CA WTB: 396 Clutch kit and Flywheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ghalperin · 07-29-2016, 10:43 AM

My 1969 396 has a flexplate. I'm collecting parts to convert it to manual trans.

I need everthing from the flywheel to the pilot bearing, including all the bolts. Everthing needs to be in very good to near new condition.

Thanks in advance for any leads.

*randy500* · 07-29-2016, 12:45 PM

All that stuff is available new, check rockauto, I have never looked for the pressure plate bolts but am sure they are available. All that stuff is the same as small block too. If you want used I probably have a new bronze pilot bearing and flywheel and pressure plate bolts. I also have a 4spd truck that is still complete that I am parting out.

07-29-2016, 10:43 AM	#1
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	WTB: 396 Clutch kit and Flywheel My 1969 396 has a flexplate. I'm collecting parts to convert it to manual trans. I need everthing from the flywheel to the pilot bearing, including all the bolts. Everthing needs to be in very good to near new condition. Thanks in advance for any leads. __________________ Glenn 1960 Burro Corvair/VW Buggy - Factory made in Santa Ana, Ca 1929 Ford Model A Roadster - traditional pre-war banger hot rod

07-29-2016, 12:45 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB: 396 Clutch kit and Flywheel All that stuff is available new, check rockauto, I have never looked for the pressure plate bolts but am sure they are available. All that stuff is the same as small block too. If you want used I probably have a new bronze pilot bearing and flywheel and pressure plate bolts. I also have a 4spd truck that is still complete that I am parting out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.