Door - Rocker space 1955(2nd) to 159 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod1 · 06-16-2016, 09:59 PM

Any please post pics or measurements of what the spacing is beneath the door to the top of the rocker?

Thanks?

pugs · 06-19-2016, 02:43 PM

I try to get my doors set up with about an 1/8th inch gap all around the door

OrrieG · 06-19-2016, 02:50 PM

What ever is left after setting the top and side gaps equal. Here are mine during initial alignment efforts. Passenger side in greater than the driver. They were all over the place from the factory. Make sure the body accent lines align, that will be more noticeable than the door bottoms.

06-16-2016, 09:59 PM	#1
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Door - Rocker space 1955(2nd) to 159 Any please post pics or measurements of what the spacing is beneath the door to the top of the rocker? Thanks?

06-19-2016, 02:43 PM	#2
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: Door - Rocker space 1955(2nd) to 159 I try to get my doors set up with about an 1/8th inch gap all around the door __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-19-2016, 02:50 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Door - Rocker space 1955(2nd) to 159 What ever is left after setting the top and side gaps equal. Here are mine during initial alignment efforts. Passenger side in greater than the driver. They were all over the place from the factory. Make sure the body accent lines align, that will be more noticeable than the door bottoms. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.