IA parting out a 74 1 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JDL** · 05-18-2016, 09:37 PM

rust free truck fenders $125 each
inner fenders $65 each
head light rings 35 each
plus shipping
Please respond in thread before PM
Ask about other parts.
Pick up of big parts would be nice.

*gmachinz* · 05-18-2016, 11:03 PM

If the dash is nice I'm interested in it. Any cracks?

**JDL** · 05-19-2016, 09:27 PM

Quote:

Originally Posted by gmachinz

If the dash is nice I'm interested in it. Any cracks?

it is junk

**JDL** · 05-19-2016, 09:33 PM

Grill 40 plus shipping

**JDL** · 05-19-2016, 09:46 PM

seat looks ok 75

burban nate · 05-19-2016, 09:59 PM

Are both Sierra 35 emblems intact? If they are and they aren't pitted I'd be interested. I don't care about dull scratched chrome. I just don't want blown out blistering stuff.

Nate

burban nate · 05-19-2016, 10:00 PM

Also interested in head light rings and upper and lower grill trim.

Nate

**JDL** · 05-19-2016, 10:11 PM

Quote:

Originally Posted by burban nate

Also interested in head light rings and upper and lower grill trim.

Nate

Yes both Sierra 35 emblems intact I will get some belter pics

ECU PIRATE · 05-20-2016, 03:28 PM

Interested in the complete cab wiring harness if it has not been hacked to pieces.

Mike

dragonball98312 · 05-20-2016, 10:15 PM

Are the 4 speed pedals and z bar linkage gone?

**JDL** · 05-21-2016, 10:25 PM

Quote:

Originally Posted by burban nate

Are both Sierra 35 emblems intact? If they are and they aren't pitted I'd be interested. I don't care about dull scratched chrome. I just don't want blown out blistering stuff.

Nate

How about 35 shipped

**JDL** · 05-21-2016, 10:28 PM

Quote:

Originally Posted by dragonball98312

Are the 4 speed pedals and z bar linkage gone?

How much do you need?

burban nate · 05-21-2016, 11:25 PM

Quote:

Originally Posted by JDL

How about 35 shipped

Pm sent

Nate

tommy217xxx · 05-22-2016, 12:14 AM

Hey man, I need the clips that hold the upper and lower grill trim in. How much for them shipped to 48327?

**old Rusty C10** · 05-22-2016, 08:19 PM

would you sell me the left seat belt ( drivers ) just the part that has the male end I don't need the complete belt the retractor/shoulder belt etc left side shipped to 07731

**JDL** · 05-22-2016, 09:01 PM

Quote:

Originally Posted by tommy217xxx

Hey man, I need the clips that hold the upper and lower grill trim in. How much for them shipped to 48327?

the clips are attached to the trim you are 2nd in line

tommy217xxx · 05-22-2016, 09:07 PM

If the first person backs out, how much for the trim?

**JDL** · 05-22-2016, 09:57 PM

Quote:

Originally Posted by old Rusty C10

would you sell me the left seat belt ( drivers ) just the part that has the male end I don't need the complete belt the retractor/shoulder belt etc left side shipped to 07731

$8 shipped

Woodyboat · 05-25-2016, 12:08 AM

I'm looking for some wing windows - both sides. Please, not broken and not rusted. I really am not worried about all the rubber parts because I can get them new. I do want some frames. Hit me up?

**JDL** · 05-26-2016, 10:28 PM

Quote:

Originally Posted by Woodyboat

I'm looking for some wing windows - both sides. Please, not broken and not rusted. I really am not worried about all the rubber parts because I can get them new. I do want some frames. Hit me up?

I don't think they're in good shape. I will get some pics

**JDL** · 05-26-2016, 10:34 PM

head light rings and upper and lower grill trim sold and shipped
Sierra 35 emblems sold and shipped
Thank burban nate

seat belt part sold
Thanks old Rusty C10
what are you using it for

Woodyboat · 05-27-2016, 05:46 AM

Quote:

Originally Posted by JDL

I don't think they're in good shape. I will get some pics

That's ok. On mine, the right side has the bottom post broken and so, I have to leave it closed to keep it from falling out. The driver's side works well but the frame itself is actually rusted and will never look good. It's certainly not repairable. We have a local pull your own part junk yard that occasionally gets square bodies but the Chevy guys get out there almost the day they hit the yard. Doors are like the first things to get sold.

GonicGM · 05-29-2016, 09:12 AM

I'd have interest in the rear spring shackles it they are the folded design with two rivets each.

burban nate · 05-29-2016, 10:45 AM

Which style exterior door handles does it have? Are they solid on the back side or hollowed out where you grab them?

