CO Dana 44 Front Differential and 1/2 ton Spicer Hubs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**402Bowtie** · 09-20-2016, 04:47 PM

Have some leftover parts off a 1970 Blazer. Believe everything would crossover on a 69-72 K10 truck (minus the fact 71-72 had disc brakes)...not sure about the 67-68's.

All I have remaining are the front axle shafts. $40 for the pair.

1) Differential internals sold.

2) Used Spicer hubs off the same front end. One of the spindle nuts is not original as it says "made in China." As bluek5 mentions below, red knobs would be possible for 1970 models and blue knobs for 71-72 models. I believe everything else is original. There are some scrapes on the chrome rings and one mounting screw is missing. Everything in the 1st picture for $75 shipped with a money order or $77.55 shipped via Paypal. SOLD

**402Bowtie** · 09-20-2016, 04:48 PM

dana 44 front diff

**402Bowtie** · 09-20-2016, 04:50 PM

Believe tag says 41-11 and 3.73

bluek5 · 09-20-2016, 05:10 PM

Actually I believe it is the blue knob that is not original. I have a pair of hubs off of a 70 Blazer that were red. 71 & 72 should be blue.

**402Bowtie** · 09-20-2016, 05:15 PM

Quote:

Originally Posted by bluek5

Actually I believe it is the blue knob that is not original. I have a pair of hubs off of a 70 Blazer that were red. 71 & 72 should be blue.

Thanks for info. I thought all reds were Ford. Learned something new...

bluek5 · 09-20-2016, 05:19 PM

Fords are red, yours is just missing that four letter word.

teds72 · 09-20-2016, 09:43 PM

I would be interested in just the ring and pinon, yoke ,career and cover if you decide to part out? Thanks Ted

**402Bowtie** · 09-21-2016, 04:35 PM

Quote:

Originally Posted by teds72

I would be interested in just the ring and pinon, yoke ,career and cover if you decide to part out? Thanks Ted

Ok I will keep that in mind. I'd like to give it a week or so to see what happens.

teds72 · 09-21-2016, 05:54 PM

Ok

**DeadheadNM** · 09-21-2016, 10:40 PM

I'll jump in line for the ring & pinion w carrier, yoke, and axle tag - may be in Denver in 2 weeks and if so could pick up. Thanks. Pete

chevycc1970 · 09-22-2016, 09:47 AM

I'll take the set of lock outs.

**402Bowtie** · 09-23-2016, 04:00 PM

Lockouts sold to chevycc1970.

I'm ready to part out the axle...
teds72, for the ring, pinion, yoke, carrier, and cover I would like $65 plus shipping. I'm asking a little more because of the time involved in removing parts. Planning to use USPS flat rate box....if it would all fit in one large flat rate box it would be 18.75 for shipping.

Let us know what you decide...Deadhead is up next.

teds72 · 09-23-2016, 07:52 PM

Sounds good I will take it I can I send you a USPS money order? Thanks Ted

**402Bowtie** · 09-23-2016, 07:59 PM

Quote:

Originally Posted by teds72

Sounds good I will take it I can I send you a USPS money order? Thanks Ted

Money order will be fine. Let me see if it fits in one box before you send money order. Will try to have final amount by Sunday evening.

**402Bowtie** · 09-27-2016, 07:38 PM

teds72 I believe these are all the parts you requested--correct me if I'm wrong.

I was able to fit them all in a USPS large flat rate box, so shipping will be 18.75. Total amount with a money order will be $83.75. I'll PM you mailing address.

teds72 · 09-28-2016, 05:00 PM

USPS money order was sent today Thanks Ted

Ted Glaser
8000 Six School Road
Evansville IN 47720

**402Bowtie** · 10-11-2016, 08:26 PM

Anyone need the dana 44 axle shafts? $40 for the pair.

