K5 Blazer @ U Pick & Pull - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SoCoC10** · 09-12-2016, 09:59 PM

Went to a car show this weekend and was talking with the owner of a real nice Ochre and White 72 Cheyenne short bed. He said that he heard there was a K5 in a local junk yard. I went this morning and there it was...

bluek5 · 09-12-2016, 11:02 PM

That's too bad. I hate to see these trucks in the pick-n-pull yards. Around here they stay in the yard for a month or two and are gone forever. What year is it 71 or 72. Did you get any parts off of it, or are you planning to? I have an ocher Blazer that I could use a LH fender for.

**DeadheadNM** · 09-12-2016, 11:16 PM

If that is a single pane sliding window in the top i would make it worth your while to pull it for me provided its the side i need even if glass is broken.

**SoCoC10** · 09-12-2016, 11:35 PM

Quote:

Originally Posted by bluek5

That's too bad. I hate to see these trucks in the pick-n-pull yards. Around here they stay in the yard for a month or two and are gone forever. What year is it 71 or 72. Did you get any parts off of it, or are you planning to? I have an ocher Blazer that I could use a LH fender for.

I was hoping it was in better shape and less picked over, but I got a few good pieces off of it. The left fender is the best piece of sheetmetal on it. But with that said it still has a dent in it.

**SoCoC10** · 09-12-2016, 11:42 PM

Quote:

Originally Posted by DeadheadNM

If that is a single pane sliding window in the top i would make it worth your while to pull it for me provided its the side i need even if glass is broken.

I would have taken the whole top, but it has a sun roof cut in to it too. The left side slider is in tact. The right side is broken.

**DeadheadNM** · 09-12-2016, 11:51 PM

If you go back id definitely make it worth your while to grab the sliders for me.

**SoCoC10** · 09-15-2016, 12:08 AM

Still some usable pieces on the truck. The dash is uncut, has a nice pair of sun visors, front and rear differential in it, left front inner and outer fenders are usable.

OldCreek · 09-15-2016, 01:32 AM

Frankly, there looks to be a lot of useable parts on there...It's just if its worth your time/money.

Somebody's dream is sitting right there...

Got Sand · 09-17-2016, 10:26 PM

From what I can see that rig may be worth saving????

The last time I seen a K5 in a wrecking yard was in the mid 90's. it looked like it rolled down a hill and caught on fire...............but I dd manage to get a few parts off of it

hops · 09-17-2016, 10:30 PM

probably better than my P.O.S.

jjzepplin · 09-18-2016, 09:50 AM

Check the back hatch to the top!!! Worth a bunch if good and yes GRAB them sliders no matter the condition!!!

**SoCoC10** · 09-18-2016, 10:15 AM

Quote:

Originally Posted by jjzepplin

Check the back hatch to the top!!! Worth a bunch if good and yes GRAB them sliders no matter the condition!!!

Back hatch was already gone. I pulled the sliders and a few other gems for member DeadheadNM.

JimmyFloyd · 09-19-2016, 11:03 AM

That's a $3000-4000 truck in the North east, as it sits.

cleszkie · 09-19-2016, 01:37 PM

That's one of the many things I love about this network of Blazer/truck fanatics. Someone spots good stuff in a wrecking yard in one state, and makes it available to others by pulling and shipping parts. It's all about the brotherhood.

**DeadheadNM** · 09-19-2016, 09:37 PM

Quote:

Originally Posted by cleszkie

that's one of the many things i love about this network of blazer/truck fanatics. Someone spots good stuff in a wrecking yard in one state, and makes it available to others by pulling and shipping parts. It's all about the brotherhood.

x2!!

**bambbrose** · 09-20-2016, 12:23 PM

I'm a paying customer if the windshield frame isn't rusted out. I just need the top portion!

lhenryp1 · 09-23-2016, 09:27 AM

I could you the sun visor brackets

**SoCoC10** · 09-29-2016, 05:12 PM

Quote:

Originally Posted by bambbrose

I'm a paying customer if the windshield frame isn't rusted out. I just need the top portion!

You have a PM.

rayray767 · 10-06-2016, 04:40 PM

I'd take that whole passenger camper mirror if your willing to ship . But if it's all rusty I'll pass😉👍

rayray767 · 10-06-2016, 07:22 PM

I'll keep that in mind thanks Pete

joea307 · 10-16-2016, 12:16 AM

Quote:

Originally Posted by SoCoC10

Went to a car show this weekend and was talking with the owner of a real nice Ochre and White 72 Cheyenne short bed. He said that he heard there was a K5 in a local junk yard. I went this morning and there it was...

wow this makes me real sad I seen this on the road in Colorado springs 2 years ago and a story on the internet on it.
http://autoliterate.blogspot.com/201...k5-blazer.html

can you tell me what yard its in .

joea307 · 10-16-2016, 12:40 AM

here are pictures of it.

jjzepplin · 10-16-2016, 09:00 AM

WOW! That really does look like that fellas truck. Good EYE!

rayray767 · 10-16-2016, 10:01 AM

That's definitely that guys truck look at the sticker on the rear hatch

**DeadheadNM** · 10-16-2016, 11:59 PM

This window shot partially shows One of the same wheels placed in the bed

If I transplant that driver side slider I'm now going to see the former owners face staring back at me whenever I look at it. I feel a little creeped out.

