FS: 72 C10 $1000 or PARTOUT Runs WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72heavychevy · 09-30-2003, 11:27 AM

GreenMystChevy · 09-30-2003, 12:40 PM

Looks to be some good sheet metal here guys! I can't but someone will want some good stuff

imdarren · 09-30-2003, 04:38 PM

If you end up parting it out, I need a good right side (passanger side) front fender without too much rust.
I also need a 5 lug 1/2 ton coil spring rear end.
If you do end up parting it out, please let me know.
May also take a TH350 tranny if it is from a 72 and in good working order.

Thanks

Darren

72heavychevy · 09-30-2003, 06:01 PM

Hello

the truck is an leaf spring rear,
5 on 5 lug chevy 1/2
turbo 350 in the back of the vehicle are in good running order,
one pulled out of rolled over 75 blazer

anything else you guys need let me know

dinnut · 09-30-2003, 06:52 PM

how does that engine run and how much/

72heavychevy · 09-30-2003, 07:06 PM

It's a 350 out of an 1969 c10 with 49000+ original miles on it

runs very good for being old needs new valve gasket which i will include, also needs also pan gasket replaced and thats about it, give it some chrome and your set, has mild rv cam edelbrock rpm manifold, with 650 carb complete more alt. fan, steering pump and possible tranny is you want, i want 500 for the whole package

1000 for the truck two trannies, and motor

67neverdone · 09-30-2003, 11:37 PM

If you are parting it out, I may be interested in the power brake setup for the disc brakes. Please let me know what you would want. Thanks

72heavychevy · 10-01-2003, 08:01 AM

alright, if i do part it out, its a solid truck solid cab, and fenders, its a great truck to do a restore on i was going to do it, but recently got an 66gmc shortbed and 72 shortbed that me and my buddie are working on

if i do park it out, let me know and you can have it

09-30-2003, 11:27 AM	#1
72heavychevy Registered User Join Date: Sep 2003 Location: Bremerton Posts: 152	FS: 72 C10 $1000 or PARTOUT Runs WA Running 72 c10 2wd Longbed, i need to get rid off or PART OUT ASking $1000 OR PART OUT!!!! 350/350 sold cab and front fenders, sold original bed, put my other bed on there, needs bed wood, and tlc runs, healthy need more information please AOL IM at anfguy18 or contact me at anfguy18@comcast.net or through pm here here is picture of the trucks http://home.comcast.net/~anfguy18/2.JPG http://home.comcast.net/~anfguy18/3.JPG http://home.comcast.net/~anfguy18/4.JPG http://home.comcast.net/~anfguy18/5.JPG http://home.comcast.net/~anfguy18/6.JPG http://home.comcast.net/~anfguy18/7.JPG http://home.comcast.net/~anfguy18/8.JPG http://home.comcast.net/~anfguy18/9.JPG http://home.comcast.net/~anfguy18/10.JPG http://home.comcast.net/~anfguy18/11.JPG http://home.comcast.net/~anfguy18/12.JPG http://home.comcast.net/~anfguy18/13.JPG http://home.comcast.net/~anfguy18/14.JPG http://home.comcast.net/~anfguy18/15.JPG http://home.comcast.net/~anfguy18/16.JPG http://home.comcast.net/~anfguy18/17.JPG http://home.comcast.net/~anfguy18/18.JPG http://home.comcast.net/~anfguy18/19.JPG http://home.comcast.net/~anfguy18/20.JPG http://home.comcast.net/~anfguy18/21.JPG

09-30-2003, 12:40 PM	#2
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	Looks to be some good sheet metal here guys! I can't but someone will want some good stuff __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

09-30-2003, 04:38 PM	#3
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	If you end up parting it out, I need a good right side (passanger side) front fender without too much rust. I also need a 5 lug 1/2 ton coil spring rear end. If you do end up parting it out, please let me know. May also take a TH350 tranny if it is from a 72 and in good working order. Thanks Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

09-30-2003, 06:01 PM	#4
72heavychevy Registered User Join Date: Sep 2003 Location: Bremerton Posts: 152	hello, Hello the truck is an leaf spring rear, 5 on 5 lug chevy 1/2 turbo 350 in the back of the vehicle are in good running order, one pulled out of rolled over 75 blazer anything else you guys need let me know

09-30-2003, 06:52 PM	#5
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	how does that engine run and how much/ __________________ 70 longbed 496/th400/Ford 9"

09-30-2003, 07:06 PM	#6
72heavychevy Registered User Join Date: Sep 2003 Location: Bremerton Posts: 152	Whats Kinda Of Parts Do You Need?? It's a 350 out of an 1969 c10 with 49000+ original miles on it runs very good for being old needs new valve gasket which i will include, also needs also pan gasket replaced and thats about it, give it some chrome and your set, has mild rv cam edelbrock rpm manifold, with 650 carb complete more alt. fan, steering pump and possible tranny is you want, i want 500 for the whole package 1000 for the truck two trannies, and motor

09-30-2003, 11:37 PM	#7
67neverdone Registered User Join Date: Sep 2003 Location: Columbus, Indiana Posts: 68	If you are parting it out, I may be interested in the power brake setup for the disc brakes. Please let me know what you would want. Thanks

10-01-2003, 08:01 AM	#8
72heavychevy Registered User Join Date: Sep 2003 Location: Bremerton Posts: 152	hello, alright, if i do part it out, its a solid truck solid cab, and fenders, its a great truck to do a restore on i was going to do it, but recently got an 66gmc shortbed and 72 shortbed that me and my buddie are working on if i do park it out, let me know and you can have it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.