-30-2016, 01:25 PM

Thanks

**Already Gone** · 05-30-2016, 08:00 PM

subscribed

*ck5566* · 05-30-2016, 09:46 PM

Have you taken them to a Tire store and have them spun to see how true they are?

6t9camaro · 05-30-2016, 11:19 PM

How much for 2 shipped to 58271 ?

NVS-C10 · 05-31-2016, 01:00 AM

Quote:

Originally Posted by ck5566

Have you taken them to a Tire store and have them spun to see how true they are?

Yes.. I bought them from a wheel and tire store.

NVS-C10 · 05-31-2016, 01:01 AM

Quote:

Originally Posted by 6t9camaro

How much for 2 shipped to 58271 ?

I have someone that I just gave a quote for all four shipped to AZ. If he passes I'll get you a quote.

Big O · 05-31-2016, 05:22 PM

I would like to get on that list also, ship to 77357, plz.

NVS-C10 · 05-31-2016, 08:50 PM

2-wheels are sold pending payment...

NVS-C10 · 05-31-2016, 08:53 PM

Quote:

Originally Posted by 6t9camaro

How much for 2 shipped to 58271 ?

$274.22 for two shipped to 58271

NVS-C10 · 05-31-2016, 08:55 PM

Quote:

Originally Posted by Big O

I would like to get on that list also, ship to 77357, plz.

$259.56 for two shipped to 77357

05-02-2016, 07:27 PM	#1
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	15x8 6-Lug Steel Wheels for 1964-72 I have a clean set of 15x8 factory 6-lug 3-nub steel wheels correct for 1964-72 but will fit all our 6-lug trucks. $380/set of four picked up or plus shipping. Last edited by NVS-C10; 05-06-2016 at 07:07 PM.

05-02-2016, 08:03 PM	#2
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: 15x8 6-Lug Steel Wheels for 1964-72 What is the back spacing

05-02-2016, 10:16 PM	#4
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: 15x8 6-Lug Steel Wheels for 1964-72 I could be wrong - someone correct me if so - but I think those will only fit drum brakes. 4-nub for disc, I believe. Otherwise, I'd be interested... __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

05-04-2016, 08:25 PM	#6
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 TTT Also willing to split up the set (2 and 2) for those of you that want them for rear only.. I can also have sand blasted and powder coated any color for $50/each wheel.

05-06-2016, 07:06 PM	#7
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 TTT - Revised Price!!

05-13-2016, 02:54 PM	#8
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 Ttt

05-14-2016, 09:17 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 15x8 6-Lug Steel Wheels for 1964-72 I'm surprised no one has taken you up on these. They are what any drum brake 70-back GM truck (way back) could use or any two trucks with disc brakes running 8s on rear and 6s on front. Even if these were 4-nub they'd never need to go on the front anyway. You don't rotate big/little sets. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-14-2016, 11:27 AM	#10
Huggerorangeblood Registered User Join Date: Apr 2011 Location: Corvallis, Or Posts: 119	Re: 15x8 6-Lug Steel Wheels for 1964-72 My 1972 k10 has 3 nub wheels.

05-14-2016, 11:46 AM	#11
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,452	Re: 15x8 6-Lug Steel Wheels for 1964-72 I have used them before on disc brake K10's before with very little grinding needed __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

05-15-2016, 07:28 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 15x8 6-Lug Steel Wheels for 1964-72 Try relisting them for $500. That has actually worked for me before. Makes them seem more desirable I guess . These won't last long. Too bad you don't have a 6-lug 4wd disc brake truck to fit them up to test. The Blazer people would be all over these if they knew they'd work __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-30-2016, 12:38 AM	#14
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 15x8 6-Lug Steel Wheels for 1964-72 What is 3 nub or 4 nub?

05-30-2016, 12:46 AM	#15
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 The bumps that hold on dog dish style hubcaps

05-30-2016, 01:25 PM	#16
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 15x8 6-Lug Steel Wheels for 1964-72 Thanks

05-30-2016, 08:00 PM	#17
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,109	Re: 15x8 6-Lug Steel Wheels for 1964-72 subscribed __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-30-2016, 09:46 PM	#18
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Re: 15x8 6-Lug Steel Wheels for 1964-72 Have you taken them to a Tire store and have them spun to see how true they are?



Register or Log In To remove these advertisements.

05-30-2016, 11:19 PM	#19
6t9camaro Registered User Join Date: Apr 2012 Location: Winnipeg, Mb Posts: 487	Re: 15x8 6-Lug Steel Wheels for 1964-72 How much for 2 shipped to 58271 ?

05-31-2016, 05:22 PM	#22
Big O Registered User Join Date: May 2006 Location: North of Houston, TX Posts: 39	Re: 15x8 6-Lug Steel Wheels for 1964-72 I would like to get on that list also, ship to 77357, plz.

05-31-2016, 08:50 PM	#23
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 15x8 6-Lug Steel Wheels for 1964-72 2-wheels are sold pending payment...

Register or Log In To remove these advertisements.