400" 4-Bolt with .030" over Forged TRW's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GSXMEN · 10-01-2003, 11:52 PM

I have a 400" 4-bolt main shortblock with the following done to it:

*.030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads]
*400" crank turned .010"/.010"
*400" rods resized
*Pistons installed on rods
*Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268* Lift: .450" w/1.5 ratio]
*New cam, main, rod bearings & rings
*Cam bearings installed

**Price $1000 plus shipping**

Price reduced to $800 - $750 without cam

GSXMEN · 10-04-2003, 10:48 PM

TTT

padreisla · 10-05-2003, 03:24 PM

Hey Scott, how much do you think shipping to Tampa, Fl 33617 would be. I may need to replace my 402 and not sure which route I am going to take.

Joey

GSXMEN · 10-05-2003, 11:43 PM

I would have to get a direct quote from Yellow Freight, but I would guess it would be similar to the 402 block w/ heads that I just shipped out to the mid-west. That was only $99...about 350lbs.

That would be going to a Business address, correct? (I think it's $149 to a residential address).

GSXMEN · 10-07-2003, 12:18 AM

Well...I called Yellow Freight today, the girl quoted me some absurd price - $350 (and that was at a 40% 'discount').

My zip is 13901 - see what you can find on your end. I'll keep checking around here.

I don't know how the last guy got a quote of $99...must have some good connections.

Anybody got any suggestions?

Thanks

padreisla · 10-07-2003, 12:21 AM

Ok, will check tomorrow and see what I can find out. Also curious to see what ideas the other board members have.

Thanks...Joey

Bowtiefreak · 10-07-2003, 07:31 AM

You can save alot of money sometimes by shipping on a major airline. Just trying help you guys out.

GSXMEN · 10-10-2003, 11:18 AM

TTT

GSXMEN · 10-21-2003, 11:35 PM

Joey - Have you found any decent shipping options on your end?

padreisla · 10-22-2003, 09:16 AM

Scott, sorry for not getting back with you sooner. I checked with a couple of local shippers and also a friend of mine who hauls cars across the US and no luck. Either the shipping was going to be too much or they were not available. I had not been able to find a better deal, so a friend of mine has a new crate 454 long block for $1350 so we are putting it in this weekend.

Again sorry for not getting back with you sooner and letting you know.

Thanks....Joey

GSXMEN · 10-22-2003, 03:02 PM

No problem! I may have someone else interested...since you asked first, thought I'd check with you.

Nothing definite yet though, if anyone else is interested.

Thanks

GSXMEN · 10-31-2003, 02:24 AM

Just want to bring this back up top.

Anyone in the NY, NJ, PA area that might be interested, I'd be glad to do a little driving to help eliminate shipping costs (depending on how far away).

cwilli84 · 10-31-2003, 08:17 AM

You should to talk to Ed at Mothertruckers he sends a truck up and down the east coast pretty regularly he may be able to cut you a deal and he's in Bradenton which I think is not too far from TAmpa. Just a thought.

charlieo · 11-02-2003, 12:34 AM

Try freightquote.com

GSXMEN · 11-10-2003, 12:30 AM

Still available guys.

Thanks.

GSXMEN · 11-19-2003, 01:10 AM

Dropping price to $950.

GSXMEN · 11-19-2003, 01:49 AM

Quote:

Originally posted by charlieo
Try freightquote.com

Thanks for the heads up...finally tried their site - they had some decent rates available.

I tried a quote to Tamp, FL just for a figure...$92-$135 depending on carrier. CFI was cheapest, Roadway wasn't too bad either.

GSXMEN · 01-15-2004, 01:31 AM

Still have this shortblock for sale also.

For a ball park price on shipping - I recently got a quote for $100-$120 to Ohio and $220 to CA. That should give some idea on price.

Need to sell this soon. Thanks.

GSXMEN · 01-17-2004, 05:28 PM

Really need to sell this.

Thanks for looking.

Blue'66 · 01-17-2004, 06:42 PM

What is the bottom line on the engine? I am in western NY, near Batavia. I could come and get it. Are you looking for any trades? Please e-mail me at jwasmus@juno.com.

I am interested in it.

Thanks
-John

SCOTI · 01-17-2004, 08:05 PM

This might sound like a dumb question, but some consider a short block as a rotating assembly w/o heads/induction, weather it's put together or not. Is it assembled?

GSXMEN · 01-18-2004, 04:13 PM

John - Sent you a PM.

Scoti - It is currently unassembled. Pistons are hung on the rods though.

All parts are listed in the first post. If anyone wants it minus the cam - $50 less.

Thanks

GSXMEN · 01-28-2004, 06:30 PM

Back up top. Really need to sell this soon.

Thanks.

bad 71 chevy · 01-28-2004, 10:24 PM

Just wondering on shipping to 81303 thanks if it would not be to much i might be inerested thanks

GSXMEN · 01-29-2004, 12:23 AM

According to freightquote.com it should be about $200 to your zip.

Let me know. Thanks.

