What Year and What's It Worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stesch_c10 · 06-30-2016, 04:36 PM

Got an opportunity to buy a GMC truck and I'm wondering what year it is for sure and roughly how much its worth. Guy said to make an offer.

It's got a v6, few windows broken, unsure if motor is stuck or not. bed it shot. Inside floor looks pretty good, not rusted through. Few fenders are rusted bad but... Any help would be appreciated guys.

Samz · 06-30-2016, 04:43 PM

Looks like a '60 with a different hood. What it's worth? Hard to say. Does it have good/clean title? Something like that here is Az would probably go for about 1500 or so if the title is good. I've seen a few go for less that 1K out here too. I guess it comes down to what you're willing to pay, knowing about how much you'll have to put into her. That's of course just my guess. Good luck...

stesch_c10 · 06-30-2016, 05:06 PM

I think I broke the VIN down correctly and I think it's a 62. 1000 series with a 127" wheelbase.

**TJ's Chevy** · 06-30-2016, 05:32 PM

$500 with a title.

**TJ's Chevy** · 06-30-2016, 05:35 PM

Sounds more like it. On the engine, there is a number stamped on the front of the block behind the fuel pump near the thermostat housing. It will say what
v6 it is.

http://www.6066gmcguy.com/EngineData.html

62stepside longbox · 06-30-2016, 07:15 PM

Quote:

Originally Posted by stesch_c10

I think I broke the VIN down correctly and I think it's a 62. 1000 series with a 127" wheelbase.

wrap around windshield with clear signal lights on a 62-66 hood, definitely a 62 if parts haven't been changed up

**DPowers** · 06-30-2016, 08:13 PM

Depends alot on what you are looking for? One to fix/restore or to part out. If it was in East TN, I would offer $300 but wouldn't go over $500.

stesch_c10 · 06-30-2016, 10:06 PM

I already have my grandpas 64 c10 and don't "need" another but my brother is interested in it. He doesn't want to do a frame off restoration, but wouldn't mind getting it running and driving. leaving the paint and dents and such.

71swb4x4 · 06-30-2016, 10:28 PM

Welcome to the board, from a little SE of you. I also think it's worth $500 max. Is there is a straight panel on it? Looks like it will take a lot of body work, and that's where most people struggle.

stesch_c10 · 06-30-2016, 11:03 PM

Ehh not many straight panels. But I/my brother don't mind a few dents. I think its too hard to keep stuff absolutely clean and straight. Everytime a bird craps on it I wouldn't be afraid to let it sit.

**TJ's Chevy** · 06-30-2016, 11:25 PM

Quote:

Originally Posted by stesch_c10

I already have my grandpas 64 c10 and don't "need" another but my brother is interested in it. He doesn't want to do a frame off restoration, but wouldn't mind getting it running and driving. leaving the paint and dents and such.

Neat thing is that if it has the original V6....it'll last quite awhile if taken care of. I know a guy who has a 305 V6 powered truck with 600,000 on it!

61_FL_Apache · 07-01-2016, 07:28 PM

How bout that Pinto wagon?

06-30-2016, 04:36 PM	#1
stesch_c10 Registered User Join Date: Apr 2016 Location: Redfield SD Posts: 57	What Year and What's It Worth? Got an opportunity to buy a GMC truck and I'm wondering what year it is for sure and roughly how much its worth. Guy said to make an offer. It's got a v6, few windows broken, unsure if motor is stuck or not. bed it shot. Inside floor looks pretty good, not rusted through. Few fenders are rusted bad but... Any help would be appreciated guys.

06-30-2016, 04:43 PM	#2
Samz Registered User Join Date: Mar 2016 Location: Arizona Posts: 36	Re: What Year and What's It Worth? Looks like a '60 with a different hood. What it's worth? Hard to say. Does it have good/clean title? Something like that here is Az would probably go for about 1500 or so if the title is good. I've seen a few go for less that 1K out here too. I guess it comes down to what you're willing to pay, knowing about how much you'll have to put into her. That's of course just my guess. Good luck... __________________ 1960 C10, shortbed, step side, big back window, 350, Turbo 400

06-30-2016, 05:06 PM	#3
stesch_c10 Registered User Join Date: Apr 2016 Location: Redfield SD Posts: 57	Re: What Year and What's It Worth? I think I broke the VIN down correctly and I think it's a 62. 1000 series with a 127" wheelbase.

06-30-2016, 05:32 PM	#4
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What Year and What's It Worth? $500 with a title. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-30-2016, 05:35 PM	#5
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What Year and What's It Worth? Sounds more like it. On the engine, there is a number stamped on the front of the block behind the fuel pump near the thermostat housing. It will say what v6 it is. http://www.6066gmcguy.com/EngineData.html __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-30-2016, 08:13 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,440	Re: What Year and What's It Worth? Depends alot on what you are looking for? One to fix/restore or to part out. If it was in East TN, I would offer $300 but wouldn't go over $500. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

06-30-2016, 10:06 PM	#8
stesch_c10 Registered User Join Date: Apr 2016 Location: Redfield SD Posts: 57	Re: What Year and What's It Worth? I already have my grandpas 64 c10 and don't "need" another but my brother is interested in it. He doesn't want to do a frame off restoration, but wouldn't mind getting it running and driving. leaving the paint and dents and such.

06-30-2016, 10:28 PM	#9
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: What Year and What's It Worth? Welcome to the board, from a little SE of you. I also think it's worth $500 max. Is there is a straight panel on it? Looks like it will take a lot of body work, and that's where most people struggle. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

06-30-2016, 11:03 PM	#10
stesch_c10 Registered User Join Date: Apr 2016 Location: Redfield SD Posts: 57	Re: What Year and What's It Worth? Ehh not many straight panels. But I/my brother don't mind a few dents. I think its too hard to keep stuff absolutely clean and straight. Everytime a bird craps on it I wouldn't be afraid to let it sit.

07-01-2016, 07:28 PM	#12
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: What Year and What's It Worth? How bout that Pinto wagon? __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.