09-12-2016, 09:59 PM	#1
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	K5 Blazer @ U Pick & Pull Went to a car show this weekend and was talking with the owner of a real nice Ochre and White 72 Cheyenne short bed. He said that he heard there was a K5 in a local junk yard. I went this morning and there it was... Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

09-12-2016, 11:02 PM	#2
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: K5 Blazer @ U Pick & Pull That's too bad. I hate to see these trucks in the pick-n-pull yards. Around here they stay in the yard for a month or two and are gone forever. What year is it 71 or 72. Did you get any parts off of it, or are you planning to? I have an ocher Blazer that I could use a LH fender for.

09-12-2016, 11:16 PM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: K5 Blazer @ U Pick & Pull If that is a single pane sliding window in the top i would make it worth your while to pull it for me provided its the side i need even if glass is broken. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-12-2016, 11:51 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: K5 Blazer @ U Pick & Pull If you go back id definitely make it worth your while to grab the sliders for me. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-15-2016, 12:08 AM	#7
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	Re: K5 Blazer @ U Pick & Pull Still some usable pieces on the truck. The dash is uncut, has a nice pair of sun visors, front and rear differential in it, left front inner and outer fenders are usable. __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

09-15-2016, 01:32 AM	#8
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,029	Re: K5 Blazer @ U Pick & Pull Frankly, there looks to be a lot of useable parts on there...It's just if its worth your time/money. Somebody's dream is sitting right there... __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

09-17-2016, 10:26 PM	#9
Got Sand Registered User Join Date: Jan 2015 Location: Oregon City, Oregon Posts: 77	Re: K5 Blazer @ U Pick & Pull From what I can see that rig may be worth saving???? The last time I seen a K5 in a wrecking yard was in the mid 90's. it looked like it rolled down a hill and caught on fire...............but I dd manage to get a few parts off of it

09-17-2016, 10:30 PM	#10
hops Registered User Join Date: Jun 2005 Location: Oregon Posts: 41	Re: K5 Blazer @ U Pick & Pull probably better than my P.O.S.

09-18-2016, 09:50 AM	#11
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: K5 Blazer @ U Pick & Pull Check the back hatch to the top!!! Worth a bunch if good and yes GRAB them sliders no matter the condition!!! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

09-19-2016, 11:03 AM	#13
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: K5 Blazer @ U Pick & Pull That's a $3000-4000 truck in the North east, as it sits. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-19-2016, 01:37 PM	#14
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: K5 Blazer @ U Pick & Pull That's one of the many things I love about this network of Blazer/truck fanatics. Someone spots good stuff in a wrecking yard in one state, and makes it available to others by pulling and shipping parts. It's all about the brotherhood.

09-20-2016, 12:23 PM	#16
bambbrose Active Member Join Date: Feb 2008 Location: Southern Ut Posts: 118	Re: K5 Blazer @ U Pick & Pull I'm a paying customer if the windshield frame isn't rusted out. I just need the top portion!

09-23-2016, 09:27 AM	#17
lhenryp1 Registered User Join Date: Apr 2013 Location: Texas Posts: 2	Re: K5 Blazer @ U Pick & Pull I could you the sun visor brackets

10-06-2016, 04:40 PM	#19
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: K5 Blazer @ U Pick & Pull I'd take that whole passenger camper mirror if your willing to ship . But if it's all rusty I'll pass😉👍

10-06-2016, 07:22 PM	#20
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: K5 Blazer @ U Pick & Pull I'll keep that in mind thanks Pete



Register or Log In To remove these advertisements.

10-16-2016, 12:40 AM	#22
joea307 Registered User Join Date: Nov 2012 Location: denver metro area Posts: 164	Re: K5 Blazer @ U Pick & Pull here are pictures of it. Attached Images __________________ 1972 blazer red (original medium green) 1972 blazer 4spd ,cst, a/c ,single wall top , ochre 1957 chevy 150 2 door post https://www.facebook.com/groups/19691972k5blazerjimmy/

10-16-2016, 09:00 AM	#23
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: K5 Blazer @ U Pick & Pull WOW! That really does look like that fellas truck. Good EYE! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

10-16-2016, 10:01 AM	#24
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: K5 Blazer @ U Pick & Pull That's definitely that guys truck look at the sticker on the rear hatch

10-16-2016, 11:59 PM	#25
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,479	Re: K5 Blazer @ U Pick & Pull This window shot partially shows One of the same wheels placed in the bed If I transplant that driver side slider I'm now going to see the former owners face staring back at me whenever I look at it. I feel a little creeped out. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 10-17-2016 at 12:12 AM.

Register or Log In To remove these advertisements.