10-01-2003, 11:52 PM	#1
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	400" 4-Bolt with .030" over Forged TRW's I have a 400" 4-bolt main shortblock with the following done to it: .030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads] 400" crank turned .010"/.010" 400" rods resized Pistons installed on rods Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268 Lift: .450" w/1.5 ratio] New cam, main, rod bearings & rings Cam bearings installed Price $1000 plus shipping Price reduced to $800 - $750 without cam __________________ Scott Last edited by GSXMEN; 10-25-2004 at 03:59 PM. Reason: Price Change

10-04-2003, 10:48 PM	#2
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	TTT __________________ Scott

10-05-2003, 03:24 PM	#3
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	Shipping Hey Scott, how much do you think shipping to Tampa, Fl 33617 would be. I may need to replace my 402 and not sure which route I am going to take. Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

10-05-2003, 11:43 PM	#4
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	I would have to get a direct quote from Yellow Freight, but I would guess it would be similar to the 402 block w/ heads that I just shipped out to the mid-west. That was only $99...about 350lbs. That would be going to a Business address, correct? (I think it's $149 to a residential address). __________________ Scott

10-07-2003, 12:18 AM	#5
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Well...I called Yellow Freight today, the girl quoted me some absurd price - $350 (and that was at a 40% 'discount'). My zip is 13901 - see what you can find on your end. I'll keep checking around here. I don't know how the last guy got a quote of $99...must have some good connections. Anybody got any suggestions? Thanks __________________ Scott

10-07-2003, 12:21 AM	#6
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	Shipping Ok, will check tomorrow and see what I can find out. Also curious to see what ideas the other board members have. Thanks...Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

10-07-2003, 07:31 AM	#7
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	You can save alot of money sometimes by shipping on a major airline. Just trying help you guys out. __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

10-10-2003, 11:18 AM	#8
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	TTT __________________ Scott

10-21-2003, 11:35 PM	#9
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Joey - Have you found any decent shipping options on your end? __________________ Scott

10-22-2003, 09:16 AM	#10
padreisla Registered User Join Date: Jan 2003 Location: Tampa, Florida Posts: 141	Shipping Scott, sorry for not getting back with you sooner. I checked with a couple of local shippers and also a friend of mine who hauls cars across the US and no luck. Either the shipping was going to be too much or they were not available. I had not been able to find a better deal, so a friend of mine has a new crate 454 long block for $1350 so we are putting it in this weekend. Again sorry for not getting back with you sooner and letting you know. Thanks....Joey __________________ 67 C20 LWB 454 BB THD 400 97 Jeep Wrangler 4cyl 5sp

10-22-2003, 03:02 PM	#11
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	No problem! I may have someone else interested...since you asked first, thought I'd check with you. Nothing definite yet though, if anyone else is interested. Thanks __________________ Scott

10-31-2003, 02:24 AM	#12
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Just want to bring this back up top. Anyone in the NY, NJ, PA area that might be interested, I'd be glad to do a little driving to help eliminate shipping costs (depending on how far away). __________________ Scott

10-31-2003, 08:17 AM	#13
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Shipping You should to talk to Ed at Mothertruckers he sends a truck up and down the east coast pretty regularly he may be able to cut you a deal and he's in Bradenton which I think is not too far from TAmpa. Just a thought. __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD

11-02-2003, 12:34 AM	#14
charlieo Registered User Join Date: Feb 2003 Location: sw Posts: 341	shipping Try freightquote.com

11-10-2003, 12:30 AM	#15
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Still available guys. Thanks. __________________ Scott



Register or Log In To remove these advertisements.

11-19-2003, 01:10 AM	#16
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Dropping price to $950. __________________ Scott

01-15-2004, 01:31 AM	#18
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Still have this shortblock for sale also. For a ball park price on shipping - I recently got a quote for $100-$120 to Ohio and $220 to CA. That should give some idea on price. Need to sell this soon. Thanks. __________________ Scott

01-17-2004, 05:28 PM	#19
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Really need to sell this. Thanks for looking. __________________ Scott

01-17-2004, 06:42 PM	#20
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	What is the bottom line on the engine? I am in western NY, near Batavia. I could come and get it. Are you looking for any trades? Please e-mail me at jwasmus@juno.com. I am interested in it. Thanks -John __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.

01-17-2004, 08:05 PM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	This might sound like a dumb question, but some consider a short block as a rotating assembly w/o heads/induction, weather it's put together or not. Is it assembled? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-18-2004, 04:13 PM	#22
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	John - Sent you a PM. Scoti - It is currently unassembled. Pistons are hung on the rods though. All parts are listed in the first post. If anyone wants it minus the cam - $50 less. Thanks __________________ Scott

01-28-2004, 06:30 PM	#23
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Back up top. Really need to sell this soon. Thanks. __________________ Scott

01-28-2004, 10:24 PM	#24
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Just wondering on shipping to 81303 thanks if it would not be to much i might be inerested thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

01-29-2004, 12:23 AM	#25
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	According to freightquote.com it should be about $200 to your zip. Let me know. Thanks. __________________ Scott

Register or Log In To remove these advertisements.