TN Big block 435 hp tri power intake and carbs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 05-26-2016, 10:08 PM

I need to let this go to fund my builds , my budget has disappeared a while back it's all date coded to 10/5/67 factory corvette 427 435 hp tri power intake and correct carbs also date coded correct . They can be found in the $3,500.00 range ill take $2,500.00 shipped and insured

Harris57 · 05-27-2016, 12:55 AM

Pictures? Any linkage or air cleaner?

tjsblazer · 05-27-2016, 03:25 AM

Nice piece. Gotta love a 67 big block. See my avatar. I'd think this might get a lot more traction in a vette forum but I'm sure you know that already.

**Grumpy old man** · 05-27-2016, 05:14 AM

These are getting pretty hard to find date coded with the original carbs , no aircleaner with this one , they can be found for about $350.00 , I thought I'd give the guys in here a shot at it before putting it in the corvette/ chevelle forums . Offers ,partial trades ?

**1969guy** · 05-27-2016, 06:49 AM

What do you need for parts if there was some sort of trade?

**Grumpy old man** · 05-27-2016, 07:30 AM

Quote:

Originally Posted by 1969guy

What do you need for parts if there was some sort of trade?

Well all my trucks are 67 short beds so

A titled cab and short frame 67
Posi rears
67 folding bench seats
Unfinished projects
Hunting/ personal protection tools
Fleet beds
What have you got ?

FlameOut · 05-27-2016, 07:30 AM

That is a nice price for this setup. I remember buying this exact setup in 1972 for $100.00 to put on a 1969 427 (also paid $100 for) to put in my 69 Chevelle. Even the air cleaner for that is big bucks now. Sold the car a year later for $200. I was young and dumb. Sorry for ranting on your fs ad. Just brought back memories.

**Grumpy old man** · 05-27-2016, 07:36 AM

Well , I'm really looking hard at a No limit frame and their only 20 minutes from me , I've been there drooling more than once ! So I'm going to have to start purging some hold over parts to get this past MRS GRUMPY ! Time to sell some truck seats fast at a discount !

1968vetL-71 · 05-27-2016, 07:47 AM

Neat set up for sure. It is a 435 set up not a 400hp? What is the casting #? That late of a date could be a extremely late 67 or early 68. Thats what my 68 435 was. Your probably gonna get a better target audience if you hit the NCRS forum or corvette forums. Unfortunately Ebay is flooded with these items as everyone is trying too build that CLONE they have and try too pass it off as an original at a BJ auction. lol

Would be interested in some pics.
You wouldn't want a 68 swb 4x4 rolling chassis would ya?

**Grumpy old man** · 05-27-2016, 07:56 AM

GM 3919852 winters snowflake intake = 435 hp

Front carb 3659
Center 4055
Rear carb 3659

No cracks, no repairs

Send me some pictures of the 68 4x4 frame and what you want for it

Grumpyoldmanstruckparts@gmail.com

**Grumpy old man** · 05-28-2016, 01:15 PM

Ttt buy it before I change my mind , I'm pretty sure I can take MRS Grumpy to dinner and increase.my budget again , and again ,and again

Harris57 · 05-28-2016, 06:25 PM

Quote:

Originally Posted by Grumpy old man

GM 3919852 winters snowflake intake = 435 hp

Front carb 3659
Center 4055
Rear carb 3659

No cracks, no repairs

Send me some pictures of the 68 4x4 frame and what you want for it

Grumpyoldmanstruckparts@gmail.com

Can we see some pictures?

**Grumpy old man** · 05-28-2016, 10:03 PM

Quote:

Originally Posted by Harris57

Can we see some pictures?

Pm me a phone # or email for pictures

Harris57 · 05-31-2016, 12:55 PM

Quote:

Originally Posted by Grumpy old man

Pm me a phone # or email for pictures

Thank you for the pictures. I am going to pass at this time but will upload the pictures for you so others may see them

**Ironangel** · 05-31-2016, 10:47 PM

Quote:

Originally Posted by Harris57

Thank you for the pictures. I am going to pass at this time but will upload the pictures for you so others may see them

Thanks for the pics!

05-26-2016, 10:08 PM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Big block 435 hp tri power intake and carbs I need to let this go to fund my builds , my budget has disappeared a while back it's all date coded to 10/5/67 factory corvette 427 435 hp tri power intake and correct carbs also date coded correct . They can be found in the $3,500.00 range ill take $2,500.00 shipped and insured __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-27-2016, 12:55 AM	#2
Harris57 Registered User Join Date: Nov 2014 Location: Fullerton CA Posts: 258	Re: Big block 435 hp tri power intake and carbs Pictures? Any linkage or air cleaner? __________________ '71 Chevy swb fleet yellow project '64 Impala SS 409 4-speed 51K mile black/silver survivor

05-27-2016, 03:25 AM	#3
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Big block 435 hp tri power intake and carbs Nice piece. Gotta love a 67 big block. See my avatar. I'd think this might get a lot more traction in a vette forum but I'm sure you know that already. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

05-27-2016, 05:14 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Big block 435 hp tri power intake and carbs These are getting pretty hard to find date coded with the original carbs , no aircleaner with this one , they can be found for about $350.00 , I thought I'd give the guys in here a shot at it before putting it in the corvette/ chevelle forums . Offers ,partial trades ? __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-27-2016, 06:49 AM	#5
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: Big block 435 hp tri power intake and carbs What do you need for parts if there was some sort of trade?

05-27-2016, 07:30 AM	#7
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Big block 435 hp tri power intake and carbs That is a nice price for this setup. I remember buying this exact setup in 1972 for $100.00 to put on a 1969 427 (also paid $100 for) to put in my 69 Chevelle. Even the air cleaner for that is big bucks now. Sold the car a year later for $200. I was young and dumb. Sorry for ranting on your fs ad. Just brought back memories. __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

05-27-2016, 07:36 AM	#8
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Big block 435 hp tri power intake and carbs Well , I'm really looking hard at a No limit frame and their only 20 minutes from me , I've been there drooling more than once ! So I'm going to have to start purging some hold over parts to get this past MRS GRUMPY ! Time to sell some truck seats fast at a discount ! __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-27-2016, 07:47 AM	#9
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Big block 435 hp tri power intake and carbs Neat set up for sure. It is a 435 set up not a 400hp? What is the casting #? That late of a date could be a extremely late 67 or early 68. Thats what my 68 435 was. Your probably gonna get a better target audience if you hit the NCRS forum or corvette forums. Unfortunately Ebay is flooded with these items as everyone is trying too build that CLONE they have and try too pass it off as an original at a BJ auction. lol Would be interested in some pics. You wouldn't want a 68 swb 4x4 rolling chassis would ya? __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

05-27-2016, 07:56 AM	#10
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Big block 435 hp tri power intake and carbs GM 3919852 winters snowflake intake = 435 hp Front carb 3659 Center 4055 Rear carb 3659 No cracks, no repairs Send me some pictures of the 68 4x4 frame and what you want for it Grumpyoldmanstruckparts@gmail.com __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-28-2016, 01:15 PM	#11
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Big block 435 hp tri power intake and carbs Ttt buy it before I change my mind , I'm pretty sure I can take MRS Grumpy to dinner and increase.my budget again , and again ,and again __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop Last edited by Grumpy old man; 05-28-2016 at 10:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.