67 C10 stepper frame off - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jwilb88 · 05-10-2016, 10:44 AM

Been lurking this site through the whole process so I figured it was only appropriate to start a build thread after I joined. Anyways here it is when I started. My goal for this project is to have a clean, somewhat original look, and to be a dependable driver.

jwilb88 · 05-10-2016, 10:53 AM

Pictures of the tear down....

jwilb88 · 05-10-2016, 12:36 PM

Some pictures of the frame after being coated using the KBS system

jwilb88 · 05-10-2016, 12:40 PM

Front suspension and brakes finally finished up this weekend. Parts consist of CPP 5 lug conversion 2.5 drop spindles, 2 inch drop springs, and all new steering components

jwilb88 · 05-10-2016, 01:00 PM

Picked up the power plant from the machine shop a few weeks ago. I can't wait to bust this rig off

nate68 · 05-10-2016, 03:27 PM

What size and brand tires?

jwilb88 · 05-10-2016, 03:51 PM

Quote:

Originally Posted by nate68

What size and brand tires?

28 x 10 R18 Mickey Thompson S/R radial

kingNothing · 05-10-2016, 04:20 PM

Are you using the 28x10 r18 front and rear ? I like the amount of sidewall.

jwilb88 · 05-10-2016, 04:29 PM

Quote:

Originally Posted by kingNothing

Are you using the 28x10 r18 front and rear ? I like the amount of sidewall.

No I'm running 28 x 10 up front on an 8'' wide wheel and 28 x 13.50 on back on a 12''wide wheel (if they will every ship!) I've been waiting on the rears for three months

JD'S 69 · 05-11-2016, 02:33 AM

Took me over six months to get mine..

jwilb88 · 05-11-2016, 07:47 AM

Quote:

Originally Posted by JD'S 69

Took me over six months to get mine..

I couldn't wait any longer, I called yesterday and American eagle wheel corp. couldn't even tell me when they would be manufacturing chrome wheels again, so I order a set of gun metal 338's

jwilb88 · 05-11-2016, 07:51 AM

Stopped by and checked out some parts at the paint shop yesterday, I had the inside of the fenders and bottom of the steps lined. Its amazing how much it deadens the sounds produced by the metal fenders.

jwilb88 · 05-11-2016, 07:53 AM

Couple pictures of the tailgate getting prepped

jwilb88 · 05-11-2016, 07:57 AM

Got the new steering box mounted up last night. I had this box built at benchworks steering. Should be a direct fit for the LS power steering pump lines.

Katrina/10 · 05-11-2016, 07:58 AM

Nice truck, I'd like to see it someday.

jwilb88 · 05-11-2016, 08:02 AM

Quote:

Originally Posted by Katrina/10

Nice truck, I'd like to see it someday.

anytime man, it's not much to look at right now though

68is4me · 05-11-2016, 01:45 PM

Quote:

Originally Posted by jwilb88

No I'm running 28 x 10 up front on an 8'' wide wheel and 28 x 13.50 on back on a 12''wide wheel (if they will every ship!) I've been waiting on the rears for three months

Are you going to tub it? Will the 13.50 fit? I think I have 9.5 and they are really close to rubbing.

68is4me · 05-11-2016, 01:48 PM

Never mind, I noticed that you are not that low so you should not have a problem.

By the way, that looks like it was a nice truck to start with.

jwilb88 · 05-11-2016, 01:53 PM

Quote:

Originally Posted by 68is4me

Never mind, I noticed that you are not that low so you should not have a problem.

By the way, that looks like it was a nice truck to start with.

It's got a totally tubular kit in the rear from CPP, it's a 6'' rear drop (Drop was installed after the pictures of it together). I'm going to cut a set of factory fleet side wheel tubs to get the extra clearance.

swamp rat · 05-12-2016, 12:16 AM

Nice work! Following.

jwilb88 · 05-16-2016, 07:24 AM

Some progress for the weekend... Got the new axle bearings and seals installed with the new moser 5 lug conversion axles

jwilb88 · 05-16-2016, 07:28 AM

Couple driveway pictures after I mounted the rear wheels and tires. Should have the matching front wheels today

jwilb88 · 05-16-2016, 07:30 AM

Little goofing off with the dummy block to get a visual of how the motor will look installed.

