NM WTB: working low note horn w dual horn pigtail

[DeadheadNM]

Chasing a working low note horn in good condition with attachment bolt and the green pigtail harness for a dual horn setup. Thanks, Pete

[John H.]

Pete,

I have a few. Do you have any high notes that work?

Let me get some pictures.

John

[DeadheadNM]

John thanks so much. I'd take a low note horn. The one horn in the blazer was the high note and it works. LMK when you can. Thanks Pete

[Classic Bowties]

Hi Pete, per our earlier communication here on the board last week and your phone message left Sat., just wanted to let you know that I hadn't forgot about this horn stuff or the A.I.R./smog stuff, just had no extra time over this last weekend to look for parts or to check/test horns. I pulled the discussed small block smog stuff out (will post in your other thread) and also tested some horns on Monday, we currently have these four working low note horns and six dual horn wire harnesses. John always has nice clean parts so lets see what he offers you from his above post. Sorry for the delay, Mel.

[DeadheadNM]

Mel thanks so much! Hold a good example of each for me please for 24 hrs pending a reply from John. Pete

[John H.]

Pete,

I believe the low note horns have the longer bracket. I will include a redone bolt from Kaer

The close up is a nice one. I tested these a couple years ago and will retest before I would ship.

Let me know.

[DeadheadNM]

John I'll take your best horn/harness. Thank you. Sending PM.

Thanks Mel - I'll take the smog equip.