used valve covers needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 10-06-2003, 02:31 PM

i am looking for a set of painted / paintable vintage valve covers for my 327. no pcv or oil fill holes. would prefer the raised chevrolet lettering. i have a pair on there now, but PO had one of the covers on upside down and the rockers had been beaten against the sides where it cracked.

has chevy or any other company reproduced these?

**Ironhorse** · 10-06-2003, 04:40 PM

bucket, not sure if they have been reproduced or not but I think I have a set of raised letter "Chevrolet" script setting in the parts shed. Will look and let you know for sure this evening. I'm sure they would need blasted, primed and re-painted to look good but no rust or tears that I know of. Let you know later this evening. I'm even "somewhat" local being just south of Wichita.

**Ironhorse** · 10-06-2003, 09:38 PM

bucket, I found the "Chevrolet" script sbc valve covers, usual amount of dirt and crud inside, several coats of paint and some minor dings. Nothing serious. Drivers' side with the tabs for engine wire, passenger side is without tab. Would clean up good with a little TLC. Looked through all my catalogs and closest re-pops I could find was by Classic Industries in Huntington Beach, Cal. Plain cast steel, no script, $129 pair, polished chrome, no script, $139 pair. No holes in the covers, solid, fits 55-67 327 sbc. Mine aren't near that nice or that price either ! PM me if interested.

fatfords · 10-07-2003, 03:44 PM

Bucket,
I have these laying around the garage. They don't have the script, but they are for a 327 with no PCV or oil fill holes. E-mail me if you are interested.

gregsplace · 10-08-2003, 08:50 PM

I have several sets of "chevrolet" embossed valve covers.$25 plus shipping.

danho · 10-08-2003, 09:10 PM

gregsplace, you have a pm.

bucket · 10-09-2003, 09:50 AM

thanks guys.

i found a pair here locally. i don't even have to paint them

**Ironhorse** · 10-09-2003, 05:18 PM

bucket, Guess you found what you are needing so anyone else need a pair of the Chevrolet scripted valve covers? Couple dings, nothing serious, no rust or cuts. $25 plus shipping.

10-06-2003, 02:31 PM	#1
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	used valve covers needed i am looking for a set of painted / paintable vintage valve covers for my 327. no pcv or oil fill holes. would prefer the raised chevrolet lettering. i have a pair on there now, but PO had one of the covers on upside down and the rockers had been beaten against the sides where it cracked. has chevy or any other company reproduced these?

10-06-2003, 04:40 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,337	bucket, not sure if they have been reproduced or not but I think I have a set of raised letter "Chevrolet" script setting in the parts shed. Will look and let you know for sure this evening. I'm sure they would need blasted, primed and re-painted to look good but no rust or tears that I know of. Let you know later this evening. I'm even "somewhat" local being just south of Wichita. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-06-2003, 09:38 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,337	bucket, I found the "Chevrolet" script sbc valve covers, usual amount of dirt and crud inside, several coats of paint and some minor dings. Nothing serious. Drivers' side with the tabs for engine wire, passenger side is without tab. Would clean up good with a little TLC. Looked through all my catalogs and closest re-pops I could find was by Classic Industries in Huntington Beach, Cal. Plain cast steel, no script, $129 pair, polished chrome, no script, $139 pair. No holes in the covers, solid, fits 55-67 327 sbc. Mine aren't near that nice or that price either ! PM me if interested. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-07-2003, 03:44 PM	#4
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	Bucket, I have these laying around the garage. They don't have the script, but they are for a 327 with no PCV or oil fill holes. E-mail me if you are interested. Attached Images __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

10-08-2003, 08:50 PM	#5
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	I have several sets of "chevrolet" embossed valve covers.$25 plus shipping. __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

10-08-2003, 09:10 PM	#6
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	gregsplace, you have a pm.

10-09-2003, 09:50 AM	#7
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	thanks guys. i found a pair here locally. i don't even have to paint them

10-09-2003, 05:18 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,337	bucket, Guess you found what you are needing so anyone else need a pair of the Chevrolet scripted valve covers? Couple dings, nothing serious, no rust or cuts. $25 plus shipping. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.