**402Bowtie** · 10-23-2016, 04:07 PM

Dana 44 Axle shafts in good shape. $40 for the pair

teds72 · 10-25-2016, 10:51 PM

Got the pinion parts! Thanks Ted

**402Bowtie** · 11-03-2016, 04:38 PM

Shafts still for sale

**402Bowtie** · 11-19-2016, 07:35 PM

Offers?

**402Bowtie** · 11-24-2016, 09:58 PM

Ttt

09-20-2016, 04:47 PM	#1
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Dana 44 Front Differential and 1/2 ton Spicer Hubs Have some leftover parts off a 1970 Blazer. Believe everything would crossover on a 69-72 K10 truck (minus the fact 71-72 had disc brakes)...not sure about the 67-68's. All I have remaining are the front axle shafts. $40 for the pair. 1) Differential internals sold. 2) Used Spicer hubs off the same front end. One of the spindle nuts is not original as it says "made in China." As bluek5 mentions below, red knobs would be possible for 1970 models and blue knobs for 71-72 models. I believe everything else is original. There are some scrapes on the chrome rings and one mounting screw is missing. Everything in the 1st picture for $75 shipped with a money order or $77.55 shipped via Paypal. SOLD Attached Images Last edited by 402Bowtie; 10-11-2016 at 08:25 PM.

09-20-2016, 04:48 PM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs dana 44 front diff Attached Images

09-20-2016, 04:50 PM	#3
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Believe tag says 41-11 and 3.73 Attached Images

09-20-2016, 05:10 PM	#4
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Actually I believe it is the blue knob that is not original. I have a pair of hubs off of a 70 Blazer that were red. 71 & 72 should be blue. Attached Images

09-20-2016, 05:19 PM	#6
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Fords are red, yours is just missing that four letter word. Attached Images

09-20-2016, 09:43 PM	#7
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs I would be interested in just the ring and pinon, yoke ,career and cover if you decide to part out? Thanks Ted

09-21-2016, 05:54 PM	#9
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Ok

09-21-2016, 10:40 PM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs I'll jump in line for the ring & pinion w carrier, yoke, and axle tag - may be in Denver in 2 weeks and if so could pick up. Thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-22-2016, 09:47 AM	#11
chevycc1970 Registered User Join Date: Oct 2015 Location: Elsberry Mo Posts: 224	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs I'll take the set of lock outs.

09-23-2016, 04:00 PM	#12
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Lockouts sold to chevycc1970. I'm ready to part out the axle... teds72, for the ring, pinion, yoke, carrier, and cover I would like $65 plus shipping. I'm asking a little more because of the time involved in removing parts. Planning to use USPS flat rate box....if it would all fit in one large flat rate box it would be 18.75 for shipping. Let us know what you decide...Deadhead is up next.

09-23-2016, 07:52 PM	#13
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Sounds good I will take it I can I send you a USPS money order? Thanks Ted

09-27-2016, 07:38 PM	#15
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs teds72 I believe these are all the parts you requested--correct me if I'm wrong. I was able to fit them all in a USPS large flat rate box, so shipping will be 18.75. Total amount with a money order will be $83.75. I'll PM you mailing address. Attached Images

09-28-2016, 05:00 PM	#16
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs USPS money order was sent today Thanks Ted Ted Glaser 8000 Six School Road Evansville IN 47720

10-11-2016, 08:26 PM	#17
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Anyone need the dana 44 axle shafts? $40 for the pair.

10-23-2016, 04:07 PM	#18
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Dana 44 Axle shafts in good shape. $40 for the pair Attached Images



Register or Log In To remove these advertisements.

10-25-2016, 10:51 PM	#19
teds72 Registered User Join Date: Nov 2014 Location: Evansville IN Posts: 154	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Got the pinion parts! Thanks Ted

11-03-2016, 04:38 PM	#20
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Shafts still for sale

11-19-2016, 07:35 PM	#21
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Offers?

11-24-2016, 09:58 PM	#22
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dana 44 Front Differential and 1/2 ton Spicer Hubs Ttt

Register or Log In To remove these advertisements.