Nsane Hot Rodz- Red '65 C10 Build! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nsanehotrodz · 06-19-2016, 08:18 PM

This '65 C10 is one of our 1964-66 Chevy truck builds! The truck will be built with all of our new body panels and parts we sell. LS/4l60 engine and trans combo. Exterior will look mostly stock red/white. Here are a few pics to start.

NevEno · 06-19-2016, 09:12 PM

Looking good!! I'll be watching.

**aerotruk63** · 06-19-2016, 09:35 PM

Interesting concept.
Pricing of the new parts as you go along?

Nsanehotrodz · 06-19-2016, 09:58 PM

Quote:

Originally Posted by NevEno

Looking good!! I'll be watching.

Thanks!

Quote:

Originally Posted by aerotruk63

Interesting concept.
Pricing of the new parts as you go along?

Check out nsanehotrodz.com for prices. If you have any questions feel free to ask about specific parts. I have way to many parts on this truck to price everything on here. Thanks

**66ChevyMax** · 06-20-2016, 11:14 AM

Subscribed, unique rear tire

Nsanehotrodz · 06-20-2016, 11:59 AM

Quote:

Originally Posted by 66ChevyMax

Subscribed, unique rear tire

Thanks, this rear tire is a Nitto invo. It's the closest tire we could get to run a 14" wide wheel in the rear.

timmytimm3 · 06-20-2016, 03:16 PM

Quote:

Originally Posted by Nsanehotrodz

Thanks, this rear tire is a Nitto invo. It's the closest tire we could get to run a 14" wide wheel in the rear.

What size are they? Trailing arms and coils?

Looks great so far.

Thanks

chad64chevy · 06-20-2016, 05:40 PM

how does the gap on the front fenders look? I have two passenger fenders an both are bad, you can see daylight thru the gap! also what do the doors look like? how is the fitment on them? I mean from where I'm sitting they all look good, close-ups would help thanks! tuned in for this build, I love the fact that you are using the parts your selling

Nsanehotrodz · 06-20-2016, 09:15 PM

Quote:

Originally Posted by timmytimm3

What size are they? Trailing arms and coils?

Looks great so far.

Thanks

345/25/20 with 4-Link and coilovers!

Quote:

Originally Posted by chad64chevy

how does the gap on the front fenders look? I have two passenger fenders an both are bad, you can see daylight thru the gap! also what do the doors look like? how is the fitment on them? I mean from where I'm sitting they all look good, close-ups would help thanks! tuned in for this build, I love the fact that you are using the parts your selling

I will post close up pics tomorrow. Our aftermarket doors are better than originals and seal up really well with the press on door seals! Thanks

Nsanehotrodz · 06-20-2016, 09:30 PM

More pics

timmytimm3 · 06-21-2016, 07:48 AM

Quote:

Originally Posted by Nsanehotrodz

345/25/20 with 4-Link and coilovers!

Stock frame rails? I'm running a Porterbuilt 4 link and coilovers. I'm note sure I could fit that wide of a tire. Are you fabbing the 4 link or is it a vendors design?

Thanks

Nsanehotrodz · 06-21-2016, 07:57 AM

Quote:

Originally Posted by timmytimm3

Stock frame rails? I'm running a Porterbuilt 4 link and coilovers. I'm note sure I could fit that wide of a tire. Are you fabbing the 4 link or is it a vendors design?

Thanks

We are building our own 4-link for this truck.

mooseknuckles · 06-27-2016, 08:45 PM

sweet build!

Nsanehotrodz · 06-27-2016, 10:01 PM

Quote:

Originally Posted by mooseknuckles

sweet build!

Thanks! Our new Griffin radiator came in this week!

**DPowers** · 06-27-2016, 10:22 PM

Ill be watching.

**66ChevyMax** · 06-27-2016, 11:38 PM

I'm watching as well

Nsanehotrodz · 06-30-2016, 11:21 PM

Quote:

Originally Posted by DPowers

Ill be watching.

Quote:

Originally Posted by 66ChevyMax

I'm watching as well

Thanks, today I started welding and grinding all of the bed seams on our new bed kit! Every seam on this truck will be fully welded. I also have to add that my son Dylan won his second Burris Cup Gold Series race over the weekend! We're all very excited to see him leading the points series!!

