IL Parting a '70 LWB and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

projectking · 07-28-2016, 02:43 PM

'70 Chevy c10 LWB
Some items are listed/priced below anything else just ask.

Header panel wood floor $50
Rear brace wood floor $30
Wheel tubs $100
'68 DS fender $70 (pending)
Cowl $40
67/68 hood $75
69-72 hood $50
69-72 fenders need rust repair $60 pr.
Nice original paint doors $250 pr. (Pending)
"Red" doors $100 pr.

I'll list more/update as things come available I'm building two trucks and will have more to come as things get completed.

Thanks,
Jon

**georgieb51** · 07-28-2016, 02:45 PM

Is this GMC or Chevy? 1/2 ton or 3/4 ton? Cheyenne/CST? Looking for a few SS items (windshield trim, 3/4 hubcaps). Thanks.

projectking · 07-28-2016, 03:00 PM

Chevy, no special trim package. I also have some GMC items but not too sure I'm ready to part with them.

**Dustmaker65** · 07-28-2016, 05:42 PM

How is the 67/68 hood? Any rust issues? Pics?

projectking · 07-28-2016, 06:12 PM

Some rust on the leading edge. I'll get you a pic

**70STOVEBOLT** · 07-28-2016, 07:47 PM

Original paint doors, do they have rust holes in the bottoms? If not I will say I will take them for $250 and I can pick up. could you post some more pics or email them?

Thanks,
Mark

projectking · 07-28-2016, 10:00 PM

The drivers door has a small spot in the inner corner that needs repair, passenger is very nice. 150 for pass 100 driver is how I priced them.

projectking · 07-28-2016, 10:06 PM

Dustmaker I'll get pics for you tomorrow, sorry for the delay.

**Dustmaker65** · 07-28-2016, 10:25 PM

Quote:

Originally Posted by projectking

Dustmaker I'll get pics for you tomorrow, sorry for the delay.

Sounds good!

Thanks!
Jimmy

ryans69chevy · 07-28-2016, 10:50 PM

Interested in the wood floor header panel and rear brace. Also any of the floor bracing if any good. Looking for pics as well as shipping to 58103.

Thanks,
Ryan

**1968k20** · 07-28-2016, 11:25 PM

Dirts72 was looking for a dark Olive fender

projectking · 07-29-2016, 05:41 AM

Quote:

Originally Posted by ryans69chevy

Interested in the wood floor header panel and rear brace. Also any of the floor bracing if any good. Looking for pics as well as shipping to 58103.

Thanks,
Ryan

There still attached, I'll get you pics today. I have all the bracing from a longhorn bed.

projectking · 07-29-2016, 05:42 AM

Quote:

Originally Posted by 1968k20

Dirts72 was looking for a dark Olive fender

I'll send him a pm today thanks.

projectking · 07-29-2016, 06:16 AM

Quote:

Originally Posted by 1968k20

Dirts72 was looking for a dark Olive fender

I'll send him a pm today thanks.

Bennett68C10 · 07-29-2016, 08:22 AM

Any pics of the passenger side 68 fender? I'm looking for a good one.

projectking · 07-29-2016, 08:53 AM

The passenger fender is the green GMC.

**70STOVEBOLT** · 07-29-2016, 09:40 AM

Thank you for the pics of the doors. I am going to pass, mine are about the same shape.

Dirt's72 · 07-29-2016, 09:45 AM

Quote:

Originally Posted by projectking

I'll send him a pm today thanks.

I will take the green fender and can pick it up from you. Thank you.

jaybatta · 07-29-2016, 10:36 AM

Want to sell the 20 emblem? What the price shipped to Missoula, MT 59803? Thank you,

Joe

projectking · 07-29-2016, 11:27 AM

Quote:

Originally Posted by 70STOVEBOLT

Thank you for the pics of the doors. I am going to pass, mine are about the same shape.

No problem, thanks for the reply.

projectking · 07-29-2016, 11:30 AM

Quote:

Originally Posted by Dirt's72

I will take the green fender and can pick it up from you. Thank you.