Thanks, Nate

**JDL** · 05-29-2016, 01:13 PM

Quote:

Originally Posted by dragonball98312

Are the 4 speed pedals and z bar linkage gone?

Pics of Pedals, Z- bar and Linkage. This are going welded up and bushings put in.

05-18-2016, 09:37 PM	#1
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	parting out a 74 1 ton rust free truck fenders $125 each inner fenders $65 each head light rings 35 each plus shipping Please respond in thread before PM Ask about other parts. Pick up of big parts would be nice. Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

05-18-2016, 11:03 PM	#2
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: parting out a 74 1 ton If the dash is nice I'm interested in it. Any cracks?

05-19-2016, 09:33 PM	#4
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Re: parting out a 74 1 ton Grill 40 plus shipping Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

05-19-2016, 09:46 PM	#5
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Re: parting out a 74 1 ton seat looks ok 75 Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

05-19-2016, 09:59 PM	#6
burban nate Registered User Join Date: Feb 2014 Location: Reedsville, WI Posts: 191	Re: parting out a 74 1 ton Are both Sierra 35 emblems intact? If they are and they aren't pitted I'd be interested. I don't care about dull scratched chrome. I just don't want blown out blistering stuff. Nate __________________ Current Project: 1990 V3500 CC dually.

05-19-2016, 10:00 PM	#7
burban nate Registered User Join Date: Feb 2014 Location: Reedsville, WI Posts: 191	Re: parting out a 74 1 ton Also interested in head light rings and upper and lower grill trim. Nate __________________ Current Project: 1990 V3500 CC dually.

05-20-2016, 03:28 PM	#9
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: parting out a 74 1 ton Interested in the complete cab wiring harness if it has not been hacked to pieces. Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

05-20-2016, 10:15 PM	#10
dragonball98312 Registered User Join Date: Nov 2010 Location: Belfair, Wa Posts: 477	Re: parting out a 74 1 ton Are the 4 speed pedals and z bar linkage gone?

05-22-2016, 12:14 AM	#14
tommy217xxx Registered User Join Date: Oct 2014 Location: mi Posts: 359	Re: parting out a 74 1 ton Hey man, I need the clips that hold the upper and lower grill trim in. How much for them shipped to 48327? __________________ TJ 76 gmc 1500 swb patina finish Dropped 4/5, 350/4 speed 80 Chevy c10 lwb 305/350

05-22-2016, 08:19 PM	#15
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: parting out a 74 1 ton would you sell me the left seat belt ( drivers ) just the part that has the male end I don't need the complete belt the retractor/shoulder belt etc left side shipped to 07731 __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-22-2016, 09:07 PM	#17
tommy217xxx Registered User Join Date: Oct 2014 Location: mi Posts: 359	Re: parting out a 74 1 ton If the first person backs out, how much for the trim? __________________ TJ 76 gmc 1500 swb patina finish Dropped 4/5, 350/4 speed 80 Chevy c10 lwb 305/350

05-25-2016, 12:08 AM	#19
Woodyboat Registered User Join Date: Feb 2016 Location: Clarksville, Tn. Posts: 183	Re: parting out a 74 1 ton I'm looking for some wing windows - both sides. Please, not broken and not rusted. I really am not worried about all the rubber parts because I can get them new. I do want some frames. Hit me up?

05-26-2016, 10:34 PM	#21
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Re: parting out a 74 1 ton head light rings and upper and lower grill trim sold and shipped Sierra 35 emblems sold and shipped Thank burban nate seat belt part sold Thanks old Rusty C10 what are you using it for __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

05-29-2016, 09:12 AM	#23
GonicGM Registered User Join Date: Mar 2014 Location: Rochester, NH Posts: 168	Re: parting out a 74 1 ton I'd have interest in the rear spring shackles it they are the folded design with two rivets each. __________________ 83 K30 SRW 350 TH400 NP205 4.10 9' Fisher 85 K30 SRW 350 TH400 NP205 4.10 87 V3500 Dually 454 TBI SM465 NP205 4.10 9' Fisher 83 K2500 350 TH700R4 8600GVW Dual Tank 4.10 1973 Cheyenne Super 30 DRW Std Cab Z83 4.10 1976 Silverado C30 Std Cab 4.10 DRW (4 sale)

05-29-2016, 10:45 AM	#24
burban nate Registered User Join Date: Feb 2014 Location: Reedsville, WI Posts: 191	Re: parting out a 74 1 ton Which style exterior door handles does it have? Are they solid on the back side or hollowed out where you grab them? Thanks, Nate __________________ Current Project: 1990 V3500 CC dually.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.