**DPowers** · 07-01-2016, 08:51 AM

Woop woop Dylan

**66ChevyMax** · 07-01-2016, 09:10 AM

Awesome look on the bed, Congrats to your son!

Nsanehotrodz · 07-19-2016, 05:28 PM

I've been working on shaving all of the holes and seams on our new bed sides. Here are a few pics...

**lolife99** · 07-19-2016, 05:35 PM

Such nice work!

Nsanehotrodz · 07-20-2016, 08:27 AM

Quote:

Originally Posted by lolife99

Such nice work!

Thanks Keith!

casey g · 07-23-2016, 06:10 AM

can I ask what technique you will be using to weld the seem that runs the length of the bed? I guess im asking how will you grind your weld.

Nsanehotrodz · 07-31-2016, 12:12 PM

Quote:

Originally Posted by casey g

can I ask what technique you will be using to weld the seem that runs the length of the bed? I guess im asking how will you grind your weld.

I use a 36 grit grinding disc. We have started building a new set of wheel tubs for the 14" wheels. We are using Jasons orange '65 C10 to build the new tubs. Here are a couple pics. I still need to move the bodyline for the second bed strip, but this gives you an idea of the look we are going for.

**Advanced Design** · 07-31-2016, 12:24 PM

Great work as always!

Where did the wheel measuring tool shown in this picture come from? I've never seen one and it looks light years better than my Percy Wheelwright.

06-19-2016, 08:18 PM	#1
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Nsane Hot Rodz- Red '65 C10 Build! This '65 C10 is one of our 1964-66 Chevy truck builds! The truck will be built with all of our new body panels and parts we sell. LS/4l60 engine and trans combo. Exterior will look mostly stock red/white. Here are a few pics to start. __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

06-19-2016, 09:12 PM	#2
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Nsane Hot Rodz- Red '65 C10 Build! Looking good!! I'll be watching. __________________ You can find me on Instagram @neveno_cten

06-19-2016, 09:35 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Nsane Hot Rodz- Red '65 C10 Build! Interesting concept. Pricing of the new parts as you go along? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-20-2016, 11:14 AM	#5
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Nsane Hot Rodz- Red '65 C10 Build! Subscribed, unique rear tire __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

06-20-2016, 05:40 PM	#8
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Nsane Hot Rodz- Red '65 C10 Build! how does the gap on the front fenders look? I have two passenger fenders an both are bad, you can see daylight thru the gap! also what do the doors look like? how is the fitment on them? I mean from where I'm sitting they all look good, close-ups would help thanks! tuned in for this build, I love the fact that you are using the parts your selling __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

06-20-2016, 09:30 PM	#10
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane Hot Rodz- Red '65 C10 Build! More pics __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

06-27-2016, 08:45 PM	#13
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Nsane Hot Rodz- Red '65 C10 Build! sweet build! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

06-27-2016, 10:22 PM	#15
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: Nsane Hot Rodz- Red '65 C10 Build! Ill be watching. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

06-27-2016, 11:38 PM	#16
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Nsane Hot Rodz- Red '65 C10 Build! I'm watching as well __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

07-01-2016, 08:51 AM	#18
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: Nsane Hot Rodz- Red '65 C10 Build! Woop woop Dylan __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

07-01-2016, 09:10 AM	#19
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Nsane Hot Rodz- Red '65 C10 Build! Awesome look on the bed, Congrats to your son! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

07-19-2016, 05:28 PM	#20
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane Hot Rodz- Red '65 C10 Build! I've been working on shaving all of the holes and seams on our new bed sides. Here are a few pics... __________________ www.nsanehotrodz.com customerservice@nsanehotrodz.com 865-761-0460 Tennessee's #1 HotRod Shop!

07-19-2016, 05:35 PM	#21
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Nsane Hot Rodz- Red '65 C10 Build! Such nice work! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-23-2016, 06:10 AM	#23
casey g Registered User Join Date: Oct 2011 Location: Coeur d'alene ID Posts: 509	Re: Nsane Hot Rodz- Red '65 C10 Build! can I ask what technique you will be using to weld the seem that runs the length of the bed? I guess im asking how will you grind your weld.

07-31-2016, 12:24 PM	#25
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Nsane Hot Rodz- Red '65 C10 Build! Great work as always! Where did the wheel measuring tool shown in this picture come from? I've never seen one and it looks light years better than my Percy Wheelwright. Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.