Pm'ed you my #, it's yours. Thanks!

projectking · 07-29-2016, 11:32 AM

Quote:

Originally Posted by jaybatta

Want to sell the 20 emblem? What the price shipped to Missoula, MT 59803? Thank you,

Joe

Sorry, should have mentioned the hinges and emblem are not for sale, I need them for another project.

jaybatta · 07-29-2016, 11:35 AM

Ok thanks anyhow

projectking · 07-29-2016, 11:49 AM

Doors are pending till Sunday I'll update at that time.

**Dustmaker65** · 07-29-2016, 02:16 PM

Quote:

Originally Posted by projectking

Dustmaker I'll get pics for you tomorrow, sorry for the delay.

Any chance to get pics of hood yet?

Thanks!
Jimmy

07-28-2016, 02:43 PM	#1
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Parting a '70 LWB and more '70 Chevy c10 LWB Some items are listed/priced below anything else just ask. Header panel wood floor $50 Rear brace wood floor $30 Wheel tubs $100 '68 DS fender $70 (pending) Cowl $40 67/68 hood $75 69-72 hood $50 69-72 fenders need rust repair $60 pr. Nice original paint doors $250 pr. (Pending) "Red" doors $100 pr. I'll list more/update as things come available I'm building two trucks and will have more to come as things get completed. Thanks, Jon __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback Last edited by projectking; 07-30-2016 at 12:48 PM. Reason: Updated

07-28-2016, 02:45 PM	#2
georgieb51 Senior Member Join Date: Aug 2014 Location: cooperstown. ny Posts: 1,573	Re: Parting a '70 LWB and more Is this GMC or Chevy? 1/2 ton or 3/4 ton? Cheyenne/CST? Looking for a few SS items (windshield trim, 3/4 hubcaps). Thanks.

07-28-2016, 03:00 PM	#3
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more Chevy, no special trim package. I also have some GMC items but not too sure I'm ready to part with them. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-28-2016, 05:42 PM	#4
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Re: Parting a '70 LWB and more How is the 67/68 hood? Any rust issues? Pics? __________________ Jimmy Hoelzel

07-28-2016, 06:12 PM	#5
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more Some rust on the leading edge. I'll get you a pic __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-28-2016, 07:47 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting a '70 LWB and more Original paint doors, do they have rust holes in the bottoms? If not I will say I will take them for $250 and I can pick up. could you post some more pics or email them? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-28-2016, 10:00 PM	#7
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more The drivers door has a small spot in the inner corner that needs repair, passenger is very nice. 150 for pass 100 driver is how I priced them. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-28-2016, 10:06 PM	#8
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more Dustmaker I'll get pics for you tomorrow, sorry for the delay. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-28-2016, 10:50 PM	#10
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,072	Re: Parting a '70 LWB and more Interested in the wood floor header panel and rear brace. Also any of the floor bracing if any good. Looking for pics as well as shipping to 58103. Thanks, Ryan

07-28-2016, 11:25 PM	#11
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Parting a '70 LWB and more Dirts72 was looking for a dark Olive fender __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

07-29-2016, 08:22 AM	#15
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Parting a '70 LWB and more Any pics of the passenger side 68 fender? I'm looking for a good one. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-29-2016, 08:53 AM	#16
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more The passenger fender is the green GMC. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-29-2016, 09:40 AM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Parting a '70 LWB and more Thank you for the pics of the doors. I am going to pass, mine are about the same shape. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-29-2016, 10:36 AM	#19
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: Parting a '70 LWB and more Want to sell the 20 emblem? What the price shipped to Missoula, MT 59803? Thank you, Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

07-29-2016, 11:35 AM	#23
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: Parting a '70 LWB and more Ok thanks anyhow __________________ Joe 1968 K20 1970 K20 Semper Fi



Register or Log In To remove these advertisements.

07-29-2016, 11:49 AM	#24
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting a '70 LWB and more Doors are pending till Sunday I'll update at that time. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

Register or Log In To remove these advertisements.