Bubba4spd · 06-05-2016, 08:45 PM

Well thought out project. Looking forward to seeing the next steps.

Bubba4spd · 06-11-2016, 01:50 PM

Any progress JW?

05-10-2016, 10:44 AM	#1
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	67 C10 Building a driver... Been lurking this site through the whole process so I figured it was only appropriate to start a build thread after I joined. Anyways here it is when I started. My goal for this project is to have a clean, somewhat original look, and to be a dependable driver. Attached Images Last edited by jwilb88; 05-12-2016 at 01:21 PM.

05-10-2016, 10:53 AM	#2
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Pictures of the tear down.... Attached Images

05-10-2016, 12:36 PM	#3
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Some pictures of the frame after being coated using the KBS system Attached Images

05-10-2016, 12:40 PM	#4
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Front suspension and brakes finally finished up this weekend. Parts consist of CPP 5 lug conversion 2.5 drop spindles, 2 inch drop springs, and all new steering components Attached Images

05-10-2016, 01:00 PM	#5
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Picked up the power plant from the machine shop a few weeks ago. I can't wait to bust this rig off Attached Images

05-10-2016, 03:27 PM	#6
nate68 Registered User Join Date: Jan 2000 Location: ca Posts: 1,110	Re: 67 C10 stepper frame off What size and brand tires? __________________ 68 short step, 406/700r4, 9" w/discs.

05-10-2016, 04:20 PM	#8
kingNothing Registered User Join Date: Apr 2015 Location: Boaz,Al Posts: 209	Re: 67 C10 stepper frame off Are you using the 28x10 r18 front and rear ? I like the amount of sidewall. __________________ Yeah' well sometimes nothin' can be a real cool hand Lucas Jackson

05-11-2016, 02:33 AM	#10
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: 67 C10 stepper frame off Took me over six months to get mine.. __________________ When I stand before god at the at the end of my life, I would hope that I would not have a single bit of talent left, and I could say," I used everything you gave me" My 69 stepper http://67-72chevytrucks.com/vboard/s...d.php?t=601095

05-11-2016, 07:51 AM	#12
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Stopped by and checked out some parts at the paint shop yesterday, I had the inside of the fenders and bottom of the steps lined. Its amazing how much it deadens the sounds produced by the metal fenders. Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

05-11-2016, 07:53 AM	#13
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Couple pictures of the tailgate getting prepped Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

05-11-2016, 07:57 AM	#14
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Got the new steering box mounted up last night. I had this box built at benchworks steering. Should be a direct fit for the LS power steering pump lines. Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656 Last edited by jwilb88; 05-11-2016 at 12:57 PM.

05-11-2016, 07:58 AM	#15
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: 67 C10 stepper frame off Nice truck, I'd like to see it someday. __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

05-11-2016, 01:48 PM	#18
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: 67 C10 stepper frame off Never mind, I noticed that you are not that low so you should not have a problem. By the way, that looks like it was a nice truck to start with. __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

05-12-2016, 12:16 AM	#20
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 67 C10 stepper frame off Nice work! Following. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

05-16-2016, 07:24 AM	#21
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Some progress for the weekend... Got the new axle bearings and seals installed with the new moser 5 lug conversion axles Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656



Register or Log In To remove these advertisements.

05-16-2016, 07:28 AM	#22
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Couple driveway pictures after I mounted the rear wheels and tires. Should have the matching front wheels today Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

05-16-2016, 07:30 AM	#23
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: 67 C10 stepper frame off Little goofing off with the dummy block to get a visual of how the motor will look installed. Attached Images __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

06-05-2016, 08:45 PM	#24
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: 67 C10 stepper frame off Well thought out project. Looking forward to seeing the next steps.

06-11-2016, 01:50 PM	#25
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: 67 C10 stepper frame off Any progress JW?

Register or Log In To remove these advertisements.