OR WTB shim plates for manual trans

[TBONE1964]

Would like to purchase 2 or 3 manual trans shim plates. Preferably from the same seller if possible.

Actually I need them for starter shims and you can cut them off as all I need is the portion that fits behind the starter. This is for the starter that bolts to the bell housing.

Please provide a price shipped to 97448 and a photo if possible.

Thank you in advance,
Tom

[randy500]

tell me what you need these for please. I have the cover plate out there I had to cut the bolt with a torch because I forgot to remove the small bolts before I pulled the engine 4 spd right? The part is free, u just pay shipping, send phone number and I will text you a pic

[TBONE1964]

Originally Posted by randy500

tell me what you need these for please. I have the cover plate out there I had to cut the bolt with a torch because I forgot to remove the small bolts before I pulled the engine 4 spd right? The part is free, u just pay shipping, send phone number and I will text you a pic

I am using them to shim a starter on a 1940 Ford that has an adapter plate to use a 40 Ford trans to a small block chevy engine. The combination uses a starter with the manual style nose cone. The one that bolts the starter to the bell housing and not the block.

With that said, the portion that the fits behind the starter cannot be damaged but the rest of it is of no use and can be cut off.

PM on the way.

Thank you for the time,
Tom

[randy500]

I knew the need would be interesting.

[TBONE1964]

Originally Posted by randy500

I knew the need would be interesting.

Hi Randy,

I got your text with the photo. That is fine. Let me know what I owe.

Thank you,
Tom